User Manual

HYPER-KBN
Page 58
5.3.6.1 Serial Port 1 Configuration
Use the Serial Port 1 Configuration menu (BIOS Menu 13) to configure the serial port 1.
Aptio Setup Utility – Copyright (C) 2012 American Megatrends, Inc.
Advanced
F81216 Serial Port 1 Configuration
Serial Port [Enabled]
Device Settings IO=3F8h; IRQ=4
Change Settings [Auto]
Enable or Disable Serial
Port (COM)
---------------------
 : Select Screen
↑ ↓: Select Item
Enter Select
F1 General Help
F2 Previous Values
F3 Optimized
Defaults
F4 Save
ESC Exit
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
BIOS Menu 9: Serial Port 1 Configuration Menu
 Serial Port [Enabled]
Use the Serial Port option to enable or disable the serial port.

Disabled
Disable the serial port

Enabled DEFAULT
Enable the serial port
 Change Settings [Au to]
Use the Change Settings option to change the serial port IO port address and interrupt
address.

Auto DEFAULT
The serial port IO port address and interrupt
address are automatically detected.

IO=3F8h; IRQ=4
Serial Port I/O port address is 3F8h and the
interrupt address is IRQ4

IO=3F8h; IRQ=3,
4,5,6,7,10,11,12
Serial Port I/O port address is 3F8h and the
interrupt address is IRQ3,4,5,6,7,10,11,12