Instructions

IDUINO for maker’s life
92 www.openplatform.cc
light
+(middle pin)
Power
-
Ground
3.example
In this example, we use the basic sketch in the Arduino IDE, blinking this Infrared LED.
You can’t see the light through your light by your eye, but you can catch the infrared light by
a infrared receive device, like module 35, or just a camera.
The connection as below:
Example code :
******Code begin******
void setup() {
// initialize digital pin 13 as an output.
pinMode(13, OUTPUT);
}
// the loop function runs over and over again forever
void loop() {
digitalWrite(13, HIGH); // turn the LED on (HIGH is the
voltage level)
delay(1000); // wait for a second
digitalWrite(13, LOW); // turn the LED off by making the
voltage LOW