Instruction Manual

ICE-PV-N4551_D5251 COM Express Type 2 Module

Page 35

4.4.1 LVDS Panel Resolution

Jumper Label: SW1

Jumper Type:

4-in-1 switch

Jumper Settings:

See Table 4-2

Jumper Loc

ation:

See Figure 4–2

This

switch sets the resolution of the panel attached to the LVDS output. Settings are

shown in Table 4-2.

1-8 2-7 3-6 4-5 DESCRIPTION VBIOS ID

OPEN OPEN OPEN OPEN

640 x 480 (18-bit) 1

CLOSED OPEN OPEN OPEN

800 x 480 (18-bit) 2

OPEN CLOSED OPEN OPEN

800 x 600 (18-bit) 3

CLOSED CLOSED OPEN OPEN

1024 x 768 (18-bit) 5

OPEN OPEN CLOSED

OPEN

1280 x 1024 (18-bit)

CLOSED OPEN CLOSED

OPEN

1366 x 768 (18-bit) 10

OPEN CLOSED CLOSED

OPEN

1280 x 800 (18-bit) 7

CLOSED CLOSED CLOSED

OPEN

1280 x 600 (18-bit) 15

Table 4-2: LVDS Panel Resolution

4.5 Mounting the ICE-PV-N4551/D5251

WARNING!

Never run the embedded module without an appropriate heat sink.