User Guide

I
II
1)Can Scan various 1D codes/QR codes, directly transmit
Chinese QR code
2) USB Bluetooth receiver, plug and play, easy to set up;
3) Wireless Bluetooth transmission distance reaches 30-
50 meters (open space)
4) 512,000 characters can be stored in the offline/counter
storage mode
5) Can be paired with Bluetooth-enabled mobile phones,
tablets, and laptops
Feature:：

1D:EAN,UPC,Code 39,Code 93,Code
128,UCC/EAN 128, Codabar，Interleaved
2 of 5, ITF-6,ITF-14,ISBN,ISSN, MSI-
Plessey,GS1Databar,GS1 Composite
Code,Code11,Industrial 25,Standard
25,Plessey, Matrix 2 of 5
2D:QR Code, Data Matrix,PDF417,Micor
PDF417,Aztec,Maxicode， Hanxin code ，
Directly transmit Chinese QR code
Version
Structure Chart:
Power indicator: blue LED
Bluetooth pairing indicator: red LED
Charging pairing indication: green LED
Indicator
Button
USB
dongle
Charging
interface
Technical parameters:
Barcode Scanner
spec
617nm LED Aimer,White LED
Data item
Light Sources
Decoding
capability
Minimum Element
Resolution
Scan Type
Scan Mode
Scan angle
Interface
Cable Length
Error Rate
Material
Voltage
Working
current
Shock
Resistance
Working
Temperature
Storage
Temperature
Relative
Humidity
≥5mil
Image CMOS
Manually/Continuous/Auto-sensing scanning
Yaw ±65°, Rotation 360°, Pitch ±60°
USB-HID
1.2M
Less than 1/5 million
ABS+PC
DC5V±1%
Working status 280mA
withstand multiple 3 meters free fall
-20℃ - 50℃
-40℃- 70℃
5%~95% (Non-condensing)
Keyboard ON or OFF in IOS
device
Wired mode
Wired transmission
Note:this barcode scanner can use as wired
through an extra data cable ,just need to scan
above code.
Wireless Mode
Normal
Automatic Storage
(default)
Inventory
Data upload instruction in Inventory Mode
Upload all data Upload new data
Display all data Display new data
Scan Mode
Manual(default)
Continuous
Auto-sensing
Suffix Setting
CR(default)
CR&LF
None
TAB
Pair instruction:
A:Barcode Scanner pair with Cradle
Step 1,Scan Below Pairing Code I , Code II
in sequence,and the scanner LED indicator
become red and flashing
Step 2,Connect the Cradle to host device
through the data cable and wait a second ,the
LED indicator both become blue on barcode
scanner and cradle after succeed pair
B:Barcode scanner pair with bluetooth device
Step 1,Scan Below Pairing Code I, Code II in
sequence,and the scanner LED indicator become
red and flashing
I
II
Step 2,Open bluetooth in the bluetooth device
and search for the barcode scanner which
named “R&B40 and click connect ,wait a second ,
the barcode scanner LED indicator becomes red
after succeed pair
Note : Scan above QR code to enable or disable
Keyboard in the IOS device
Note:
(1) Normal Mode:the data will be uploaded to
host device immediately after scan ,out of
range it will not save the data ,and there will
be 2 alarm beeps out of range;
(2) Inventory Mode:the data will be saved in
the memory chip ,and upload data to host
device as instructed ;
(3) Automatic storage Mode:the data will be
uploaded to host device immediately after
scan if the scanner in range ,the data will saved
in the memory chip if the scanner out of range
which will heard 2 alarm beeps,press the
scanner trigger to upload the saved data
after back to range,and the original data in
the memory chip will be cleared .
Eg: scan the “upload all data and clear”, the
scanner will upload all data saved in the memory
chip and cleared the original data.
Data delete
Factory Default
Note:Scan below Code A,Code B,Code C in
order to return factory default.
A B
C
User Guide
2D Bluetooth & 2.4G
Barcodee Scanner
ＩＤＺＯＲ ９８００ＢＴ