Manual

AFL-08B-N270 User Manual
Page 47
2.7.3 USB Device Connection
There are four external USB 2.0 connectors. All connectors are perpendicular to the
AFL-08B-N270. To connect a USB 2.0 or USB 1.1 device, please follow the instructions
below.
Step 1: Located the USB connectors. The locations of the USB connectors are shown
in Chapter 2.
Step 2: Align the connectors. Align the USB device connector with one of the
connectors on the bottom panel. See Figure 2-21.
Figure 2-21: USB Device Connection
Step 3: Insert the device connector. Once aligned, gently insert the USB device
connector into the onboard connector. Step 0:
2.8 Power Connection
The power cable connects the power adapter to the power outlet. The power adapter and
power cable are required for operation of the panel PC.