Instructions
IDUINO for maker’s life
www.openplatform.cc 29
digitalWrite (Led, HIGH);
}
else
{
digitalWrite (Led, LOW);
}
delay(1000);
}
********Code End********
Module 8:Linear Magnetic Hall Sensor (SE014)
1 Introduction
This module is analog hall sensor module, it can both output an analog and digital voltage
at the signal pin of this module. This module is different from hall magnetic sensor(Module
31), which just output digital signal, like a magnetic switch.
Specification
Operation voltage: 5V
4Pin
Size:45*12mm
Weight: 3g
2 Pinout
Pin
Description
A0
Analog output pin, real-time output voltage