Instructions

IDUINO for maker’s life
www.openplatform.cc 49
delay (15);
}
Serial.println (val, DEC);
}
********Code End********
Module 16: Two Color LED Module(3mm)
1 Introduction
This module is similar with the module 15, it also can gradually generate two kinds color,
Red and Green, from the one color to the other one. The difference is the diameter of the
LED is 3mm.The “s” pin represents Red color and the middle pin means Green color.
Specification:
 Color: Green + Red
 Diameter: 3mm
 Case Color: None
 Package Type: Diffusion
 Voltage (V) :2.0-2 .5
 Using a current (MA): 10
 Viewing angle: 150
 Wavelength (NM): 571 +644
 Luminous intensity (MCD) :20-40; 40-80
 Stent type: long-legged
2 pinout