User's Manual

ManualsBrandsIEI Integration ManualsElectronicsPanel PC

IKARPC-07A-A9 In-vehicle Panel PC

Page I

User Manual

MODEL:

IKARPC-07A-A9

7” Android-Based Panel PC with Touchscreen

Freescale™ i.MX6 ARM Cortex™-A9 CPU, OBD-II, CAN, USB,

Audio, RS-232, RoHS Compliant, IP 54 Front Panel

Rev. 1.01 – October 28, 2015

Summary of content (93 pages)

PAGE 1
IKARPC-07A-A9 In-vehicle Panel PC MODEL: IKARPC-07A-A9 7” Android-Based Panel PC with Touchscreen Freescale™ i.MX6 ARM Cortex™-A9 CPU, OBD-II, CAN, USB, Audio, RS-232, RoHS Compliant, IP 54 Front Panel User Manual Page I Rev. 1.
PAGE 2
IKARPC-07A-A9 In-vehicle Panel PC Revision Date Version Changes October 28, 2015 1.01 Updated product photos June 12, 2015 1.
PAGE 3
IKARPC-07A-A9 In-vehicle Panel PC Copyright COPYRIGHT NOTICE The information in this document is subject to change without prior notice in order to improve reliability, design and function and does not represent a commitment on the part of the manufacturer. In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or documentation, even if advised of the possibility of such damages.
PAGE 4
IKARPC-07A-A9 In-vehicle Panel PC Manual Conventions WARNING Warnings appear where overlooked details may cause damage to the equipment or result in personal injury. Warnings should be taken seriously. CAUTION Cautionary messages should be heeded to help reduce the chance of losing data or damaging the product. NOTE These messages inform the reader of essential but non-critical information.
PAGE 5
IKARPC-07A-A9 In-vehicle Panel PC Table of Contents 1 INTRODUCTION.......................................................................................................... 1 1.1 OVERVIEW.................................................................................................................. 2 1.2 FEATURES ................................................................................................................... 2 1.3 FRONT PANEL ............................................................
PAGE 6
IKARPC-07A-A9 In-vehicle Panel PC 4.1 POWER-ON/OFF PROCEDURE ................................................................................... 26 4.1.1 Installation Checklist ....................................................................................... 26 4.1.2 Power-on Procedure ........................................................................................ 26 4.1.3 Power-off Procedure ........................................................................................ 27 4.
PAGE 7
IKARPC-07A-A9 In-vehicle Panel PC 5.2.2 LED Connector (LED_BD2)............................................................................ 54 5.2.3 LVDS Connector (CN2) ................................................................................... 55 5.2.4 Microphone Connector (MIC1) ....................................................................... 55 5.2.5 Programming Connector (MCU1) ................................................................... 56 5.2.6 Programming Connector (JP2) ......
PAGE 8
IKARPC-07A-A9 In-vehicle Panel PC List of Figures Figure 1-1: IKARPC-07A-A9 Panel PC ..........................................................................................2 Figure 1-2: Front View ....................................................................................................................3 Figure 1-3: LED Indicators .............................................................................................................4 Figure 1-4: Rear View .................................
PAGE 9
IKARPC-07A-A9 In-vehicle Panel PC Figure 4-12: Wireless and Networks Settings ...........................................................................34 Figure 4-13: More Settings Menu ................................................................................................35 Figure 4-14: Sound Menu .............................................................................................................36 Figure 4-15: Display Menu ...............................................................
PAGE 10
IKARPC-07A-A9 In-vehicle Panel PC List of Tables Table 1-1: Technical Specifications ..............................................................................................9 Table 2-1: Packing List .................................................................................................................13 Table 3-1: IO 1 Connector Pinouts ..............................................................................................20 Table 3-2: IO 2 Connector Pinouts .........................
PAGE 11
IKARPC-07A-A9 In-vehicle Panel PC Chapter 1 1 Introduction Page 1
PAGE 12
IKARPC-07A-A9 In-vehicle Panel PC 1.1 Overview Figure 1-1: IKARPC-07A-A9 Panel PC The IKARPC-07A-A9 is a 7” Android-based panel PC At the heart of the system is the Freescale™ i.MX6 ARM Cortex™-A9 processor, offering low power in a powerful package. The system also offers a multimedia experience with a built-in camera, microphone and speaker. Other peripherals include one USB port, one video input connector, and two I/O connectors which support RS-232, OBD-II, CAN 2.
PAGE 13
IKARPC-07A-A9 In-vehicle Panel PC  GPS antenna connector  5-megapixel front-facing camera, speaker, microphone  IP 54 compliant front panel  RoHS compliance 1.3 Front Panel The front of the IKARPC-07A-A9 is a flat panel screen with a plastic frame. The components on the front panel are listed below:  5-megapixel camera  Ambient light sensor  LED indicators (see Section 1.3.
PAGE 14
IKARPC-07A-A9 In-vehicle Panel PC 1.3.1 LED Indicators The LED indicators on the front panel show the status of power, Bluetooth, Wi-Fi and GPRS/HSUPA connection. Figure 1-3: LED Indicators 1.4 Rear Panel The rear panel has VESA mounting screw holes and an access panel for SD card and SIM card. The following I/O connectors can also be found on the rear panel.
PAGE 15
IKARPC-07A-A9 In-vehicle Panel PC  1 x 3.
PAGE 16
IKARPC-07A-A9 In-vehicle Panel PC 1.5 Right Side Panel The right side panel has one USB 2.0 host port. Figure 1-5: Right Side Panel 1.6 Top Panel The top panel has a power button. Press the power button for 4~6 seconds to power on the system.
PAGE 17
IKARPC-07A-A9 In-vehicle Panel PC 1.7 Bottom Panel The bottom panel has a 2 W speaker. Figure 1-7: Bottom Panel 1.8 System Specifications The technical specifications for the IKARPC-07A-A9 systems are listed in Table 1-1. System CPU Freescale™ i.MX6 ARM Cortex™-A9 processor Memory On-board 1 GB SDRAM memory Boot Flash On-board 8 GB iNAND flash OS Android 4.2 Storage One SD card slot (SD 2.0 compatible, max.
PAGE 18
IKARPC-07A-A9 In-vehicle Panel PC Communication LAN 1 x 10/100 Mbps Wireless LAN 802.11a/b/g/n Bluetooth Bluetooth + HS WWAN Built-in u-blox LISA-U200-02S 3.75G UMTS/HSPA+ module supports: HSPA/UMTS-800/850/1900/2100 MHz Quad-band EDGE/GPRS/GSM-850/900/1800/1900MHz GPS Built-in u-blox NEO-M8N GPS module with external antenna RFID On-board RFID antenna 13.
PAGE 19
IKARPC-07A-A9 In-vehicle Panel PC 20-pin connector: 1 x 10/100 Mbps LAN 1 x CAN 2.
PAGE 20
IKARPC-07A-A9 In-vehicle Panel PC 1.9 Dimensions The dimensions are shown below.
PAGE 21
IKARPC-07A-A9 In-vehicle Panel PC Chapter 2 2 Unpacking Page 11
PAGE 22
IKARPC-07A-A9 In-vehicle Panel PC To unpack the panel PC, follow the steps below: WARNING! The front side LCD screen has a protective plastic cover stuck to the screen. Only remove the plastic cover after the system has been properly installed. This ensures the screen is protected during the installation process. Step 1: Use box cutters, a knife or a sharp pair of scissors that seals the top side of the external (second) box. Step 2: Open the external (second) box.
PAGE 23
IKARPC-07A-A9 In-vehicle Panel PC The IKARPC-07A-A9 is shipped with the following components: Quantity Item 1 IKARPC-07A-A9 1 ACC power cable Image panel PC (P/N: 32002-001900-100-RS) 1 GPS/GSM antenna (P/N: 32506-000100-100-RS) 1 User manual CD and driver CD Table 2-1: Packing List If any of these items are missing or damaged, contact the distributor or sales representative immediately.
PAGE 24
IKARPC-07A-A9 In-vehicle Panel PC Chapter 3 3 Installation Page 14
PAGE 25
IKARPC-07A-A9 In-vehicle Panel PC 3.1 Anti-static Precautions WARNING: Failure to take ESD precautions during the maintenance of the IKARPC-07A-A9 may result in permanent damage to the IKARPC-07A-A9 and severe injury to the user. Electrostatic discharge (ESD) can cause serious damage to electronic components, including the IKARPC-07A-A9. Dry climates are especially susceptible to ESD.
PAGE 26
IKARPC-07A-A9 In-vehicle Panel PC  Anti-static Discharge: If a user open the rear panel of the flat panel PC, to configure the jumpers or plug in added peripheral devices, ground themselves first and wear an anti-static wristband. 3.3 Installation and Configuration Steps The following installation steps must be followed.
PAGE 27
IKARPC-07A-A9 In-vehicle Panel PC Step 2: Locate the SD card slot. Insert the SD card into the slot to install it. To remove the SD card, push the SD card inward to release it. Figure 3-2: Install SD Card Step 3: Replace the SD card slot access panel. Step 0: 3.5 SIM Card Installation To install the SIM card, follow the instructions below. Step 1: Remove the retention screw and lift the SIM card slot access panel.
PAGE 28
IKARPC-07A-A9 In-vehicle Panel PC Step 2: Locate the SIM card slot. Insert the SIM card into the slot to install it. To remove the SIM card, slide the SIM card outward. Figure 3-4: Install SIM Card Step 3: Replace the SIM card slot access panel. Step 0: WARNING: The IKARPC-07A-A9 is not compatible with a micro-SIM (3FF) adapter or a nano-SIM (4FF) adapter. Please install a mini-SIM (2FF or Standard SIM) card for proper network connection.
PAGE 29
IKARPC-07A-A9 In-vehicle Panel PC 3.6 Mounting the System The IKARPC-07A-A9 is VESA (Video Electronics Standards Association) compliant and can be mounted on a mounting device with a 75 mm interface pad. The IKARPC-07A-A9 VESA mount retention screw holes are shown in Figure 3-5. Refer to the installation documentation that came with the mounting device to mount the IKARPC-07A-A9.
PAGE 30
IKARPC-07A-A9 In-vehicle Panel PC 3.7 External I/O Connectors This section provides an overview of the external I/O connectors of the IKARPC-07A-A9. 3.7.1 I/O Connector 1 (20-pin) The 20-pin I/O connector (IO 1) supports the following external peripheral devices:  1 x 10/100 Mbps LAN  1 x CAN 2.0 B  1 x OBD-II  1 x USB The pinouts for the IO 1 connector are listed in the figure and table below.
PAGE 31
IKARPC-07A-A9 In-vehicle Panel PC 3.7.2 I/O Connector 2 (24-pin) The 24-pin I/O connector (IO 2) supports the following external peripheral devices:  1 x Audio line-out (R+L)  1 x Audio line-in  1 x RS-232  2-bit digital input  2-bit digital output The pinouts for the IO 2 connector are listed in the figure and table below.
PAGE 32
IKARPC-07A-A9 In-vehicle Panel PC NOTE: In order to play sounds through the headset connected to the audio line-out connector, the “Switch to HeadPhone” option must be enabled. Please refer to Section 4.4.2 for detail information. 3.7.3 Video Input Connector The IKARPC-07A-A9 has one 8-pin video input connector on the rear panel. The pinouts for the video input connector are listed in the figure and table below. Figure 3-8: Video Input Connector PIN NO.
PAGE 33
IKARPC-07A-A9 In-vehicle Panel PC 3.7.4 Power Input Connection The IKARPC-07A-A9 has one 4-pin power input connector on the rear panel. The pinouts for the power input connector are listed in the figure and table below. Figure 3-9: Power Input Connector PIN NO. DESCRIPTION 1 GND 2 GND 3 POWER 4 ACC Table 3-4: Power Input Connector Pinouts The IKARPC-07A-A9 can use either ACC power or DC power from the power source.
PAGE 34
IKARPC-07A-A9 In-vehicle Panel PC 3.7.5 USB Connector The IKARPC-07A-A9 has one USB 2.0 port on the right side panel. The USB port has a screw on the side for securing the USB devices, such as barcode scanners and smart card readers. The following diagram shows the USB port and the screw on the side panel. Figure 3-11: USB Connector 3.8 System Maintenance If the components of the IKARPC-07A-A9 fail, they must be replaced. Please contact the system reseller or vendor to purchase the replacement parts.
PAGE 35
IKARPC-07A-A9 In-vehicle Panel PC Chapter 4 4 Using the IKARPC-07A-A9 Page 25
PAGE 36
IKARPC-07A-A9 In-vehicle Panel PC 4.1 Power-On/Off Procedure 4.1.1 Installation Checklist WARNING: Make sure a power supply with the correct input voltage is being fed into the system. Incorrect voltages applied to the system may cause damage to the internal electronic components and may also cause injury to the user. To power on the system please make sure of the following:  The rear cover is installed  All peripheral devices (antenna, serial communications devices etc.
PAGE 37
IKARPC-07A-A9 In-vehicle Panel PC Figure 4-1: Power Connector and Power Button Step 2: The system starts booting. When the main screen shows, press and slide the lock button on the screen to the unlock icon to unlock the system. 4.1.3 Power-off Procedure To power-off the IKARPC-07A-A9 please follow the steps below: Step 1: (1) Turn off the power source, or (2) Hold down the power button for 4~6 seconds to turn off the system. Step 2: The power-off confirmation window appears.
PAGE 38
IKARPC-07A-A9 In-vehicle Panel PC Figure 4-2: Power-off Confirmation Screen 4.2 Home Screen The IKARPC-07A-A9 has multiple home screens allowing users to customize the screen with widgets, apps, folders and shortcuts. The following sections describe the basic technique to manage the home screen. 4.2.1 Navigation Buttons The IKARPC-07A-A9 Android home screen has three navigation buttons to control the system. The navigation buttons are shown in Figure 4-3 and described in Table 4-1.
PAGE 39
IKARPC-07A-A9 In-vehicle Panel PC Buttons Description Back Tap to return to the previous screen. Home Tap to return to the home screen. Recent Apps Tap to display all the recently used applications. Table 4-1: Navigation Buttons 4.2.2 Multiple Home Screens Swipe left or right to switch. Long press an item on the home screen and when it vibrates drag the item to other screen. Figure 4-4: Multiple Home Screens 4.2.
PAGE 40
IKARPC-07A-A9 In-vehicle Panel PC Figure 4-5: Launcher Button Step 2: Long press an app icon or a widget (click the WIDGETS tab to access the widgets page). When it vibrates, drag app/widget to the home screen.
PAGE 41
IKARPC-07A-A9 In-vehicle Panel PC 4.2.4 Favorites Tray The Favorites tray at the side of each home screen allows users to keep the most important or frequently used shortcuts and folders. Long press an item on the home screen. When it vibrates, drag it to the favorites tray or move it from the favorites tray. The launcher button at the center of the favorites tray is fixed and can not be moved. Figure 4-7: Favorites Tray 4.2.5 Arranging Home Screen The items on the home screen can be moved and deleted.
PAGE 42
IKARPC-07A-A9 In-vehicle Panel PC Figure 4-8: Move and Trash Item on Home Screen 4.3 Status Bar The status bar on the top of the screen (Figure 4-9) displays the pending notifications and status, such as battery level or signal strength.
PAGE 43
IKARPC-07A-A9 In-vehicle Panel PC Swipe down from the right of the status bar to view the setting shortcut. Figure 4-10: Status Bar – Setting Shortcut Swipe down from the left of the status bar to view notification details.
PAGE 44
IKARPC-07A-A9 In-vehicle Panel PC 4.4 Settings The Settings menu allows configuration to the IKARPC-07A-A9, such as Wi-Fi, volume, screen brightness, etc. To enter the Settings menu, tap Settings on the launcher page. 4.4.1 WIRELESS & NETWORKS Figure 4-12: Wireless and Networks Settings In the WIRELESS & NETWORKS field, the user can turn on/off the Wi-Fi and Bluetooth functions, and configure the network settings.  Wi-Fi allows the user to turn on or turn off the Wi-Fi function.
PAGE 45
IKARPC-07A-A9 In-vehicle Panel PC  Data usage displays the data usage in a certain period of time.  Ethernet configuration configures the Ethernet settings. 4.4.1.1 More Settings Figure 4-13: More Settings Menu After tapping More… in the WIRELESS & NETWORKS field, the user can configure the following network settings.  Airplane mode turns on or turns off the airplane mode.  VPN sets up and manages Virtual Private Networks (VPNs).
PAGE 46
IKARPC-07A-A9 In-vehicle Panel PC  Android Beam allows the user to beam app content to another NFC-capable device when it is enabled. This item is available only when the NFC function is turned on.  Mobile networks configure Mobile network settings, including data enabled, data roaming, access point names, use only 2G networks, and network operators. 4.4.2 Sound Figure 4-14: Sound Menu Use the Sound menu to configure the following items.
PAGE 47
IKARPC-07A-A9 In-vehicle Panel PC  Switch to HeadPhone allowing the user to play sounds through the headset connected to the audio line-out connector of the IKARPC-07A-A9. 4.4.3 Display Figure 4-15: Display Menu Use the Display menu to configure the following items.  Brightness adjusts the screen brightness.  Wallpaper sets up the wallpaper.  Sleep sets up the time of inactivity after which the screen turns to sleep mode.  Daydream configures the screensaver settings.
PAGE 48
IKARPC-07A-A9 In-vehicle Panel PC 4.4.4 Storage The Storage menu displays the status of the internal storage and the installed SD card, and allows users to manage the data stored in them.
PAGE 49
IKARPC-07A-A9 In-vehicle Panel PC 4.4.5 Apps The Apps menu displays the applications installed in the device, and allows users to manage them. Figure 4-17: Apps Menu 4.4.6 Users The Users menu allows the user to configure the owner information.
PAGE 50
IKARPC-07A-A9 In-vehicle Panel PC 4.4.7 Location Access Figure 4-19: Location Access Menu Use the Location access menu to configure the following items.  Access to my location lets apps obtain the user’s location information.  GPS satellites allows apps to use the GPS in the device to pinpoint the user’s location. This item is available only when the Access to my location item is enabled.
PAGE 51
IKARPC-07A-A9 In-vehicle Panel PC 4.4.8 Security Figure 4-20: Security Menu Use the Security menu to configure the following items.  Screen lock sets up the way to unlock the screen.  Owner info configures the owner information to display on the lock screen.  Make passwords visible allows the device to show password when typing.  Device administrators displays or deactivates the device administrators.  Unknown sources allows installation of applications from unknown sources.
PAGE 52
IKARPC-07A-A9 In-vehicle Panel PC 4.4.9 Language & Input Figure 4-21: Language & Input Menu Use the Language & input menu to configure the following items.  Language sets up the language for IKARPC-07A-A9.  Spell checker allows the user to enable the spell checking function and configure its settings.  Personal dictionary configures the user dictionary.  KEYBOARD & INPUT METHODS allows the user to set up the onscreen keyboard.  Text-to-speech output configures the text-to-speech settings.
PAGE 53
IKARPC-07A-A9 In-vehicle Panel PC 4.4.10 Backup & Reset Figure 4-22: Backup & Reset Menu Use the Back & reset menu to configure the following items.  Factory data reset erases all data from the internal storage of the IKARPC-07A-A9.
PAGE 54
IKARPC-07A-A9 In-vehicle Panel PC 4.4.11 Add account Tap Add account to start setting up an e-mail or corporate account. Figure 4-23: Add Account Menu 4.4.
PAGE 55
IKARPC-07A-A9 In-vehicle Panel PC Use the Date & time menu to configure the following items.  Automatic date & time uses the network-provided time.  Automatic time zone uses the network-provided time zone  Select time zone sets up the time zone.  Use 24-hour format uses the 24-hour format.  Choose date format sets up the date format. 4.4.13 Accessibility Figure 4-25: Accessibility Menu Use the Accessibility menu to configure the following items.
PAGE 56
IKARPC-07A-A9 In-vehicle Panel PC  Speak passwords allows the system to speak passwords.  Text-to-speech output configures the text-to-speech settings.  Touch & hold delay configures the touch & hold delay settings.  Enhance web accessibility allows apps to install scripts from Google that make their web content more accessible. 4.4.14 About Tablet Figure 4-26: About Tablet Menu Use the About tablet menu to display the following items.
PAGE 57
IKARPC-07A-A9 In-vehicle Panel PC  Model number displays the model number.  Android version displays the Android version.  Baseband version displays the baseband version.  Kernel version displays the kernal version.  Build number displays the device build number. 4.5 File Management The IKARPC-07A-A9 provides a file management tool that allows users to manage files in the internal storage and external storage devices. Tap ES File Explorer on the application page to launch it.
PAGE 58
IKARPC-07A-A9 In-vehicle Panel PC The ES File Explorer application user interface appears (Figure 4-28). Tap the storage folder. Figure 4-28: ES File Explorer Screen The user can view all the possible storage devices, including  sdcard0: internal storage of the IKARPC-07A-A9  sdcard1: SD card connected to the IKARPC-07A-A9  usb1: USB storage device connected to the USB host connector on the side panel. Refer to Figure 1-5 for the connector location.
PAGE 59
IKARPC-07A-A9 In-vehicle Panel PC 4.6 Camera The IKARPC-07A-A9 equips with a 5-megapixel front-facing auto-focus camera, and also accepts a video device through the video input connector on the rear panel. To manage the built-in camera or the connected video device, tap Camera on the Launcher page. The user interface of the camera application appears. Figure 4-30 and Table 4-2 describe each button in detail.
PAGE 60
IKARPC-07A-A9 In-vehicle Panel PC 4.7 System Update If there is a newer version of OS or firmware available, please follow the steps below to update the system. Step 3: If choosing to update the OS or firmware from the SD card, save the update file to an SD card and insert the SD card to the IKARPC-07A-A9 (see Section 3.4 for the SD card installation instruction). The user can also update from OTA (over-the-air) via Wi-Fi connection. Step 4: Access the Launcher page and click Settings.
PAGE 61
IKARPC-07A-A9 In-vehicle Panel PC Chapter 5 5 Interface Connectors Page 51
PAGE 62
IKARPC-07A-A9 In-vehicle Panel PC 5.1 Peripheral Interface Connectors The motherboard of the IKARPC-07A-A9 comes with a number of peripheral interface connectors and configuration jumpers. The connector locations are shown in Figure 5-1 and Figure 5-2. The Pin 1 locations of the on-board connectors are also indicated in the diagrams below. The connector pinouts for these connectors are listed in the following sections.
PAGE 63
IKARPC-07A-A9 In-vehicle Panel PC 5.2 Internal Peripheral Connectors Internal peripheral connectors are found on the motherboard and are only accessible when the motherboard is outside of the chassis. The table below shows a list of the peripheral interface connectors on the IKARPC-07A-A9 motherboard. Pinouts of these connectors can be found in the following sections.
PAGE 64
IKARPC-07A-A9 In-vehicle Panel PC 5.2.1 Camera Connector (CAMERA1) PIN NO. DESCRIPTION PIN NO. DESCRIPTION 1 GND 13 NC 2 CIM_AF2V8 14 CIM_nRST 3 NC 15 NC 4 NC 16 NC 5 GND 17 NC 6 MIPI_D1_P 18 I2C_SDA1 7 MIPI_D1_N 19 I2C_SCL1 8 MIPI_CLK_P 20 CAMERA_PWD 9 MIPI_CLK_N 21 CAMERA_MCLK 10 MIPI_D0_P 22 CIM_IO_1V5 11 MIPI_D0_N 23 CIM_IO1V8 12 NC 24 CIM_A2V8 Table 5-2: Camera Connector (CAMERA1) Pinouts 5.2.2 LED Connector (LED_BD2) PIN NO.
PAGE 65
IKARPC-07A-A9 In-vehicle Panel PC 5.2.3 LVDS Connector (CN2) PIN NO. DESCRIPTION PIN NO.
PAGE 66
IKARPC-07A-A9 In-vehicle Panel PC 5.2.5 Programming Connector (MCU1) PIN NO. DESCRIPTION 1 MCLR 2 MCU_PWR 3 GND 4 ICSPCLK2 5 ICSPDAT2 Table 5-6: Programming Connector (MCU1) Pinouts 5.2.6 Programming Connector (JP2) PIN NO. DESCRIPTION 1 MCLR#-1 2 5V_OBD 3 GND 4 2580_CLK 5 2580_DAT Table 5-7: Programming Connector (JP2) Pinouts 5.2.7 Speaker Connector (SPK1) PIN NO. DESCRIPTION 1 SPK_OUT_P 2 SPK_OUT_N Table 5-8: Speaker Connector (SPK1) Pinouts 5.2.
PAGE 67
IKARPC-07A-A9 In-vehicle Panel PC 5 CTP_RST# 6 I2C_SCL3 7 I2C_SDA3 8 CTP_INTR Table 5-9: Touch Panel Connector (CN10) Pinouts Page 57
PAGE 68
IKARPC-07A-A9 In-vehicle Panel PC Appendix A A Regulatory Compliance Page 58
PAGE 69
IKARPC-07A-A9 In-vehicle Panel PC DECLARATION OF CONFORMITY This equipment is in conformity with the following EU directives:  EMC Directive 2004/108/EC  Low-Voltage Directive 2006/95/EC  RoHS II Directive 2011/65/EU  Ecodesign Directive 2009/125/EC If the user modifies and/or install other devices in the equipment, the CE conformity declaration may no longer apply. If this equipment has telecommunications functionality, it also complies with the requirements of the R&TTE Directive 1999/5/EC.
PAGE 70
IKARPC-07A-A9 In-vehicle Panel PC Español [Spanish] IEI Integration Corp declara que el equipo cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE. Ελληνική [Greek] IEI Integration Corp ΔΗΛΩΝΕΙ ΟΣΙ ΕΞΟΠΛΙ΢ΜΟ΢ ΢ΤΜΜΟΡΦΩΝΕΣΑΙ ΠΡΟ΢ ΣΙ΢ ΟΤ΢ΙΩΔΕΙ΢ ΑΠΑΙΣΗ΢ΕΙ΢ ΚΑΙ ΣΙ΢ ΛΟΙΠΕ΢ ΢ΥΕΣΙΚΕ΢ ΔΙΑΣΑΞΕΙ΢ ΣΗ΢ ΟΔΗΓΙΑ΢ 1999/5/ΕΚ.
PAGE 71
IKARPC-07A-A9 In-vehicle Panel PC Româna [Romanian] IEI Integration Corp declară că acest echipament este in conformitate cu cerinţele esenţiale şi cu celelalte prevederi relevante ale Directivei 1999/5/CE. Slovensko [Slovenian] IEI Integration Corp izjavlja, da je ta opreme v skladu z bistvenimi zahtevami in ostalimi relevantnimi določili direktive 1999/5/ES. Slovensky [Slovak] IEI Integration Corp týmto vyhlasuje, že zariadenia spĺňa základné požiadavky a všetky príslušné ustanovenia Smernice 1999/5/ES.
PAGE 72
IKARPC-07A-A9 In-vehicle Panel PC FCC WARNING This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and(2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
PAGE 73
IKARPC-07A-A9 In-vehicle Panel PC Appendix B B Safety Precautions Page 63
PAGE 74
IKARPC-07A-A9 In-vehicle Panel PC WARNING: The precautions outlined in this chapter should be strictly followed. Failure to follow these precautions may result in permanent damage to the IKARPC-07A-A9. B.1 Safety Precautions Please follow the safety precautions outlined in the sections that follow: B.1.1 General Safety Precautions Please ensure the following safety precautions are adhered to at all times.  Follow the electrostatic precautions outlined below whenever the IKARPC-07A-A9 is opened.
PAGE 75
IKARPC-07A-A9 In-vehicle Panel PC B.1.2 Anti-static Precautions WARNING: Failure to take ESD precautions during the installation of the IKARPC-07A-A9 may result in permanent damage to the IKARPC-07A-A9 and severe injury to the user. Electrostatic discharge (ESD) can cause serious damage to electronic components, including the IKARPC-07A-A9. Dry climates are especially susceptible to ESD.
PAGE 76
IKARPC-07A-A9 In-vehicle Panel PC B.1.3 Product Disposal CAUTION: Risk of explosion if battery is replaced by an incorrect type. Only certified engineers should replace the on-board battery. Dispose of used batteries according to instructions and local regulations.  Outside the European Union - If you wish to dispose of used electrical and electronic products outside the European Union, please contact your local authority so as to comply with the correct disposal method.
PAGE 77
IKARPC-07A-A9 In-vehicle Panel PC  Except for the LCD panel, never spray or squirt liquids directly onto any other components. To clean the LCD panel, gently wipe it with a piece of soft dry cloth or a slightly moistened cloth.  The interior of the IKARPC-07A-A9 does not require cleaning. Keep fluids away from the IKARPC-07A-A9 interior.  Be cautious of all small removable components when vacuuming the IKARPC-07A-A9.  Turn the IKARPC-07A-A9 off before cleaning the IKARPC-07A-A9.
PAGE 78
IKARPC-07A-A9 In-vehicle Panel PC Appendix C C OBD-II Reader Command Page 68
PAGE 79
IKARPC-07A-A9 In-vehicle Panel PC C.1 Select a Chip Initial Mode: UpDate F/W or RUN F/W  AP sends query  F/W receives query 1 Enter Boot 0x3 Mode 1 Enter RUN 0x3 Mode 0 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 C.2 Boot Mode  Launch AP: P1618QP (Pic18F Bootloader )  Baud Rate:115200 C.
PAGE 80
IKARPC-07A-A9 In-vehicle Panel PC F/W returns (after receiving query) Select a 1 2 3 4 5 6 7 8 $ M 0 0x0 Ver Ver 0x0 0x0 0 (1) (2) A D 0x1 0x0 0 6 0x0 Ver Ver 0x0 0x0 0 (1) (2) A D 0x1 0x0 0 6 0x0 Ver Ver 0x0 0x0 0 (1) (2) A D 0x1 0x0 0 6 mode to send Tele mode $ M 1 response CAN S $ M 2 mode response Enter Tele $ M T mode to 0x0 0x0 A D 0x0 0x0 A D respond Enter CAN $ S mode to respond Page 70 M C 9 10 11 12 13 14 15
PAGE 81
IKARPC-07A-A9 In-vehicle Panel PC C.4 Into CAN_Standard V2.2.
PAGE 82
IKARPC-07A-A9 In-vehicle Panel PC complete Menu setup $ C 4 0x0A complete Read query 0x0 D $ C 5 setup xxx TxID Bau E d RTR ID(1) ID(2) ID(3) ID(4) D1 D2 D3 D4 D5 D6 D7 D8 0x0A 0x0 D B0 B1 DLC Read menu $ C 7 setup M1I M1I M1I M1I M1F M1F M1F M1F M1F M1F M1F M1F M2I M2I M2I M2I D(1) D(2) D(3) D(4) 1ID( 1ID( 1ID( 1ID( 2ID( 2ID( 2ID( 2ID( D(1) D(2) D(3) D(4) 1) 2) 3) 4) 1) 2) 3) 4) 0x0A 0x0 M2F M2F M2F M2F M2F M2F M2F M2F M3F
PAGE 83
IKARPC-07A-A9 In-vehicle Panel PC C.5 Into Telematics  F/W:Telematics  AP: Telematics V1.
PAGE 84
IKARPC-07A-A9 In-vehicle Panel PC Reserved H J1939 input I PSPF FMS input J PSPF Version Y P P P P 0x0 -1 -2 -1 -2 D P P P P 0x0 -1 -2 -1 -2 D 0x0 D  F/W returns (after receiving query) 1 No device is scanned Devices Scanned Page 74 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
PAGE 85
IKARPC-07A-A9 In-vehicle Panel PC OBD packet format (ASCII code) OBD packet has five different format, they are: 1. CAN 11bits 250 2. CAN 29bits 250 3. CAN 11bits 500 4. CAN 29bits 500 5.
PAGE 86
IKARPC-07A-A9 In-vehicle Panel PC Byte 4 define as A. (same with the PID code table on Wikipedia) Byte 5 define as B. (same with the PID code table on Wikipedia) Byte 6 define as C. (same with the PID code table on Wikipedia) Byte 7 define as D.
PAGE 87
IKARPC-07A-A9 In-vehicle Panel PC Appendix D D Watchdog Timer Page 77
PAGE 88
IKARPC-07A-A9 In-vehicle Panel PC NOTE: The following discussion applies to DOS. Contact IEI support or visit the IEI website for drivers for other operating systems. The Watchdog Timer is a hardware-based timer that attempts to restart the system when it stops working. The system may stop working because of external EMI or software bugs. The Watchdog Timer ensures that standalone systems like ATMs will automatically attempt to restart in the case of system problems.
PAGE 89
IKARPC-07A-A9 In-vehicle Panel PC NOTE: The Watchdog Timer is activated through software. The software application that activates the Watchdog Timer must also deactivate it when closed. If the Watchdog Timer is not deactivated, the system will automatically restart after the Timer has finished its countdown.
PAGE 90
IKARPC-07A-A9 In-vehicle Panel PC Appendix E E Hazardous Materials Disclosure Page 80
PAGE 91
IKARPC-07A-A9 In-vehicle Panel PC E.1 Hazardous Materials Disclosure Table for IPB Products Certified as RoHS Compliant Under 2002/95/EC Without Mercury The details provided in this appendix are to ensure that the product is compliant with the Peoples Republic of China (China) RoHS standards. The table below acknowledges the presences of small quantities of certain materials in the product, and is applicable to China RoHS only.
PAGE 92
IKARPC-07A-A9 In-vehicle Panel PC Part Name Toxic or Hazardous Substances and Elements Lead Mercury Cadmium Hexavalent Polybrominated Polybrominated (Pb) (Hg) (Cd) Chromium Biphenyls Diphenyl (CR(VI)) (PBB) Ethers (PBDE) Housing O O O O O O Display O O O O O O Printed Circuit O O O O O O O O O O O O O O O O O O Fan Assembly O O O O O O Power Supply O O O O O O O O O O O O Board Metal Fasteners Cable Assembly Assemblies Battery O: This to
PAGE 93
IKARPC-07A-A9 In-vehicle Panel PC 此附件旨在确保本产品符合中国 RoHS 标准。以下表格标示此产品中某有毒物质的含量符合中国 RoHS 标准规定的限量要求。本产品上会附有”环境友好使用期限”的标签，此期限是估算这些物质”不会有泄漏或突变”的年限。本产品可能包含有较短的环境友好使用期限的可替换元件，像是电池或灯管，这些元件将会单独标示出来。部件名称有毒有害物质或元素铅汞镉六价铬多溴联苯多溴二苯 (Pb) (Hg) (Cd) (CR(VI)) (PBB) 醚 (PBDE) 壳体 O O O O O O 显示 O O O O O O 印刷电路板 O O O O O O 金属螺帽 O O O O O O 电缆组装 O O O O O O 风扇组装 O O O O O O 电力供应组装 O O O O O O 电池 O O O O O O O: 表示该有毒有害物质在该部件所有物质材料中的含量均在 SJ/T11363-2006