User manual

IDUINO for maker’s life
www.openplatform.cc
Description:
Sharp’s GP2Y1010AU0F is an optical air quality sensor, designed to sense dust
particles. An infrared emitting diode and a phototransistor are diagonally arranged
into this device, to allow it to detect the reflected light of dust in air. It is especially
effective in detecting very fine particles like cigarette smoke, and is commonly used in
air purifier systems.
The sensor has a very low current consumption (20mA max, 11mA typical), and can be
powered with up to 7VDC. The output of the sensor is an analog voltage proportional
to the measured dust density, with a sensitivity of 0.5V/0.1mg/m3.
To interface with the sensor you need to connect to its 6-pin, 1.5mm pitch connector.
Specification
Compact, thin package (46.0 × 30.0 × 17.6 mm)
Low consumption current (Icc: MAX. 20 mA)
The presence of dust can be detected by the photometry of only one pulse
Enable to distinguish smoke from house dust
Lead-free and RoHS directive compliant
Include:
• 1 x Dust Sensor
• 6 x Dupont Line
• 1 x Resistor
• 1× Capacitor
Pinout
Pin order
Pin Name
Pin description
1
V-LED
IRED Power positive input
2
LED-GND
IRED Power negative input
3
LED
IRED switch control pin
4
S-GND
Power Ground
5
Vo
Analog voltage output
6
Vcc
Power postive