User's Manual

Page 71
WARNING Patient injury risk. Prior to taking a temperature, instruct the
patient not to bite down on the probe as patient injury and damage to the
probe may result.
Caution Probe covers are disposable, nonsterilized, and single-use.
Probes are also nonsterilized. Do not autoclave proves and probe covers.
Ensure that prove covers are disposed of according to facility
requirements or local regulations.
1. Press the power button on the thermometer to turn it on. Sounds urge measurement
2. Insert the probe into a new probe cover.
3. Hold the probe tip in place at the measurement site.
l For oral temperatures, place the probe tip under the patient’s tongue on either side of the
mouth to reach the sublingual pocket and ask the patient to close his/her lips.
l For axillary temperatures, lift the patient’s arm so that the entire axilla is easily seen and
place the probe tip as high as possible in the mid-axilla. Verify that axillary tissue
completely surrounds the probe tip and place the arm snugly at the patient’s side.
4. While the measurement is taking place, the thermometer sounds a tone.
5. The thermometer sounds a burst tone when the final temperature is reached (in
approximately 6 to 15 seconds).
6. Touch the temperature frame, temperature measurement screen displayed.
7. Touch the thermometer to NFC area of the monitor
NFC area
8. Sounds when the monitor receives temperature data from the thermometer. The temperature
measure screen displays the temperature.
9. You can check the previous temperature data on record frame.