User guide

IMB-G41A Micro-ATX Motherboard
Page 95

IRQ5
IRQ5 is assigned as the parallel port interrupt address

IRQ7 DEFAULT
IRQ7 is assigned as the parallel port interrupt address
5.3.4 Hardware Health Configuration
The Hardware Health Configuration menu (BIOS Menu 7) shows the operating
temperature, fan speeds and system voltages.
BIOS SETUP UTILITY
Main Advanced PCIPNP Boot Security Chipset Exit
Hardware Health Event Monitoring
⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯
CPU_FAN Mode Setting [Automatic Mode]
CPU Temp. Limit of OFF [035]
CPU Temp. Limit of Start [055]
CPU_FAN1 Start PWM [050]
Slope PWM 1 [2 PWM]
CPU Temperature :43ºC/109ºF
System Temperature :33ºC/91ºF
CPU Fan Speed :4821 RPM
SYS Fan Speed :4821 RPM
CPU Core :1.200 V
1.8V :1.824 V
5V :4.960 V
12V :11.856 V
 Select Screen
↑ ↓ Select Item
Enter Go to SubScreen
F1 General Help
F10 Save and Exit
ESC Exit
v02.61 ©Copyright 1985-2006, American Megatrends, Inc.
BIOS Menu 7: Hardware Health Configuration
 Mode Setting [Full On Mode]
Use the Mode Setting option to configure the second fan.

Full On Mode DEFAULT
Fan is on all the time

Automatic mode
The fan adjusts its speed using these settings:
Temp. Limit of OFF
Temp. Limit of Start
Fan Start PWM
Slope PWM 1