Owner manual

ET-PV2BM
V-Mount Adaptor for Blackmagic Cinema Camera
Instruction Manual
Thank you for choosing the ET-PV2BM. Designed specifically for use with the Blackmagic
Cinema Camera, the ET-PV2BM attaches directly to the IDX A-CP(A) universal mounting plate,
or other 3
rd
party manufactured mounting plates. Please check which fixing positions are required
for 3
rd
party plates and use the appropriate location holes. The ET-PV2BM incorporates an
integral IDX V-Mount plate allowing direct mounting of any IDX ENDURA battery. To install,
simply connect the DC power output cable to the DC-IN connector of the camera.
The ET-PV2BM has a D-Tap DC-OUT connector that supplies power directly from the battery
allowing the use of professional on-board camera lights or other accessories. Please note, this is
an unregulated output.
Specifications
Dimensions: 82.5(w) x 142(h) x 12(d) mm
Weight: 210g approx.
Cable output voltage: 12~17V
D-Tap output voltage: 12~17V
Maximum output for D-Tap: 50W
Cable length: 1m approx.
Included accessories: M3 (8mm) screw x 4
General Notes & Safety
Do not attempt to open or modify this unit. All work should be carried out by IDX authorised
service personnel only.
Do not attach the ET-PV2BM to any non-compatible video camera or equipment as it may cause
defect, damage or other incidents. Please read this Instruction Manual carefully before use.
When connecting a battery or adaptor to the ET-PV2PM, be sure to connect firmly. If it is not
attached properly, it may result in loss or damage to the unit or even injury to the user.
Do not expose to, use or place the unit in direct sunlight, extreme dust or other hazardous
environments.
A short between the plus (+) and minus (-) charge pins may cause fire, electrical shock or other
incidents.
Stop using immediately in case of abnormal smell, leak, colour change or deformity during use.
If you need any inspection or repairs, please contact your local IDX dealer or IDX office.
IDX Technology Europe, Ltd.
Unit 9 Langley Park, Waterside Drive, Langley, Berkshire SL3 6EZ, ENGLAND
Tel: [phone]
Fax: [phone]
Email: [e-mail]
www.idx-europe.co.uk
20121812
ET-PV2BM
V-Mount Adaptor for Blackmagic Cinema Camera
Instruction Manual
Thank you for choosing the ET-PV2BM. Designed specifically for use with the Blackmagic
Cinema Camera, the ET-PV2BM attaches directly to the IDX A-CP(A) universal mounting plate,
or other 3
rd
party manufactured mounting plates. Please check which fixing positions are required
for 3
rd
party plates and use the appropriate location holes. The ET-PV2BM incorporates an
integral IDX V-Mount plate allowing direct mounting of any IDX ENDURA battery. To install,
simply connect the DC power output cable to the DC-IN connector of the camera.
The ET-PV2BM has a D-Tap DC-OUT connector that supplies power directly from the battery
allowing the use of professional on-board camera lights or other accessories. Please note, this is
an unregulated output.
Specifications
Dimensions: 82.5(w) x 142(h) x 12(d) mm
Weight: 210g approx.
Cable output voltage: 12~17V
D-Tap output voltage: 12~17V
Maximum output for D-Tap: 50W
Cable length: 1m approx.
Included accessories: M3 (8mm) screw x 4
General Notes & Safety
Do not attempt to open or modify this unit. All work should be carried out by IDX authorised
service personnel only.
Do not attach the ET-PV2BM to any non-compatible video camera or equipment as it may cause
defect, damage or other incidents. Please read this Instruction Manual carefully before use.
When connecting a battery or adaptor to the ET-PV2PM, be sure to connect firmly. If it is not
attached properly, it may result in loss or damage to the unit or even injury to the user.
Do not expose to, use or place the unit in direct sunlight, extreme dust or other hazardous
environments.
A short between the plus (+) and minus (-) charge pins may cause fire, electrical shock or other
incidents.
Stop using immediately in case of abnormal smell, leak, colour change or deformity during use.
If you need any inspection or repairs, please contact your local IDX dealer or IDX office.
IDX Technology Europe, Ltd.
Unit 9 Langley Park, Waterside Drive, Langley, Berkshire SL3 6EZ, ENGLAND
Tel: [phone]
Fax: [phone]
Email: [e-mail]
www.idx-europe.co.uk
20121812
E & OE E & OE