Owner manual
Table Of Contents
- 1 Introduction
- 2 Packing List
- 3 Connectors
- 4 Installation
- 5 BIOS
- 5.1 Introduction
- 5.2 Main
- 5.3 Advanced
- 5.4 Chipset
- 5.5 Boot
- 5.6 Security
- 5.7 Save & Exit
- 6 Software Drivers
- A BIOS Options
- B One Key Recovery
- C Terminology
- D Watchdog Timer
- E Hazardous Materials Disclosure
ICE-CV-D25501/N26001 COM Express Module
Page 30
Figure 4-2: Connect the COM Express Connectors
Step 2: Place the supplied heat sink on the heatspreader plate, aligning the four
retention screw holes (
Figure 4-3). Ensure to apply thermal paste to the heat
sink or heatspreader plate for optimum heat dissipation.
Figure 4-3: Attach the Heat Sink to the Heatspreader Plate