Manual
A
U
PS IEI T
echnology
Corp
.
- 10 -
Example
AP SEND MCU RAED Voltage Command:
AP->MCU
:
Command：<02><01><09><0C><0D>
STX：0x02 Length：0x01 Command：0x09 CR：0x0D
Checksum：（0x02＋0x01＋0x09）MOD 0x100 ＝ 0x0C
MCU Response AP Voltage Value:
MCU->AP:
Response：<02><03><09><3E><80><CC><0D>
STX：0x02 Length：0x03 Command：0x09 Data：0x3E80 CR：0x0D
Checksum：（0x02＋0x03＋0x09＋0x3E＋0x80）MOD 0x100 ＝ 0Xcc
Return Value:0x3E80(16000mV)
AP SEND MCU RAED IP Address Command:
AP->MCU
:
Command：<02><01><50><53><0D>
STX：0x02 Length：0x01 Command：0x50 CR：0x0D
Checksum：（0x02＋0x01＋0x50）MOD 0x100 ＝ 0x53
MCU Response AP IP Address:
MCU->AP:
Response：<02><05><50><A9><FE><01><01><00><0D>
STX：0x02 Length：0x05 Command：0x50 Data1:0xA9
Data2:0xFE Data3: 0x01 Data4 :0x01 CR：0x0D
Checksum：（0x02＋0x05＋0x50＋0xA9＋0xFE＋0x01＋0x01）MOD 0x100 ＝ 0x00
Return IP Address: A9: FE: 01: 01
AP SEND MCU Write IP Address Command:
AP->MCU:
Command+ data：<02><05><51><A9><FE><01><01><01><0D>
STX：0x02 Length：0x05 Command：0x51 Data1:0xA9
Data2:0xFE Data3: 0x01 Data4 :0x01 CR：0x0D
Checksum：（0x02＋0x05＋0x51＋ 0xA9＋0xFE＋ 0x01＋ 0x01）MOD 0x100＝0x01
Notes: Angle brackets < > : indicate data in hex value.