User guide

IMB-G41A Micro-ATX Motherboard
Page 60
The COM Pin 9 Setting jumper configures pin 9 on COM 7~10 as either a +5 V or +12 V
power source. The COM 1 Pin 9 Setting jumper selection options are shown in
Table 4-5.
Setting Description
1-2 COM RI Pin use +5 V
2-3 COM RI Pin use +12 V
Table 4-5: COM 1 Pin 9 Setting Jumper Settings
Figure 4-11: COM 1 Pin 9 Setting Jumper Location
4.4 Internal Peripheral Device Connections
This section outlines the installation of peripheral devices to the onboard connectors.
4.4.1 SATA Drive Connection
The IMB-G41A is shipped with two SATA drive cables and one SATA drive power cable.
To connect the SATA drives to the connectors, please follow the steps below.