Instructions

IDUINO for maker’s life
40 www.openplatform.cc
can be adjusted. Primary colors (red / blue / green) strength in order to achieve full color
mixing effect. Control of the module with the Arduino can be achieved Cool lighting effects.
And three resistor has been soldered on this board, so needn’t worry to burn out the LED
light under the long time work.
Specification
 Red Vf: 1.8 to 2.1V
 Green Vf: 3.0 to 3.2V
 Blue Vf: 3.0 to 3.2V
 Red color: 620-625 nm
 Green color: 520-525 nm
 Blue color: 465-470 nm
 Red brightness @ ~20mA: 600-800 mcd
 Blue brightness @ ~20mA: 800-1000 mcd
 Green brightness @ ~20mA: 1500-2000mcd
2. Pinout
Pin Name
Description
“R”
Red light
“G”
Green light
“B”
Blue light
“-”
Ground
3. Example
In this example, we blink an LED and using an RGB LED we can generate any color we
want.
Here is the physical connection: