User's Manual

Page 30
l RESP: the number of breaths
l TEMP: press TEMP to enter the page with detail temperature information
Large screen
Patient information, battery life, dates and countdown timer are displayed at the top of the page in the
Monitor Large Mode. The countdown timer in green indicates the remaining time for next auto blood
pressure check. If the number is absent, that means the auto check function is disabled.
Other displayed values are described below:
l HR: heart rate. A heart icon and a beep will be generated every time the ECG peak
is detected. The numbers under bpm on the right indicate the normal range of heart
rate. If the heart rate exceeds the normal range, the warning sound and icon will be
triggered.
l PR: pulse rate (displayed when SpO2 is selected without ECG channel). A beep will
be generated every time the SpO2 peak is detected.
l SpO2: oxygen saturation
¡ The five blocks on the left show the level of heart beat strength. The three
blocks on the top show the level of the signal strength.
¡ The number beside the percentage sign (%) indicates the normal range. If the
oxygen saturation exceeds the normal range, the warning sound and icon will
be triggered.
l RESP: the number of breaths. The block on the left blinks every time a breath is
detected.
l TEMP: press TEMP to enter the page with detail temperature information
l NIBP: blood pressure
¡ The block on the left blinks every time blood flow is detected.
¡ Sys in orange: Systolic pressure. The small number on the side indicates the
normal range of systolic pressure. If the systolic pressure exceeds the normal