Instructions

IDUINO for maker’s life
www.openplatform.cc 73
Module27: Ball Switch sensor(SE059)
1 Introduction
This module called Ball switch sensor, just like a ball tilt switch, similar with the tilt switch.
When this module be tilted, it will output low or high signal for your control.
Specification
 Operation voltage: 5V
 3Pin
 Size:25*15mm
 Weight: 2g
2 Pinout
Pin
Description
S
If the sensor detect a tilt, this pin output
low or high level signal
+(middle pin)
Power
-
Ground
3.Example
In this example, you need connect a LED to pin13 to see when this module be rotated,
what will happen.