Manual

ICE-CV-D25502/N26002 COM Express Module
Page 53
5.3.9.3 Parallel Port Configuration
Use the Parallel Port Configuration menu (BIOS Menu 15) to configure the serial port n.
Aptio Setup Utility – Copyright (C) 2010 American Megatrends, Inc.
Advanced
Parallel Port Configuration
Parallel Port [Enabled]
Device Settings IO=378h; IRQ=5
Change Settings [Auto]
Device Mode [Printer Mode]
Enable or Disable
Parallel Port (LPT/LPTE)
---------------------
 : Select Screen
↑ ↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
BIOS Menu 15: Parallel Port Configuration Menu
 Parallel Port [Enabled]
Use the Parallel Port option to enable or disable the parallel port.

Disabled
Disable the parallel port

Enabled DEFAULT
Enable the parallel port
 Change Settings [Auto]
Use the Change Settings option to change the parallel port IO port address and interrupt
address.

Auto DEFAULT
The parallel port IO port address and interrupt
address are automatically detected.

IO=378h;
IRQ=5
Parallel Port I/O port address is 378h and the
interrupt address is IRQ5