Datasheet

IDUINO CONVERTER FTDI USB TO TTL
BN 2315241
Description:
This board converts a USB connection into a 5 volt Serial TX and RX that you can connect
straight to the Arduino Mini, Arduino Ethernet or other microcontrollers, allowing them to talk
to the computer.
One of the nice features of this board is a jumper on the back of the board that allows the
board to be configured to either 3.3V or 5V (both power output and IO level). This board ship
defaults to 5V, but you can cut the default trace and add a solder jumper if you need to
switch to 3.3V.
Specification:
• Chip: FT232RL
• RXD/TXD transceiver communication indicator
• USB power supply can choose 5V or 3.3V ,set by jumper
• With SPI interface
• Pin definition: DTR,RXD,TX,VCC,CTS,GND