Manual

eKINO-945GSE Motherboard
Page 73
Pin Setting Description
Open 640 x 480 (18-bit)
1-2 800 x 480 (18-bit)
3-4 800 x 600 (18-bit)
1-2, 3-4 1024 x 768 (18-bit)
5-6 1280 x 1024 (18-bit)
1-2, 5-6 1400 x 1050 (18-bit)
3-4, 5-6 1400 x 900 (18-bit)
1-2, 3-4, 5-6 1600 x 1200 (18-bit)
Table 5-6: LCD Panel Type Selection Jumper Settings
5.7.6 LVDS Voltage Selection
WARNING:
Permanent damage to the screen and eKINO-945GSE may occur if the
wrong voltage is selected with this jumper. Please refer to the user
guide that cam with the monitor to select the correct voltage.
Jumper Label: J_VLVDS1
Jumper Type:
3-pin header
Jumper Settings:
See
Table 5-7
Jumper Location:
See
Figure 5-4
The LVDS Voltage Selection jumper allows the LVDS screen voltage to be set. The
LVDS Voltage Selection jumper settings are shown in
Table 5-7.
Pin Setting Description
1-2 3.3 V
2-3 5 V
Table 5-7: LVDS Voltage Selection Jumper Settings