User's Manual

Page 15
Setup
WARNING The labels on the external box are best to be read at a distance
of 30 cm due to the small label size.
To unpack the DS-101, follow the steps below:
1. Use box cutters, a knife or a sharp pair of scissors that seals the box.
2. Open the box.
3. Lift the DS-101 out of the box.
4. Pull the plastic cover off the DS-101.
5. Make sure all the components listed in the packing list are present.
Packing list
The DS-101 is shipped with the following components:
Note If any of these items are missing or damaged, contact the distributor
or sales representative immediately.
Quantity Description Model Name Image
DS-101
1 Panel PC DS-101
1 AC adaptor 3P ADP-101
1 Power cord
USB-BOX
1 Multiport Data
Collector
HS-101