Instructions

IDUINO for maker’s life
www.openplatform.cc 63
digitalWrite (Led, HIGH);
}
}
********Code End********
Module23: Vibration Shock module(SE053)
1 Introduction
This module is a shock switch module, and if it can detect a jolt, it output one low level
signal. Be similar with our most sensor, It has three pin: Power pin, Ground pin and signal
switch pin. That’s an interesting function to your Arduino project.
Specification
 Operation voltage: 5V
 3Pin
 Size:28*15mm
 Weight: 2g
2 Pinout
Pin
Description
S
If the sensor detect a jolt, this pin output
low level signal
+(middle pin)
Power
-
Ground