User Manual

ACT-457A Panel PC
Page 32
Label Description
Allows the user to select the serial port used by the ACT-457A to
communicate with the RFID reader module.
Commands Area
Shows various request options for user to select.
Data Input Area
The data input area is where the user enters block number, key, key data,
and other information required by certain commands.
Raw Data Display Area
Shows all communication logs and responses of the executed commands.
EM Card ID Display Area
Displays the EM card ID when the EM card is detected.
Mifare Card ID Display Area
Displays the Mifare card ID when the Mifare card is detected.
Error Code Display Area
Shows the error message when an error occurs.
Table 3-1: RFID Interface Overview
3.4 Serial Port (COM) Settings
After launching the RF320 RFID tool, the COM port settings have to be set correctly to
enable the communication with the built-in RFID reader. Please follow the information
below to setup the COM port settings.
Model COM Port Baud Rate
ACT-457A COM 2 19200
Table 3-2: RF320 COM Port Settings