Owner manual
Table Of Contents
- 1 Introduction
- 2 Packing List
- 3 Connectors
- 4 Installation
- 5 BIOS
- 5.1 Introduction
- 5.2 Main
- 5.3 Advanced
- 5.4 Chipset
- 5.5 Boot
- 5.6 Security
- 5.7 Save & Exit
- 6 Software Drivers
- A BIOS Options
- B One Key Recovery
- C Terminology
- D Watchdog Timer
- E Hazardous Materials Disclosure
ICE-CV-D25501/N26001 COM Express Module
Page 23
3.2.3 SO-DIMM Connector
CN Label: DIMM1
CN Type:
204-pin DDR3 SO-DIMM connector
CN Location:
See
Figure 3-4
The SO-DIMM connector is for installing memory on the system.
Figure 3-4: SO-DIMM Connector Location
3.2.4 SPI Connector
CN Label: SPI1
CN Type:
6-pin connector
CN Location:
See Figure 3-5
CN Pinouts:
See Table 3-4
The SPI connector is for flashing new BIOS onto the SPI BIOS chip.