Owner manual
Table Of Contents
- 1 Introduction
- 2 Packing List
- 3 Connectors
- 4 Installation
- 5 BIOS
- 5.1 Introduction
- 5.2 Main
- 5.3 Advanced
- 5.4 Chipset
- 5.5 Boot
- 5.6 Security
- 5.7 Save & Exit
- 6 Software Drivers
- A BIOS Options
- B One Key Recovery
- C Terminology
- D Watchdog Timer
- E Hazardous Materials Disclosure
ICE-CV-D25501/N26001 COM Express Module
Page 50
5.3.9 H/W Monitor
The H/W Monitor menu (BIOS Menu 12) contains the fan configuration submenus and
displays operating temperature, fan speeds and system voltages.
Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc.
Advanced
PC Health Status
Smart Fan Function [Enabled]
> Smart Fan Mode Configuration
SYSTIN temperature : +38 C
AUXTIN temperature : +34 C
System Fan1 : N/A
System Fan2 : N/A
Enable or Disable Smart
Fan
---------------------
: Select Screen
↑ ↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
BIOS Menu 12: H/W Monitor
PC Health Status
The following system parameters and values are shown. The system parameters that are
monitored are:
System temperatures
System fan speeds
Smart Fan Function [Enabled]
Use Smart Fan Function option to enable or disable the smart fan function.
Disabled
Disabled the smart fan function
Enabled DEFAULT
Enabled the smart fan function