Instructions

IDUINO for maker’s life
34 www.openplatform.cc
typically), self-resetting overcurrent protectors, and self-regulating heating elements.
The Module’s feature as below:
Feature
Value
Model No.
NTC-MF52 3950
Temperature Range
-55℃~+125℃
Accuracy
+/- 0.5℃
2.Pinout
Pin
Description
A0
Analog signal output pin
D0
Digital signal output pin
G
Gnd
“+”
Vcc(reference voltage:5V DC)
Temperature convert Formula
Here we use Steinhart–Hart equation to calculate the corresponding temperature. The
equation is
where:
T is the temperature (in Kelvins)
R is the resistance at T (in ohms)
A, B, and C are the Steinhart–Hart coefficients which vary depending on the type
and model of thermistor and the temperature range of interest. (The most general form
of the applied equation contains a [ln(R)]^2 term, but this is frequently neglected
because it is typically much smaller than the other coefficients).
Note: For this module, the recommended coefficients of A,B,C are
A equals 0.001129148;
B equals 0.000234125;
C equals 0.0000000876741;