Owner manual

AFOLUX AFL-15A-N270 Panel PC
Page 45
4.9.3 CF Card Setup
Jumper Label: JCF1
Jumper Type:
2-pin header
Jumper Settings:
See Table 4-3
Jumper Location:
See Figure 4-6
The CF Card Setup jumper sets the CF Type I card or CF Type II cards as either the slave
device or the master device. CF Card Setup jumper settings are shown in
Table 4-3.
CF Setup Description
Open Slave Default
Closed Master
Table 4-3: CF Card Setup Jumper Settings
The CF Card Setup jumper location is shown in Figure 4-6.
Figure 4-6: CF Card Setup Jumper Location