Owner manual

DM Series Industrial Monitor
Page 2
Revision
Date Version Changes
15 July, 2009 1.14
Updated “Chapter
6: OSD Controls”
April, 2008 1.13 Added DM-121GX models information
Added DM-190 rack mount installation
Added the smartOSD appendix
July, 2007 1.12 Cautions for VESA mounting kit are added in p46, p140
May, 2007 1.11 AV-5300 AD Board CN25 connector pin 3 voltage changed to
+9V~+36V input
April, 2007 1.10 Updated Figure 1-3 and Section 4.4 for AV-5300 AD Board V2.0
March, 2007 1.01 Correct Figure 4-14 labeling
Revised CN7 connector as 12V power
Revised CN7 connector as 12V power; added connector pinouts
Correct LVDS connector label
July, 2006 1.00 Initial Release