User's Manual

Page 75
Turn on when AC noises enter even if electrode and lead wires are adjusted.
8. Turn on the Pacing Detect with the intended use.
l Used for pacemaker patients.
l Pacing Detection is on, the DS-101 displays pacemaker signals exactly as they are
captured.
12 Lead ECG Electrode Placement
For 12 lead ECG, please place electrode as below graph
12 Lead ECG Measurement
Measurement value can be obtained by pressing the analysis button and measuring the 12L
ECG for 10 seconds
1. Monitor the 12L ECG.
2. If you want to go back to Monitoring mode, Touch EXIT button.
3. Display monitoring condition with bottom area.
4. You can change the sensitivity by touch the Gain button
5. Touch ANALYZE key when ECG waveform stabilizes.
6. Measured value is displayed after taking in the waveform for 10 seconds