Manualshelf

User's Manual

ManualsBrandsIEI Integration ManualsElectronics802.11abgn Bluetooth Mini PCIe module
11121314151617181920
Page 18
Hardware installation
Installation precautions
WARNING Failure to take installation precautions during the maintenance
of the device may result in permanent damage to the device and severe
injury to the user.
When installing the DS-101, please follow the precautions listed below:
1. Install and keep the instrument away from splashing water.
2. Protect the instrument from shock and vibration while transporting it.
3. Do not install the instrument where humidity, ventilation, or direct sunlight.
4. Do not install the instrument in a chemical storage area or where gas is generated.
Mounting the system
The DS-101 came with a USB-BOX and a stand. To mount the USB-BOX and the stand, follow the
steps below.
1. Secure the USB-BOX to the stand with four flat-head retention screws.
2. Secure the stand to the rear panel of the DS-101 with four retention screws.