Manual

A U PS IEI T echnology Corp .
- 5 -
Command List
 You can use following pre-defined commands un the application to communicate with
MCU and to receive data returned from MCU.
Command List:
Command Description Return bytes
0x01 Select Smart Battery A None
0x02 Select Smart Battery B None
0x22 Read Smart Battery Type ( LION: 4C and NIMH: 4E ) 1 byte
0x09 Read Smart Battery Output Voltage ( mV ) 2 byte
0x0A Read Smart Battery Electric Current ( mA ) 2 byte
0x08 Read Smart Battery Internal Temperature ( ºC ) 2 byte
0x0F Read Smart Battery Capacity ( % ) 2 byte
0x11 Read Smart Battery Discharging Time ( Minute ) 2 byte
0x40 Read Smart Battery Status 1 2 byte
0x41 Read Smart Battery Status 2 2 byte
0x42 Read MCU Firmware Version 1 byte
0x43 Enable Buzzer None
0x44 Disable Buzzer None
0x45 Turn On UPS Output None
0x46 Turn Off UPS Output None
0x47 Enable LAN None
0x48 Disable LAN None
0x50 Read IP Address 4 byte
0x51 Write IP Address 4 byte
0x52 Read Gateway 4 byte
0x53 Write Gateway 4 byte
0x54 Read Primary DNS 4 byte
0x55 Write Primary DNS 4 byte
0x56 Read Secondary DNS 4 byte
0x57 Write Secondary DNS 4 bytes