AUPS IEI Technology Corp. AUPS UART PROTOCOL SPECIFICATION Programmer Reference Manual Version 1.
AUPS IEI Technology Corp. Revision History Revision Issue Date Comments V1.0 2007/6/5 Initial release V1.1 2008/6/20 Add protocol V1.2 2008/8/11 Add LAN function protocol V1.3 2008/12/10 Modify read protocol and add Board type command(0x6A) V1.4 2009/10/15 Add COM port configuration V1.
AUPS IEI Technology Corp.
AUPS IEI Technology Corp.
AUPS IEI Technology Corp. Command List You can use following pre-defined commands un the application to communicate with MCU and to receive data returned from MCU.
AUPS IEI Technology Corp.
AUPS IEI Technology Corp.
AUPS IEI Technology Corp.
AUPS IEI Technology Corp.
AUPS IEI Technology Corp.
AUPS IEI Technology Corp. AP SEND MCU RAED Temperature Command: AP->MCU: Command:<02><01><08><0B><0D> STX:0x02 Length:0x01 Command:0x08 CR:0x0D Checksum: (0x02+0x01+0x08)MOD 0x100 = 0x0B MCU Response AP Temperature Value: MCU->AP: Response:<02><03><08><0B><0D> STX:0x02 Length:0x03 Command:0x08 Data:0x0BA5 CR:0x0D Checksum: (0x02+0x03+0x08+0x0B+0xA5)MOD 0x100 = 0XBD Return Value:0x0BA5(2981°K) °K Absolute temperature °C Celsius temperature [ °K -> °C ] Formula [ °K / 10 – 273 = °C ] Example 25.