User's Manual

Page 58
ECG cascade mode
l ECG lead is displayed on the left side of the screen.
l Calibration bar linked to the ECG sensitivity is displayed on the left side of the screen.
l Touch the screen to fix the waveform.
WARNING If the system shows “LEAD OFF”, please refer to the trouble
shooting section
ECG Electrode Placement
Please place electrode as below graph
ECG Alarm
1. Touch the Menu key.
2. Touch the Alarm Setting key.
3. Heart Rate is displayed in the HR/PR key and the green line on the bar graph
4. To set the Hart Rate alarm limits, use the arrow key on the right side of the screen to
follow these steps:
l Touch the Lower Limit key, change limit using arrow key.
l Touch the Upper Limit key, change limit using allow key.
l Alarm limit is changed immediately.
5. If you want to turn off the alarm, press the HR/PR key to make it black.