User Manual

Page 121
ICE Module
6.7.2 Using DOS Command
To update BIOS in the DOS environment, prepare a USB flash drive that contains boot
files and BIOS updating files shown in
Figure 6-19 and follow the steps below to
update BIOS.
Figure 6-19: USB Flash Drive and BIOS Updating Files
Step 1: Connect the USB flash drive to the system. Boot-up the system into DOS.
Input commands to get into the directory of the BIOS updating files
(ex. cd (folder name)). See
Figure 6-20.
Figure 6-20: BIOS Updating File Directory