Owner manual
Table Of Contents
- 1 Introduction
- 2 Packing List
- 3 Connectors
- 4 Installation
- 5 BIOS
- 5.1 Introduction
- 5.2 Main
- 5.3 Advanced
- 5.4 Chipset
- 5.5 Boot
- 5.6 Security
- 5.7 Save & Exit
- 6 Software Drivers
- A BIOS Options
- B One Key Recovery
- C Terminology
- D Watchdog Timer
- E Hazardous Materials Disclosure
ICE-CV-D25501/N26001 COM Express Module
Page 58
IGFX - Boot Type [VBIOS Default]
Use the IGFX - Boot Type option to select the display device used by the system when it
boots. Configuration options are listed below.
VBIOS Default
DEFAULT
CRT
Display Port 1
Display Port 2
LVDS1
CRT + LVDS1
LVDS1 Panel Type [800x600 18-Bit]
Use the LVDS1 Panel Type option to select the type of flat panel connected to the LVDS
connector. Configuration options are listed below.
640x480 18-Bit
800x600 18-Bit D
EFAULT
1024x768 18-Bit
1280x1024 24-Bit
1366x768 18-Bit
1024x600 18-Bit
1280x800 18-Bit
1024x768 24-Bit
1366x768 24-Bit
Backlight Control [Inverted]
Use the Backlight Control option to select the backlight control mode.
Normal
Brightest at high voltage level
Inverted DEFAULT
Brightest at low voltage level
Fixed Graphics Memory Size [128MB]
Use the Fixed Graphics Memory Size option to specify the maximum amount of memory
that can be allocated as graphics memory. Configuration options are listed below.