User's Manual

Page 66
l When measuring blood pressure, cuff pressure is displayed and pulsation is indicated
by vertical bar graph.
NIBP measure window
Touch the NIBP frame except the start/stop key opens a NIBP Measure window
l The frame can display Systolic and Diastolic measurements.
l You can see blood pressure alarm limits. (Upper and Lower)
l You can see previous NIBP measurement data.
l When blood pressure is measured, a graph of cuff pressure and pulsation is displayed.
NIBP Alarm
1. Touch the Menu key.
2. Touch the Alarm Setting key.
3. Sys Dia is displayed in the NIBP key and the green line on the bar graph.
4. To set the NIBP alarm limits, use the arrow key on the right side of the screen to follow
these steps:
l Touch the Lower Limit key, change limit using arrow key.
l Touch the Upper Limit key, change limit using allow key.
l Alarm limit is changed immediately.
5. If you want to turn off the NIBP alarm, press the NIBP key to make it black.