Manual
Table Of Contents
- 1 Introduction
- 2 Detailed Specifications
- 3 Unpacking
- 4 Connectors
- 4.1 Peripheral Interface Connectors
- 4.2 Internal Peripheral Connectors
- 4.2.1 BIOS Battery Connector
- 4.2.2 CompactFlash® Socket
- 4.2.3 Digital I/O Connector
- 4.2.4 Fan Connector
- 4.2.5 Front Panel Connector
- 4.2.6 IDE Connector
- 4.2.7 Infrared Interface Connector
- 4.2.8 Keyboard/Mouse Connector
- 4.2.9 LCD Backlight Inverter Connector
- 4.2.10 LED Connector
- 4.2.11 LVDS LCD Connector
- 4.2.12 MCU LAN Connector
- 4.2.13 PCIe Mini Card Slot
- 4.2.14 Power Connectors
- 4.2.15 SATA Drive Connectors
- 4.2.16 SATA Power Connectors
- 4.2.17 Serial Port Connectors (RS-232)
- 4.2.18 Serial Port Connectors (RS-422/485)
- 4.2.19 SO-DIMM Socket
- 4.2.20 SPDIF Connector
- 4.2.21 TV Out Connector
- 4.2.22 USB Connectors
- 4.3 External Peripheral Interface Connector Panel
- 5 Installation
- 6 BIOS Setup
- 7 Software Installation
- 8 Battery Monitoring
- A BIOS Options
- B Terminology
- C Digital I/O Interface
- D Watchdog Timer
- E Address Mapping
- F Hazardous Materials Disclosure

eKINO-945GSE Motherboard
Page 13
The SO-DIMM socket is shown in Figure 2-4 below.
2.4.2 Graphics
The Intel® 945GSE Northbridge chipset has an Intel® Gen. 3.5 integrated graphics
engine that supports the following display devices (shown in
Figure 2-4):
Analog CRT
LVDS
TV-Out
SDVO ports
2.4.2.1 Analog CRT (VGA)
A DB-15 VGA connector on the external peripheral interface connector panel is interfaced
to the Intel® 945GSE graphics engine. The Intel® 945GSE internal graphics engine, with
an integrated 400 MHz RAMDAC and hot plug CRT support, supports analog CRT
monitors up to QXGA.
2.4.2.2 LVDS
A 30-pin LVDS crimp connector is interfaced to the Intel® 945GSE graphics engine. The
Intel® 945GSE internal graphics engine supports LVDS displays with the following
features:
Up to UXGA monitors with a maximum resolution of 1600 x 1200
18-bit 25 MHz to 112 MHz single-channel or dual-channel LVDS screens
CPIS 1.5 compliant LVDS screens
2.4.2.3 TV Out
An external 7-pin DIN TV output connector is interfaced to the Intel® 945GSE graphics
engine. The Intel® 945GSE internal graphics engine has the following TV output features:
Three integrated 10-bit DACs
Macrovision support
Overscaling
NTSC and PAL formats supported










