HDC-502E Video Capture Card IEI Technology Corp. MODEL: HDC-502E Video/Audio Capture Card with SDI Input Channel,1920x1080@60p, and Hardware H.264 Codec User Manual Page I Rev. 2.
HDC-502E Video Capture Card Revision Date Version Changes 27 November, 2012 2.00 Updated for V2.00 software version and latest specifications 15 November, 2011 Page II 1.
HDC-502E Video Capture Card Copyright COPYRIGHT NOTICE The information in this document is subject to change without prior notice in order to improve reliability, design and function and does not represent a commitment on the part of the manufacturer. In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or documentation, even if advised of the possibility of such damages.
HDC-502E Video Capture Card Table of Contents 1 INTRODUCTION.......................................................................................................... 1 1.1 OVERVIEW.................................................................................................................. 2 1.2 FEATURES ................................................................................................................... 2 1.3 APPLICATIONS .................................................................
HDC-502E Video Capture Card 4.5 FAQ ......................................................................................................................... 29 A HAZARDOUS MATERIALS DISCLOSURE ......................................................... 30 A.1 HAZARDOUS MATERIAL DISCLOSURE TABLE FOR IPB PRODUCTS CERTIFIED AS ROHS COMPLIANT UNDER 2002/95/EC WITHOUT MERCURY .......................................
HDC-502E Video Capture Card List of Figures Figure 1-1: HDC-502E Video Capture Card ..................................................................................2 Figure 1-2: HDC-502E Connector Overview.................................................................................3 Figure 1-3: HDC-502E Dimensions (mm) .....................................................................................6 Figure 2-1: HDC-502E Installation................................................................
HDC-502E Video Capture Card List of Tables Table 1-1: Specifications ...............................................................................................................5 Table 2-1: Package List Contents .................................................................................................
HDC-502E Video Capture Card Chapter 1 1 Introduction Page 1
HDC-502E Video Capture Card 1.1 Overview Figure 1-1: HDC-502E Video Capture Card The low power HDC-502E video capture card supports 1080p full HD video via SDI connection. The HDC-502E video capture card is equipped with a high-performing codec component featuring two SDI video input channels and two SDI audio input channels.
HDC-502E Video Capture Card 1.3 Applications Some possible applications include: Video games DVD/Blue-ray player Camcorder Video surveillance Video analyzer Video post production 1.4 Connector Overview The following section introduces the connectors on the HDC-502E. The HDC-502E comes with two SDI input and two loop through connectors. A PCIe edge connector on the bottom of the capture card enables the HDC-502E to interface with a motherboard.
HDC-502E Video Capture Card 1.5 Specifications The HDC-502E specifications are listed in the table below: HDC-502E Video Input Channels Two Video Input Type SDI Audio Input Channels Two Audio Input Type SDI Loop Through Channels Two Loop Through Type SDI Interface PCIe x1 VIDEO PROCESSING Video Engine H.264/AVC High Profile Level 4.
HDC-502E Video Capture Card HDC-502E Linux: Fedora 16 (Kernel 3.1.0) SOFTWARE SUPPORT Device Driver Driver for Windows XP, Windows 7 and Linux Fedora 16 SDK provided with demo program and sample source code Windows: Provide SDK and demo program with sample source SDK code in C# Linux: Provide SDK and driver/demo program with sample source code in C OTHERS Dimensions (WxH) (mm) 188 mm x 125 mm Operating Temperature 0ºC ~ 60ºC (32ºF ~ 140ºF), non-condensing Power Consumption 14.2 W (12 V @ 0.76 A, 3.
HDC-502E Video Capture Card 1.6 Dimensions The dimensions for the HDC-502E are listed in the following sections.
HDC-502E Video Capture Card Chapter 2 2 Hardware Installation Page 7
HDC-502E Video Capture Card 2.1 Unpacking 2.1.1 Anti-static Precautions WARNING: Failure to take ESD precautions during the installation of the video capture card may result in permanent damage to the capture card and severe injury to the user. Electrostatic discharge (ESD) can cause serious damage to electronic components, including the video capture card. Dry climates are especially susceptible to ESD.
HDC-502E Video Capture Card 2.1.3 Unpacking Checklist NOTE: If some of the components listed in the checklist below are missing, please do not proceed with the installation. Contact the IEI reseller or vendor you purchased the video capture card from or contact an IEI sales representative directly. To contact an IEI sales representative, please send an email to sales@iei.com.tw.
HDC-502E Video Capture Card Step 2: Install the SDI source equipment. Step 0: Once the steps above have been completed, the hardware installation procedures are complete. 2.3 Video Capture Card Installation The HDC-502E video capture card has a PCIe x1 interface. To install the HDC-502E, please follow the steps below: Step 1: Align the PCIe edge connector on the bottom of the video capture card with the PCIe slot on the system motherboard (Figure 2-1).
HDC-502E Video Capture Card 2.4 SDI Device Installation Various devices can be connected to the HDC-502E. Video input and video output are all supported. Follow the steps below to connect devices to the HDC-502E. Step 1: Insert the SDI cable connector into the SDI port on the HDC-502E. Make sure the connection is secure. Step 2: Connect the other end of the SDI cable to the device. Make sure the connection is secure. Step 3: Repeat steps 1 and 2 until all devices are connected.
HDC-502E Video Capture Card Chapter 3 3 Driver and Application Installation (Windows) Page 12
HDC-502E Video Capture Card 3.1 Overview A CD is shipped with the video capture card. The CD contains a driver for the video capture controllers on the card. When the video capture card is installed on the system, the driver must be installed. Failure to install the driver means that the video capture card cannot be detected by the system. NOTE: The Found New Hardware Wizard will automatically start when the system detects the video capture card.
HDC-502E Video Capture Card Figure 3-1: Windows Security Step 5: If the following window appears, click Install this driver software anyway.
HDC-502E Video Capture Card Step 6: The Device Driver Installation Wizard appears. Click Next to start. Figure 3-3: Device Driver Installation Wizard Step 7: The video capture card driver starts to install and the screen in Figure 3-4 appears. Figure 3-4: Driver Installing Step 8: When the driver installation is complete, the screen in Figure 3-5 appears. Click Finish to exit.
HDC-502E Video Capture Card Figure 3-5: Driver Installation Complete Step 9: Check the device manager in the Windows control panel to ensure the driver (MB86H55-REB PCI, HDC controller and WinDriver) has been properly installed. See Figure 3-6 for the details.
HDC-502E Video Capture Card 3.2.1 Driver Installation in 64-bit Windows 7 OS To install the driver in a 64-bit Windows 7 operating system, please do the followings. Step 1: Make sure to log in the system as the administrator. Step 2: Insert the driver CD. Step 3: Run a Command Prompt as an administrator (right click the Command Prompt and select Run as administrator). Step 4: In the Command Prompt window, specify the 64-bit driver directory. Then, type DriverInstaller.bat to start the driver installation.
HDC-502E Video Capture Card Figure 3-8: Device Manager – 64-bit OS 3.2.2 Uninstall Driver To uninstall the driver, please follow the steps below. Step 1: Make sure to login the system as the administrator. Step 2: Locate the “Driveruninstaller.bat” file in the driver CD. Double click it to uninstall the driver. Step 3: The console window pop-up and all drivers will be uninstalled.
HDC-502E Video Capture Card 3.3 Software Installation The HDC-502E comes with a video capture application – HDCapture. This section describes how to install the application in Windows environment. 3.3.1 System Requirements The supported OS versions are listed below: Microsoft Windows XP SP2 32-bit Microsoft Windows 7 32-bit Microsoft Windows 7 64-bit After installing the driver, the following programs must be installed in order to use the HDCapture demo program: Microsoft .NET Framework 3.
HDC-502E Video Capture Card 3.3.2 HDCapture Program Installation To install the HDCapture demo program, please follow the steps below. NOTE: If the User Access Control dialog box appears during installation, click Yes to continue. Step 1: Insert the driver CD. Step 2: Locate the HDCapture_x86_Vxxxx.msi file in the driver CD. Double click the setup file to start the installation. The user can also download the latest setup file from IEI website. Step 3: The HDCapture Setup Wizard welcome window appears.
HDC-502E Video Capture Card Step 4: Select a folder for HDCapture installation in Figure 3-10. Click Next to continue. Figure 3-10: Select Installation Folder Step 5: The following screen appears. Click Next to confirm the installation. Figure 3-11: Confirm Installation Step 6: The system starts installing the HDCapture.
HDC-502E Video Capture Card Step 7: When the HDCapture is successfully installed, the following window appears. Click Close to exit.
HDC-502E Video Capture Card Chapter 4 4 HDCapture Application (Windows) Page 23
HDC-502E Video Capture Card 4.1 HDCapture Overview The HDCapture application is a video capture tool that allows user to capture video through the SDI input ports in Windows environment. NOTE: If you cannot open the application in the 64-bit Windows 7 operating system, right-click the HDCapture application from the root installed directory, and click Run as administrator. 4.2 Video Configuration To configure the HDCapture software, follow the steps below.
HDC-502E Video Capture Card Step 2: Enable and configure the device settings by clicking the Device # (0, 1) buttons. The device number is decided by which port the device is installed. Figure 4-2: HDC-502E Device Ports Step 3: Click the Device # button. The Encoding window appears (Figure 4-3). Choose the video input format which depends on the video device. The available options include: 1920x1080 (60p) (6000kps – 20000kps) 1920x1080 (59.
HDC-502E Video Capture Card bitrate (must be in the range of video format). When “CBR” is selected, the “Bitrate” text box is displayed. When “VBR” is selected, the “Average bitrate” and “Peak bitrate” text boxes are displayed. Close the window to save the settings. Figure 4-3: Encoding Settings Step 5: Repeat Step 2 ~ Step 4 to configure the connected input device.
HDC-502E Video Capture Card 4.3 Video Capture To use the HDCapture to capture video, follow the steps below. Step 1: Click Start to start capturing video (Figure 4-4). Figure 4-4: Capturing Video Step 2: Click Stop to stop capture.
HDC-502E Video Capture Card 4.4 Uninstall HDCapture To uninstall the HDCapture, follow the steps below. Step 1: Select Control Panel Æ Programs Æ Programs and Features. Step 2: Select HDCapture and click the Uninstall button to uninstall the HDCapture.
HDC-502E Video Capture Card 4.5 FAQ Q: The input source video format is 60Hz and the HDCapture software video format setting is also 60Hz. But the video and sound are not synchronized. A: Please change the video format of HDCapture software to 59.94P to capture the video. Q: Capture card, driver, application and input source are all ready, but the recorded video is not displayed or displayed incorrectly. A: A correct video codec is needed to display the H.264 video image. For example, ffdshow codec.
HDC-502E Video Capture Card Appendix A A Hazardous Materials Disclosure Page 30
HDC-502E Video Capture Card A.1 Hazardous Material Disclosure Table for IPB Products Certified as RoHS Compliant Under 2002/95/EC Without Mercury The details provided in this appendix are to ensure that the product is compliant with the Peoples Republic of China (China) RoHS standards. The table below acknowledges the presences of small quantities of certain materials in the product, and is applicable to China RoHS only.
HDC-502E Video Capture Card Part Name Toxic or Hazardous Substances and Elements Lead Mercury Cadmium Hexavalent Polybrominated Polybrominated (Pb) (Hg) (Cd) Chromium Biphenyls Diphenyl Ethers (CR(VI)) (PBB) (PBDE) Housing X O O O O X Display X O O O O X Printed Circuit X O O O O X X O O O O O X O O O O X Fan Assembly X O O O O X Power Supply X O O O O X O O O O O O Board Metal Fasteners Cable Assembly Assemblies Battery O: This toxic o
HDC-502E Video Capture Card 此附件旨在确保本产品符合中国 RoHS 标准。以下表格标示此产品中某有毒物质的含量符 合中国 RoHS 标准规定的限量要求。 本产品上会附有”环境友好使用期限”的标签，此期限是估算这些物质”不会有泄漏或突变”的 年限。本产品可能包含有较短的环境友好使用期限的可替换元件，像是电池或灯管，这些 元件将会单独标示出来。 部件名称 有毒有害物质或元素 铅 汞 镉 六价铬 多溴联苯 多溴二苯醚 (Pb) (Hg) (Cd) (CR(VI)) (PBB) (PBDE) 壳体 X O O O O X 显示 X O O O O X 印刷电路板 X O O O O X 金属螺帽 X O O O O O 电缆组装 X O O O O X 风扇组装 X O O O O X 电力供应组装 X O O O O X 电池 O O O O O O O: 表示该有毒有害物质在该部件所有物质材料中的含量均在SJ/T11363-2006 标准规定的限量要
