Instructions

IDUINO for maker’s life
94 www.openplatform.cc
controller, directly point the remoter to this module, which can read the hexadecimal value
of the infrared light and print on the window.
The connection as below:
Example code :
******Code begin******
# Include <IRremote.h>
int RECV_PIN = 11; // define input pin on Arduino
IRrecv irrecv (RECV_PIN);
decode_results results;
void setup ()
{
Serial.begin (9600);
irrecv.enableIRIn (); // Start the receiver
}
void loop () {
if (irrecv.decode (& results)) {
Serial.println (results.value, HEX);
irrecv.resume (); // Receive the next value
}
}******Code End******