Manual

ManualsBrandsIEI Integration ManualsHardwareIMB-H610A

IMB-H610 Micro-ATX Motherboard

Page i

IEI Technology Corp.

User Manual

Mic ro ATX Motherboard s upports LGA1155 Intel® Core™

i7/i5/i3/Pentium®/Celeron® CPU per In te l® H61, DDR3, VGA/DVI-D,

dual Realtek PCIe GbE, USB 2.0, COM, S ATA 3Gb/s ,

HD Audio and RoHS

MODEL:

IMB-H610

Re v. 1.01 –March 31, 2012

Summary of content (192 pages)

PAGE 1
IMB-H610 Mic ro -ATX Mo th e rb o a rd IEI Te c h n o lo g y Co rp . MODEL: IMB-H610 Mic ro ATX Mo th e rb o a rd s u p p o rts LGA1155 In te l® Co re ™ i7/i5/i3/P e n tiu m ®/Ce le ro n ® CP U p e r In te l® H61, DDR3, VGA/DVI-D, d u a l Re a lte k P CIe Gb E, US B 2.0, COM, S ATA 3Gb /s , HD Au d io a n d Ro HS Us e r Ma n u a l Page i Re v. 1.
PAGE 2
IMB-H610 Mic ro -ATX Mo th e rb o a rd Re vis io n Date Version Changes March 31, 2012 1.01 Update Section 2.4: Optional Items October 14, 2011 1.
PAGE 3
IMB-H610 Mic ro -ATX Mo th e rb o a rd Co p yrig h t COP YRIGHT NOTICE The information in this document is subject to change without prior notice in order to improve reliability, design and function and does not represent a commitment on the part of the manufacturer. In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or documentation, even if advised of the possibility of such damages.
PAGE 4
IMB-H610 Mic ro -ATX Mo th e rb o a rd Ta b le o f Co n te n ts 1 INTRODUCTION.......................................................................................................... 1 1.1 INTRODUCTION........................................................................................................... 2 1.2 MODEL VARIATIONS ................................................................................................... 2 1.3 BENEFITS ..............................................................
PAGE 5
IMB-H610 Mic ro -ATX Mo th e rb o a rd 3.2.10 I2C Connector ................................................................................................ 26 3.2.11 PCIe Power Connector .................................................................................. 27 3.2.12 PCIe x16 Slot ................................................................................................. 28 3.2.13 PCIe x1 Slots ...............................................................................................
PAGE 6
IMB-H610 Mic ro -ATX Mo th e rb o a rd 4.6.3 LAN Connection ............................................................................................... 62 4.6.4 PS/2 Keyboard and Mouse Connection ........................................................... 63 4.6.5 Serial Device Connection ................................................................................ 64 4.6.6 USB Connection ............................................................................................... 65 4.6.
PAGE 7
IMB-H610 Mic ro -ATX Mo th e rb o a rd 5.4.1 Northbridge Configuration ............................................................................ 103 5.4.2 Southbridge Configuration ............................................................................ 105 5.4.3 Integrated Graphics ....................................................................................... 109 5.4.4 ME Subsystem ................................................................................................. 111 5.
PAGE 8
IMB-H610 Mic ro -ATX Mo th e rb o a rd B.5.2 System Memory Requirement ........................................................................ 161 C TERMINOLOGY ..................................................................................................... 162 D DIGITAL I/O INTERFACE ..................................................................................... 166 D.1 INTRODUCTION ...................................................................................................... 167 D.
PAGE 9
IMB-H610 Mic ro -ATX Mo th e rb o a rd Lis t o f Fig u re s Figure 1-1: IMB-H610 ......................................................................................................................2 Figure 1-2: Connectors ..................................................................................................................4 Figure 1-3: IMB-H610 Dimensions (mm) ......................................................................................5 Figure 1-4: Data Flow Diagram ................
PAGE 10
IMB-H610 Mic ro -ATX Mo th e rb o a rd Figure 3-27: VGA Connector .......................................................................................................44 Figure 4-1: Disengage the CPU Socket Load Lever ..................................................................50 Figure 4-2: Remove Protective Cover.........................................................................................50 Figure 4-3: Insert the Socket LGA1155 CPU ......................................................
PAGE 11
IMB-H610 Mic ro -ATX Mo th e rb o a rd Figure 6-15: LAN Driver Setup Status Screen .........................................................................127 Figure 6-16: LAN Driver Installation Complete ........................................................................127 Figure 6-17: Audio Driver – Extracting Files ............................................................................128 Figure 6-18: Audio Driver Welcome Screen ................................................................
PAGE 12
IMB-H610 Mic ro -ATX Mo th e rb o a rd Figure B-30: System Backup Complete Window ....................................................................156 Figure B-31: Restore Backup ....................................................................................................157 Figure B-32: Restore System Backup Complete Window ......................................................157 Figure B-33: Symantec Ghost Window ..................................................................................
PAGE 13
IMB-H610 Mic ro -ATX Mo th e rb o a rd Lis t o f Ta b le s Table 1-1: Model Variations ...........................................................................................................2 Table 1-2: IMB-H610 Specifications ..............................................................................................8 Table 2-1: Packing List .................................................................................................................12 Table 2-2: Optional Items ..................
PAGE 14
IMB-H610 Mic ro -ATX Mo th e rb o a rd Table 3-27: PS/2 Connector Pinouts ...........................................................................................42 Table 3-28: RS-232 Serial Port Connector Pinouts (COM1,COM2) ..........................................43 Table 3-29: VGA Connector Pinouts ...........................................................................................44 Table 3-30: DVI Connector Pinouts.............................................................................
PAGE 15
IMB-H610 Mic ro -ATX Mo th e rb o a rd BIOS Me n u s BIOS Menu 1: Main .......................................................................................................................71 BIOS Menu 2: Advanced ..............................................................................................................73 BIOS Menu 3: ACPI Configuration ..............................................................................................73 BIOS Menu 4: Trusted Computing .......................
PAGE 16
IMB-H610 Mic ro -ATX Mo th e rb o a rd Ch a p te r 1 1 In tro d u c tio n Page 1
PAGE 17
IMB-H610 Mic ro -ATX Mo th e rb o a rd 1.1 In tro d u c tio n Figure 1-1: IMB-H610 The IMB-H610 is a Micro-ATX motherboard. It accepts a LGA1155 Intel® Core™ i7/i5/i3 quad/dual, Pentium® dual, Celeron® dual/single core processor and supports two 240-pin 1333/1066 MHz dual-channel DDR3 DIMM modules up to 16 GB. The integrated Intel® H61 System Chipset supports two GbE LAN ports through dual Realtek RTL8111E PCIe GbE controllers (LAN1 with ASF 2.0 supported). The IMB-H610 includes a VGA and DVI-D port.
PAGE 18
IMB-H610 Mic ro -ATX Mo th e rb o a rd 1.3 Be n e fits Some of the IMB-H610 motherboard benefits include:  Powerful graphics with multiple monitors  Staying connected with both wired LAN connections  Speedy running of multiple programs and applications 1.
PAGE 19
IMB-H610 Mic ro -ATX Mo th e rb o a rd 1.5 Co n n e c to rs The connectors on the IMB-H610 are shown in the figure below.
PAGE 20
IMB-H610 Mic ro -ATX Mo th e rb o a rd 1.6 Dim e n s io n s The main dimensions of the IMB-H610 are shown in the diagram below.
PAGE 21
IMB-H610 Micro-ATX Motherboard 1. Data Flow Figure 1-4 shows the data flow between the system chipset, the CPU and other components installed on the motherboard.
PAGE 22
IMB-H610 Mic ro -ATX Mo th e rb o a rd 1.8 Te c h n ic a l Sp e c ific a tio n s IMB-H610 technical specifications are listed below. Specification/Model IMB-H610 Form Factor Micro-ATX CPU Supported LGA1155 socket supports Intel® Core™ i7/i5/i3 quad/dual, Pentium® dual, Celeron® dual/single core processor System Chipset Intel® H61 Graphic Engine Intel® HD Graphics 2000/3000 (based on CPU type) Support for DX 10.1 and OpenGL 3.
PAGE 23
IMB-H610 Mic ro -ATX Mo th e rb o a rd Specification/Model IMB-H610 TPM One 20-pin header Front Audio One 10-pin header Front Panel One 14-pin header SMBus One 4-pin wafer I2C One 4-pin wafer CPU One 4-pin CPU fan connector Two 3-pin system fan connectors Serial Ports Two external RS-232 via DB-9 male connectors Three RS-232 via internal 10-pin headers Four RS-232 via internal 40-pin box headers for IMB-H610B One RS-422/485 via internal 4-pin header USB ports Four external USB 2.
PAGE 24
IMB-H610 Mic ro -ATX Mo th e rb o a rd Ch a p te r 2 2 P a c kin g Lis t Page 9
PAGE 25
IMB-H610 Mic ro -ATX Mo th e rb o a rd 2.1 An ti-s ta tic P re c a u tio n s WARNING! Static electricity can destroy certain electronics. Make sure to follow the ESD precautions to prevent damage to the product, and injury to the user. Make sure to adhere to the following guidelines:  Wear an anti-static wristband: Wearing an anti-static wristband can prevent electrostatic discharge.  Self-grounding: Touch a grounded conductor every few minutes to discharge any excess static buildup.
PAGE 26
IMB-H610 Mic ro -ATX Mo th e rb o a rd 2.3 P a c kin g Lis t NOTE: If any of the components listed in the checklist below are missing, do not proceed with the installation. Contact the IEI reseller or vendor the IMB-H610 was purchased from or contact an IEI sales representative directly by sending an email to sales@iei.com.tw.
PAGE 27
IMB-H610 Mic ro -ATX Mo th e rb o a rd Qu a n tity Ite m a n d P a rt Nu m b e r 1 Quick Installation Guide Im a g e Table 2-1: Packing List 2.
PAGE 28
IMB-H610 Mic ro -ATX Mo th e rb o a rd Ite m a n d P a rt Nu m b e r Im a g e LGA1155/LGA1156 cooler kit, 1U Chassis compatible, 65W (P/N: CF-1156D-RS) Quad-port RS-232 cable without bracket for IMB-H610B (400/400/400/400MM) (P/N: 32205-001203-100-RS) RS232 cable (P/N:19800-000114-RS) Dual-port RS232 cable (P/N: 19800-003600-100-RS) 20-pin Infineon TPM module, SW management tool, firmware V3.
PAGE 29
IMB-H610 Mic ro -ATX Mo th e rb o a rd Ch a p te r 3 3 Co n n e c to rs P a g e 14
PAGE 30
IMB-H610 Micro-ATX Motherboard 3.1 Peripheral Interface Connectors This chapter details all the jumpers and connectors. 3.1.1 IMB-H610 Layout The figures below show all the connectors and jumpers.
PAGE 31
IMB-H610 Mic ro -ATX Mo th e rb o a rd 3.1.2 P e rip h e ra l In te rfa c e Co n n e c to rs The table below lists all the connectors on the board.
PAGE 32
IMB-H610 Mic ro -ATX Mo th e rb o a rd Co n n e c to r Typ e La b e l System fan connectors 3-pin wafer SYS_FAN1, SYS_FAN2 TPM connector 20-pin header TPM USB connectors 8-pin header USB45, USB67, USB89 Table 3-1: Peripheral Interface Connectors 3.1.3 Exte rn a l In te rfa c e P a n e l Co n n e c to rs The table below lists the connectors on the external I/O panel.
PAGE 33
IMB-H610 Mic ro -ATX Mo th e rb o a rd The ATX power connector connects to an ATX power supply. Figure 3-2: ATX Power Connector Location Pin Description Pin Description 1 +3.3 V 2 +3.3V 3 GND 4 +5 V 5 GND 6 +5 V 7 GND 8 PWROK 9 5VSB 10 +12 V 11 +12 V 12 +3.3V 13 +3.3 V 14 -12V 15 GND 16 PSON 17 GND 18 GND 19 GND 20 NC 21 +5 V 22 +5 V 23 +5 V 24 GND Table 3-3: ATX Power Connector Pinouts 3.2.
PAGE 34
IMB-H610 Mic ro -ATX Mo th e rb o a rd CN Typ e : Battery holder CN Lo c a tio n : See Figure 3-3 The battery connector is connected to the system battery. The battery provides power to the system clock to retain the time when power is turned off. Figure 3-3: Battery Connector Location 3.2.3 CP U Fa n Co n n e c to r CN La b e l: CP U_FAN CN Typ e : 4-pin wafer CN Lo c a tio n : See Figure 3-4 CN P in o u ts : See Table 3-4 The CPU fan connector attaches to a CPU cooling fan.
PAGE 35
IMB-H610 Mic ro -ATX Mo th e rb o a rd Figure 3-4: CPU Fan Connector Location PIN NO. DESCRIPTION 1 GND 2 +12V 3 FANIO1 4 PWM Table 3-4: CPU Fan Connector Pinouts 3.2.4 CP U P owe r Co n n e c to r CN La b e l: CP U12V1 CN Typ e : 4-pin Molex CN Lo c a tio n : See Figure 3-5 CN P in o u ts : See Table 3-5 The CPU power connector provides power to the CPU.
PAGE 36
IMB-H610 Mic ro -ATX Mo th e rb o a rd Figure 3-5: CPU Power Connector Location PIN NO. DESCRIPTION 1 GND 2 GND 3 +12V 4 +12V Table 3-5: CPU Power Connector Pinouts 3.2.5 DDR3 DIMM S lo ts CN La b e l: CHA_DIMM1, CHB_DIMM1 CN Typ e : DDR3 DIMM slot CN Lo c a tio n : See Figure 3-6 The DDR3 DIMM slots are for DDR3 DIMM memory modules.
PAGE 37
IMB-H610 Mic ro -ATX Mo th e rb o a rd Figure 3-6: DDR3 DIMM Slot Locations 3.2.6 De b u g P o rt Co n n e c to r CN La b e l: TS 1 CN Typ e : 9-pin header CN Lo c a tio n : See Figure 3-7 CN P in o u ts : See Table 3-6 The debug port connector is for system debug.
PAGE 38
IMB-H610 Mic ro -ATX Mo th e rb o a rd Figure 3-7: Debug Port Connector Location Pin Description Pin Description 1 RESET# 2 CLOCK 3 GND 4 LPC_AD3 5 LPC_AD2 6 LPC_AD1 7 LPC_AD0 8 LPC_FRAME# 9 NC 10 Table 3-6: Debug Port Connector Pinouts 3.2.7 Dig ita l I/O Co n n e c to r CN La b e l: DIO1 CN Typ e : 10-pin header CN Lo c a tio n : See Figure 3-8 CN P in o u ts : See Table 3-7 The digital I/O connector provides programmable input and output for external devices.
PAGE 39
IMB-H610 Mic ro -ATX Mo th e rb o a rd Figure 3-8: Digital I/O Connector Location PIN NO. DESCRIPTION PIN NO. DESCRIPTION 1 GND 2 +5V 3 DGPO3 4 DGPO2 5 DGPO1 6 DGPO0 7 DGPI3 8 DGPI2 9 DGPI1 10 DGPI0 Table 3-7: Digital I/O Connector Pinouts 3.2.
PAGE 40
IMB-H610 Mic ro -ATX Mo th e rb o a rd Figure 3-9: Front Panel Audio Connector Location Pin Description Pin Description 1 MIC_L 2 GND 3 MIC_R 4 FP_AUO_DETECT 5 LINE2_R 6 GND 7 F_SENCE 8 9 LINE2_L 10 GND Table 3-8: Front Panel Audio Connector Pinouts 3.2.
PAGE 41
IMB-H610 Mic ro -ATX Mo th e rb o a rd Figure 3-10: Front Panel Connector Location FUNCTION PWR_LED PWR_BTN HDD_LED PIN DESCRIPTION 1 ACPILED 3 NC 5 GND 7 FUNCTION PIN DESCRIPTION 2 BEEP_PWR 4 NC 6 NC PWRBTN_SW#_C 8 PC_BEEP 9 GND 10 NC 11 IDELED 12 EXTRST- 13 IDELED- 14 GND BUZZER RESET Table 3-9: Front Panel Connector Pinouts 3.2.
PAGE 42
IMB-H610 Mic ro -ATX Mo th e rb o a rd Figure 3-11: I2C Connector Location Pin Description 1 +5V_DUAL 2 PCH_GP38_PU 3 PCH_GP39_PU 4 GND Table 3-10: I2C Connector Pinouts 3.2.11 P CIe P owe r Co n n e c to r CN La b e l: P CIE_P OWER CN Typ e : 4-pin Molex CN Lo c a tio n : See Figure 3-12 CN P in o u ts : See Table 3-11 PCIe power connector provides extra power to the PCIe x16 card.
PAGE 43
IMB-H610 Mic ro -ATX Mo th e rb o a rd Figure 3-12: PCIe Power Location Pin Description 1 +12 V 2 GND 3 GND 4 +5 V Table 3-11: PCIe Power Pinouts 3.2.12 P CIe x16 S lo t CN La b e l: P CIEX16 CN Typ e : PCIe x16 slot CN Lo c a tio n : See Figure 3-13 The PCIe x16 slot is for PCIe x16 expansion cards.
PAGE 44
IMB-H610 Mic ro -ATX Mo th e rb o a rd Figure 3-13: PCIe x16 Slot Location 3.2.13 P CIe x1 S lo ts CN La b e l: P CIEX1_S LOT1, P CIEX1_S LOT2, P CIEX1_S LOT3 CN Typ e : PCIe x1 slot CN Lo c a tio n : See Figure 3-14 The PCIe x1 slots are for PCIe x1 expansion cards.
PAGE 45
IMB-H610 Mic ro -ATX Mo th e rb o a rd 3.2.14 S ATA 3Gb /s Drive Co n n e c to rs CN La b e l: S ATA12, S ATA34 CN Typ e : 14-pin SATA connector CN Lo c a tio n : See Figure 3-15 CN P in o u ts : See Table 3-12 The SATA drive connectors can be connected to SATA drives and support up to 3Gb/s data transfer rate.
PAGE 46
IMB-H610 Mic ro -ATX Mo th e rb o a rd 3.2.15 S e ria l P o rt Co n n e c to r, RS -422/485 CN La b e l: COM4 CN Typ e : 4-pin wafer CN Lo c a tio n : See Figure 3-16 CN P in o u ts : See Table 3-13 This connector provides RS-422 or RS-485 communications. Figure 3-16: Serial Port Connector ( RS-422/485) Location PIN NO. DESCRIPTION PIN NO. DESCRIPTION 1 RXD485# 2 RXD485 3 TXD485 4 TXD485# Table 3-13: Serial Port Connector ( RS-422/485) Pinouts 3.2.
PAGE 47
IMB-H610 Mic ro -ATX Mo th e rb o a rd Each of these connectors provides RS-232 connections. Figure 3-17: Serial Port Connector Locations PIN NO. DESCRIPTION PIN NO. DESCRIPTION 1 DCD3/5/6 2 DSR3/5/6 3 RXD3/5/6 4 RTS3/5/6 5 TXD3/5/6 6 CTS3/5/6 7 DTR3/5/6 8 RI3/5/6 9 GND 10 GND Table 3-14: Serial Port Connector Pinouts (COM3, COM5, COM6) PIN NO. DESCRIPTION PIN NO.
PAGE 48
IMB-H610 Mic ro -ATX Mo th e rb o a rd PIN NO. DESCRIPTION PIN NO. DESCRIPTION 19 GND 20 GND 21 DCD9 22 DSR9 23 RXD9 24 RTS9 25 TXD9 26 CTS9 27 DTR9 28 RI9 29 GND 30 GND 31 DCD10 32 DSR10 33 RXD10 34 RTS10 35 TXD10 36 CTS10 37 DTR10 38 RI10 39 GND 40 GND Table 3-15: Serial Port Connector Pinouts (COM7-10) 3.2.
PAGE 49
IMB-H610 Mic ro -ATX Mo th e rb o a rd Figure 3-18: SMBus Connector Location PIN DESCRIPTION 1 +5V_DUAL 2 SMBCLK_RESUME 3 SMBDATA_RESUME 4 GND Table 3-16: SMBus Connector Pinouts 3.2.18 S P I Co n n e c to r CN La b e l: SPI CN Typ e : 8-pin header CN Lo c a tio n : See Figure 3-19 CN P in o u ts : See Table 3-17 The SPI connector is used to flash the BIOS.
PAGE 50
IMB-H610 Mic ro -ATX Mo th e rb o a rd Figure 3-19: SPI Connector Location PIN NO. DESCRIPTION PIN NO. DESCRIPTION 1 +3.3V 2 GND 3 CS0 4 CLK 5 SO0 6 SI 7 NC 8 NC Table 3-17: SPI Connector Pinouts 3.2.19 S ys te m Fa n Co n n e c to r CN La b e l: S YS _FAN1, S YS _FAN2 CN Typ e : 3-pin wafer CN Lo c a tio n : See Figure 3-20 CN P in o u ts : See Table 3-18 The fan connector attaches to a cooling fan.
PAGE 51
IMB-H610 Mic ro -ATX Mo th e rb o a rd Figure 3-20: System Fan Connector Locations PIN NO. DESCRIPTION 1 NC 2 VCC12 3 GND Table 3-18: System Fan Connector Pinouts 3.2.20 TP M Co n n e c to r CN La b e l: TPM CN Typ e : 20-pin header CN Lo c a tio n : See Figure 3-21 CN P in o u ts : See Table 3-19 The TPM connector connects to a TPM module.
PAGE 52
IMB-H610 Mic ro -ATX Mo th e rb o a rd Figure 3-21: TPM Connector Location PIN NO. DESCRIPTION PIN NO. DESCRIPTION 1 Clock 2 GND 3 Frame# 4 NC(KEY) 5 Reset# 6 +5V 7 LAD3 8 LAD2 9 +3.3V 10 LAD1 11 LAD0 12 GND 13 SMB CLK 14 SMB DATA 15 +3.3V Standby 16 Serial IRQ 17 GND 18 Clock Run# 19 Power Down# 20 DREQ# Table 3-19: TPM Connector Pinouts 3.2.
PAGE 53
IMB-H610 Mic ro -ATX Mo th e rb o a rd CN P in o u ts : See Table 3-20, Table 3-21 and Table 3-22 The USB connectors connect to USB devices. Each pin header provides two USB ports. Figure 3-22: USB Connector Pinout Locations PIN NO. DESCRIPTION PIN NO. DESCRIPTION 1 VCC 2 GND 3 DATA4_N 4 DATA5_P 5 DATA4_P 6 DATA5_N 7 GND 8 VCC Table 3-20: USB Port Connector Pinouts (USB45) PIN NO. DESCRIPTION PIN NO.
PAGE 54
IMB-H610 Mic ro -ATX Mo th e rb o a rd PIN NO. DESCRIPTION PIN NO. DESCRIPTION 1 VCC 2 GND 3 DATA10_N 4 DATA11_P 5 DATA10_P 6 DATA11_N 7 GND 8 VCC Table 3-22: USB Port Connector Pinouts (USB89) 3.3 Exte rn a l P e rip h e ra l In te rfa c e Co n n e c to r P a n e l The figure below shows the external peripheral interface connector (EPIC) panel.
PAGE 55
IMB-H610 Mic ro -ATX Mo th e rb o a rd CN Lo c a tio n : See Figure 3-23 CN P in o u ts : See Table 3-23 The audio jacks connect to external audio devices.  Line In port (Light Blue): Connects a CD-ROM, DVD player, or other audio devices.  Line Out port (Lime): Connects to a headphone or a speaker. With multi-channel configurations, this port can also connect to front speakers.  Microphone (Pink): Connects a microphone.
PAGE 56
IMB-H610 Mic ro -ATX Mo th e rb o a rd 3.3.2 Eth e rn e t a n d US B Con n e c to rs CN La b e l: LAN1_US B01, LAN2_US B23 CN Typ e : RJ-45, USB CN Lo c a tio n : See Figure 3-23 CN P in o u ts : See Table 3-24, Table 3-25 and Table 3-26 The LAN connector connects to a local network.
PAGE 57
IMB-H610 Mic ro -ATX Mo th e rb o a rd PIN DESCRIPTION PIN DESCRIPTION 1 VCC 2 VCC 3 DATA8_N 4 DATA9_N 5 DATA8_P 6 DATA9_P 7 GND 8 GND Table 3-25: USB Connector Pinouts (USB01) PIN DESCRIPTION PIN DESCRIPTION 1 VCC 2 VCC 3 DATA2_N 4 DATA3_N 5 DATA2_P 6 DATA3_P 7 GND 8 GND Table 3-26: USB Connector Pinouts (USB23) 3.3.
PAGE 58
IMB-H610 Mic ro -ATX Mo th e rb o a rd 3.3.4 RS -232 S e ria l P o rt Co n n e c to rs CN La b e l: COM12 CN Typ e : DB-9 Male CN Lo c a tio n : See Figure 3-23 CN P in o u ts : See Table 3-28 The serial port connects to a RS-232 serial communications device. Figure 3-26: RS-232 Serial Port Connector PIN NO. DESCRIPTION PIN NO.
PAGE 59
IMB-H610 Mic ro -ATX Mo th e rb o a rd CN Lo c a tio n : See Figure 3-23 CN P in o u ts : See Table 3-29 and Table 3-30 The VGA connector connects to a monitor that accepts a standard VGA input.
PAGE 60
IMB-H610 Mic ro -ATX Mo th e rb o a rd PIN DESCRIPTION PIN DESCRIPTION 15 GND 16 HPD 17 DATA0- 18 DATA0+ 19 GND 20 NC 21 NC 22 GND 23 CLOCK+ 24 CLOCK- Table 3-30: DVI Connector Pinouts P a g e 45
PAGE 61
IMB-H610 Mic ro -ATX Mo th e rb o a rd Ch a p te r 4 4 In s ta lla tio n P a g e 46
PAGE 62
IMB-H610 Mic ro -ATX Mo th e rb o a rd 4.1 An ti-s ta tic P re c a u tio n s WARNING: Failure to take ESD precautions during the installation of the IMB-H610 may result in permanent damage to the IMB-H610 and severe injury to the user. Electrostatic discharge (ESD) can cause serious damage to electronic components, including the IMB-H610. Dry climates are especially susceptible to ESD.
PAGE 63
IMB-H610 Mic ro -ATX Mo th e rb o a rd WARNING: The installation instructions described in this manual should be carefully followed in order to prevent damage to the IMB-H610, IMB-H610 components and injury to the user. Before and during the installation please DO the following:  Read the user manual: o The user manual provides a complete description of the IMB-H610 installation instructions and configuration options.
PAGE 64
IMB-H610 Mic ro -ATX Mo th e rb o a rd 4.3 Ba s ic In s ta lla tio n WARNING: A CPU should never be turned on without the specified cooling kit being installed. If the cooling kit (heat sink and fan) is not properly installed and the system turned on, permanent damage to the CPU, IMB-H610 and other electronic components attached to the system may be incurred. Running a CPU without a cooling kit may also result in injury to the user.
PAGE 65
IMB-H610 Mic ro -ATX Mo th e rb o a rd S te p 1: Disengage the load lever by pressing the lever down and slightly outwards to clear the retention tab. Fully open the lever. See Figure 4-1. Figure 4-1: Disengage the CPU Socket Load Lever S te p 2: Open the socket and remove the protective cover. The black protective cover can be removed by pulling up on the tab labeled “Remove”. See Figure 4-2. Figure 4-2: Remove Protective Cover S te p 3: Inspect the CPU socket.
PAGE 66
IMB-H610 Mic ro -ATX Mo th e rb o a rd S te p 4: Orientate the CPU properly. The contact array should be facing the CPU socket. S te p 5: Correctly position the CPU. Match the Pin 1 mark with the CPU edge on the CPU socket. S te p 6: Align the CPU pins. Locate pin 1 and the two orientation notches on the CPU. Carefully match the two orientation notches on the CPU with the socket alignment keys. S te p 7: Insert the CPU. Gently insert the CPU into the socket.
PAGE 67
IMB-H610 Mic ro -ATX Mo th e rb o a rd Figure 4-4: Close the Socket LGA1155 S te p 9: Connect the 12 V power to the board. Connect the 12 V power from the power supply to the board. 4.3.2 Co o lin g Kit In s ta lla tio n WARNING: DO NOT use the original Intel® heat sink and fan. A proprietary one is recommended. Figure 4-5: Cooling Kits (CF-1156A-RS, CF-1156B-RS, CF-1156C-RS, CF-1156D-RS) The cooling kit can be bought from IEI. The cooling kit has a heat sink and fan.
PAGE 68
IMB-H610 Mic ro -ATX Mo th e rb o a rd WARNING: Do not wipe off (accidentally or otherwise) the pre-sprayed layer of thermal paste on the bottom of the heat sink. The thermal paste between the CPU and the heat sink is important for optimum heat dissipation. To install the cooling kit, follow the instructions below. S te p 1: A cooling kit bracket is pre-installed on the rear of the motherboard. See Figure 4-6.
PAGE 69
IMB-H610 Mic ro -ATX Mo th e rb o a rd S te p 4: Secure the cooling kit by fastening the four retention screw of the cooling kit. S te p 5: Connect the fan cable. Connect the cooling kit fan cable to the fan connector on the IMB-H610. Carefully route the cable and avoid heat generating chips and fan blades. 4.3.3 DIMM In s ta lla tio n To install a DIMM, please follow the steps below and refer to Figure 4-7. Figure 4-7: DIMM Installation S te p 1: Open the DIMM socket handles.
PAGE 70
IMB-H610 Mic ro -ATX Mo th e rb o a rd 4.4 J u m p e r S e ttin g s NOTE: A jumper is a metal bridge used to close an electrical circuit. It consists of two or three metal pins and a small metal clip (often protected by a plastic cover) that slides over the pins to connect them. To CLOSE/SHORT a jumper means connecting the pins of the jumper with the plastic clip and to OPEN a jumper means removing the Figure 4-8: Jumper Locations plastic clip from a jumper.
PAGE 71
IMB-H610 Mic ro -ATX Mo th e rb o a rd Setting Description Closed ATX Mode (Default) Open AT Mode Table 4-2: AT/ATX Power Select Jumper Settings Figure 4-9: AT/ATX Power Select Jumper Location 4.4.
PAGE 72
IMB-H610 Mic ro -ATX Mo th e rb o a rd If the “CMOS Settings Wrong” message is displayed during the boot up process, the fault may be corrected by pressing the F1 to enter the CMOS Setup menu. Do one of the following:   Enter the correct CMOS setting   Load Optimal Defaults   Load Failsafe Defaults. After having done one of the above, save the changes and exit the CMOS Setup menu.
PAGE 73
IMB-H610 Mic ro -ATX Mo th e rb o a rd The USB power select jumpers allow the user to select the USB power setting. Setting Description Short 1-2 +5V Short 2-3 +5V_Dual (Default) Table 4-4: USB Power Select Jumper Settings Figure 4-11: USB Power Select Jumpers Location 4.5 In te rn a l P e rip h e ra l De vic e Co n n e c tio n s This section outlines the installation of peripheral devices to the onboard connectors. 4.5.
PAGE 74
IMB-H610 Mic ro -ATX Mo th e rb o a rd Figure 4-12: SATA Drive Cable Connection S te p 3: Connect the cable to the SATA disk. Connect the connector on the other end of the cable to the connector at the back of the SATA drive. See Figure 4-13. S te p 4: Connect the SATA power cable (optional). Connect the SATA power connector to the back of the SATA drive. See Figure 4-13.
PAGE 75
IMB-H610 Mic ro -ATX Mo th e rb o a rd Figure 4-13: SATA Power Drive Connection The SATA power cable can be bought from IEI. See Optional Items in Section 2.4. 4.6 Exte rn a l P e rip h e ra l In te rfa c e Co n n e c tio n This section describes connecting devices to the external connectors on the IMB-H610. 4.6.1 Au d io Co n n e c tio n The audio jacks on the external audio connector enable the IMB-H610 to be connected to a stereo sound setup. Each jack supports both input and output.
PAGE 76
IMB-H610 Mic ro -ATX Mo th e rb o a rd  Line In port (Light Blue): Connects a CD-ROM, DVD player, or other audio devices.  Line Out port (Lime): Connects to a headphone or a speaker.  Microphone (Pink): Connects a microphone. Figure 4-14: Audio Connector S te p 3: Check audio clarity. Check that the sound is coming through the right speakers by adjusting the balance front to rear and left to right. 4.6.
PAGE 77
IMB-H610 Mic ro -ATX Mo th e rb o a rd S te p 3: Insert the DVI-I connector. Once the connectors are properly aligned with the male connector, insert the male connector from the digital display device into the female connector on the IMB-H610. See Figure 4-15. Figure 4-15: DVI Connector S te p 4: Secure the connector. Secure the DVI-I connector from the digital display device to the external interface by tightening the two retention screws on either side of the connector. 4.6.
PAGE 78
IMB-H610 Mic ro -ATX Mo th e rb o a rd Figure 4-16: LAN Connection S te p 3: Insert the LAN cable RJ-45 connector. Once aligned, gently insert the LAN cable RJ-45 connector into the on-board RJ-45 connector. 4.6.4 P S /2 Ke yb o a rd a n d Mo u s e Co n n e c tio n The IMB-H610 has a dual PS/2 connector on the external peripheral interface panel. The dual PS/2 connector is used to connect to a keyboard and mouse to the system. Follow the steps below to connect a keyboard and mouse to the IMB-H610.
PAGE 79
IMB-H610 Mic ro -ATX Mo th e rb o a rd Figure 4-17: PS/2 Keyboard/Mouse Connector 4.6.5 S e ria l De vic e Co n n e c tio n The IMB-H610 has two DB-9 male connectors on the external peripheral interface panel for serial devices. Follow the steps below to connect serial devices to the IMB-H610. S te p 1: Locate the DB-9 connector. The location of the DB-9 connector is shown in Chapter 3. S te p 2: Insert the serial connector.
PAGE 80
IMB-H610 Mic ro -ATX Mo th e rb o a rd Figure 4-18: Serial Device Connector S te p 3: Secure the connector. Secure the serial device connector to the external interface by tightening the two retention screws on either side of the connector. 4.6.6 US B Co n n e c tio n The external USB Series "A" receptacle connectors provide easier and quicker access to external USB devices. Follow the steps below to connect USB devices to the IMB-H610. S te p 1: Locate the USB Series "A" receptacle connectors.
PAGE 81
IMB-H610 Mic ro -ATX Mo th e rb o a rd Figure 4-19: USB Connector 4.6.7 VGA Mo n ito r Co n n e c tio n The IMB-H610 has a single female DB-15 connector on the external peripheral interface panel. The DB-15 connector is connected to a CRT or VGA monitor. To connect a monitor to the IMB-H610, please follow the instructions below. S te p 1: Locate the female DB-15 connector. The location of the female DB-15 connector is shown in Chapter 3. S te p 2: Align the VGA connector.
PAGE 82
IMB-H610 Mic ro -ATX Mo th e rb o a rd Figure 4-20: VGA Connector S te p 4: Secure the connector. Secure the DB-15 VGA connector from the VGA monitor to the external interface by tightening the two retention screws on either side of the connector.
PAGE 83
IMB-H610 Mic ro -ATX Mo th e rb o a rd Ch a p te r 5 5 BIOS P a g e 68
PAGE 84
IMB-H610 Mic ro -ATX Mo th e rb o a rd 5.1 In tro d u c tio n The BIOS is programmed onto the BIOS chip. The BIOS setup program allows changes to certain system settings. This chapter outlines the options that can be changed. 5.1.1 Sta rtin g S e tu p The UEFI BIOS is activated when the computer is turned on. The setup program can be activated in one of two ways. 1. Press the F2 or DELETE key as soon as the system is turned on or 2.
PAGE 85
IMB-H610 Mic ro -ATX Mo th e rb o a rd Ke y Fu n c tio n F2 key Load previous values. F3 key Load optimized defaults F4 key Save changes and Exit BIOS Table 5-1: BIOS Navigation Keys 5.1.3 Ge ttin g He lp When F1 is pressed a small help window describing the appropriate keys to use and the possible selections for the highlighted item appears. To exit the Help Window press ESC or the F1 key again. 5.1.
PAGE 86
IMB-H610 Mic ro -ATX Mo th e rb o a rd 5.2 Ma in The Main BIOS menu (BIOS Menu 1) appears when the BIOS Setup program is entered. The Main menu gives an overview of the basic system information. Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc. Main Advanced Chipset Boot Security Save & Exit BIOS Information BIOS Vendor Core Version Compliency Project Version Build Date and Time American Megatrends 4.6.4.0 0.03 UEFI 2.0 SA58AZ02.ROM 08/05/2011 11:53:40 Set the Date.
PAGE 87
IMB-H610 Mic ro -ATX Mo th e rb o a rd The System Overview field also has two user configurable fields:  S ys te m Da te [xx/xx/xx] Use the System Date option to set the system date. Manually enter the day, month and year.  S ys te m Tim e [xx:xx:xx] Use the System Time option to set the system time. Manually enter the hours, minutes and seconds. 5.
PAGE 88
IMB-H610 Mic ro -ATX Mo th e rb o a rd Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc.
PAGE 89
IMB-H610 Mic ro -ATX Mo th e rb o a rd  ACP I S le e p Sta te [S 1 (CP U Sto p Clo c k)] Use the ACPI Sleep State option to specify the sleep state the system enters when it is not being used.  Suspend Disabled  S1 (CPU Stop DEFAULT The system enters S1(POS) sleep state. The system appears off. The CPU is stopped; RAM is Clock) refreshed; the system is running in a low power mode.  S3 (Suspend The caches are flushed and the CPU is powered to off. Power to the RAM is maintained.
PAGE 90
IMB-H610 Mic ro -ATX Mo th e rb o a rd  TPM S u p p o rt [Dis a b le ] Use the TPM Support option to configure support for the TPM.  Disable DEFAULT TPM support is disabled.  Enable TPM support is enabled. 5.3.3 CP U Co n fig u ra tio n Use the CPU Configuration menu (BIOS Menu 5) to enter the CPU Information submenu or enable Intel Virtualization Technology. Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc.
PAGE 91
IMB-H610 Mic ro -ATX Mo th e rb o a rd  Ac tive P ro c e s s o r Co re s [All] Use the Active Processor Cores option to configure the number of the active processor cores.  All  1 Active one of the processor cores  2 Active two of the processor cores  3 Active three of the processor cores DEFAULT Active all of the processor cores 5.3.3.1 CP U In fo rm a tio n Use the CPU Information submenu (BIOS Menu 6) to view detailed CPU specifications and configure the CPU.
PAGE 92
IMB-H610 Mic ro -ATX Mo th e rb o a rd  Min CPU Speed: Lists the minimum CPU processing speed.  Processor Cores: Lists the number of the processor core  Intel HT Technology: Indicates if Intel HT Technology is supported by the CPU.  Intel VT-x Technology: Indicates if Intel VT-x Technology is supported by the CPU.  Intel SMX Technology: Indicates if Intel SMX Technology is supported by the CPU.  L1 Data Cache: Lists the amount of data storage space on the L1 cache.
PAGE 93
IMB-H610 Mic ro -ATX Mo th e rb o a rd 5.3.4 S ATA Co n fig u ra tio n Use the SATA Configuration menu (BIOS Menu 7) to change and/or set the configuration of the SATA devices installed in the system. Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc. Advanced SATA Configuration (1) IDE Mode. (2) AHCI Mode. (3) RAID Mode.
PAGE 94
IMB-H610 Mic ro -ATX Mo th e rb o a rd   Disable Disables SATA devices.  IDE Mode Configures SATA devices as normal IDE device.  AHCI Mode  RAID Mode DEFAULT Configures SATA devices as AHCI device. Configures SATA devices as RAID device. Sta g g e re d Sp in -u p [Dis a b le d ] Staggered Spin-up allows the system to power up one drive at a time to prevent excess power consumption. Use the Staggered Spin-up option to enable or disable the staggered spin-up function.
PAGE 95
IMB-H610 Mic ro -ATX Mo th e rb o a rd Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc. Advanced Intel Trusted Execution Technology Configuration Intel TXT support only can be enabled/disabled if SMX is enabled. VT and VT-d support must also be enabled prior to TXT. Secure Mode Extensons (SMX) Enabled Intel TXT(LT) Support [Disabled] --------------------: Select Screen ↑ ↓: Select Item Enter Select +/-: Change Opt.
PAGE 96
IMB-H610 Mic ro -ATX Mo th e rb o a rd  US B De vic e s The USB Devices Enabled field lists the USB devices that are enabled on the system  US B S u p p o rt [En a b le d ] Use the USB Support option to enable or disable USB support on the system.   Disabled  Enabled USB support disabled DEFAULT USB support enabled Le g a c y US B S u p p o rt [En a b le d ] Use the Legacy USB Support BIOS option to enable USB mouse and USB keyboard support.
PAGE 97
IMB-H610 Mic ro -ATX Mo th e rb o a rd 5.3.7 S u pe r IO Co n fig u ra tio n Use the Super IO Configuration menu (BIOS Menu 10) to set or change the configurations for the FDD controllers, parallel ports and serial ports. Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc.
PAGE 98
IMB-H610 Mic ro -ATX Mo th e rb o a rd 5.3.7.1 S e ria l P o rt n Co n fig u ra tio n Use the Serial Port n Configuration menu (BIOS Menu 11) to configure the serial port n. Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc. Advanced Serial Port n Configuration Serial Port Device Settings Enable or Disable Serial Port (COM) [Enabled] IO=3F8h; IRQ=4 --------------------: Select Screen ↑ ↓: Select Item Enter Select +/-: Change Opt.
PAGE 99
IMB-H610 Mic ro -ATX Mo th e rb o a rd     IO=3F8h; Serial Port I/O port address is 3F8h and the interrupt IRQ=3, 4 address is IRQ3,4 IO=2F8h; Serial Port I/O port address is 2F8h and the interrupt IRQ=3, 4 address is IRQ3,4 IO=2C0h; Serial Port I/O port address is 2C0h and the interrupt IRQ=10, 11 address is IRQ10, 11 IO=2C8h; Serial Port I/O port address is 2C8h and the interrupt IRQ=10, 11 address is IRQ10, 11 5.3.7.1.
PAGE 100
IMB-H610 Mic ro -ATX Mo th e rb o a rd  IO=2C8h; Serial Port I/O port address is 2C8h and the interrupt IRQ=10, 11 address is IRQ10, 11 5.3.7.1.3 S e ria l P o rt 3 Co n fig u ra tio n  S e ria l P o rt [En a b le d ] Use the Serial Port option to enable or disable the serial port.   Disabled  Enabled Disable the serial port DEFAULT Enable the serial port Ch a n g e S e ttin g s [Au to ] Use the Change Settings option to change the serial port IO port address and interrupt address.
PAGE 101
IMB-H610 Mic ro -ATX Mo th e rb o a rd 5.3.7.1.4 S e ria l P o rt 4 Co n fig u ra tio n  S e ria l P o rt [En a b le d ] Use the Serial Port option to enable or disable the serial port.   Disabled  Enabled Disable the serial port DEFAULT Enable the serial port Ch a n g e S e ttin g s [Au to ] Use the Change Settings option to change the serial port IO port address and interrupt address.  Auto DEFAULT The serial port IO port address and interrupt address are automatically detected.
PAGE 102
IMB-H610 Mic ro -ATX Mo th e rb o a rd 5.3.7.1.5 S e ria l P o rt 5 Co n fig u ra tio n  S e ria l P o rt [En a b le d ] Use the Serial Port option to enable or disable the serial port.   Disabled  Enabled Disable the serial port DEFAULT Enable the serial port Ch a n g e S e ttin g s [Au to ] Use the Change Settings option to change the serial port IO port address and interrupt address.  Auto DEFAULT The serial port IO port address and interrupt address are automatically detected.
PAGE 103
IMB-H610 Mic ro -ATX Mo th e rb o a rd   Disabled  Enabled Disable the serial port DEFAULT Enable the serial port Ch a n g e S e ttin g s [Au to ] Use the Change Settings option to change the serial port IO port address and interrupt address.  Auto DEFAULT The serial port IO port address and interrupt address are automatically detected.
PAGE 104
IMB-H610 Mic ro -ATX Mo th e rb o a rd Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc. Advanced PC Health Status Smart FAN Configuration CPU Temperature SYS Temperature CPU FAN Speed SYS FAN Speed VCC3V V_core +1.05V VDDR VSB3V VBAT 5VSB :+50 C :+44 C :2189 RPM :N/A :+3.344 V :+1.248 V :+1.064 V :+1.616 V :+3.424 V :+2.816 V :+4.968 V --------------------: Select Screen ↑ ↓: Select Item Enter Select +/-: Change Opt.
PAGE 105
IMB-H610 Mic ro -ATX Mo th e rb o a rd 5.3.8.1 FAN 1 Co n fig u ra tio n Use the FAN 1 Configuration submenu (BIOS Menu 13) to configure fan 1 temperature and speed settings. Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc.
PAGE 106
IMB-H610 Mic ro -ATX Mo th e rb o a rd  Ta rg e t Te m p . S e n s o r [CP U Te m p e ra tu re ] Use the Target Temp. Sensor option to set the target CPU temperature.    CPU DEFAULT Sets the target temperature sensor to the CPU Temperature temperature. System Sets the target temperature sensor to the System Temperature Temperature setting. Te m p e ra tu re Bo u n d n Use the + or – key to change the fan Temperature Bound n value. Enter a decimal number between 0 and 127.
PAGE 107
IMB-H610 Mic ro -ATX Mo th e rb o a rd Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc.
PAGE 108
IMB-H610 Mic ro -ATX Mo th e rb o a rd   System Sets the target temperature sensor to the System Temperature Temperature setting. Te m p e ra tu re Bo u n d n Use the + or – key to change the fan Temperature Bound n value. Enter a decimal number between 0 and 127.  S e g m e n t n Sp e e d (P WM) Use the + or – key to change the fan Segment n Speed value in Pulse Width Modulation (PWM). Enter a decimal number between 0 and 100. 5.3.
PAGE 109
IMB-H610 Mic ro -ATX Mo th e rb o a rd 5.3.9.1 S e ria l P o rt 7 Co n fig u ra tio n  S e ria l P o rt [En a b le d ] Use the Serial Port option to enable or disable the serial port.   Disabled  Enabled Disable the serial port DEFAULT Enable the serial port Ch a n g e S e ttin g s [Au to ] Use the Change Settings option to change the serial port IO port address and interrupt address.  Auto DEFAULT The serial port IO port address and interrupt address are automatically detected.
PAGE 110
IMB-H610 Mic ro -ATX Mo th e rb o a rd  Normal DEFAULT Enables the serial port to function in normal mode.    IR Mode, Enables the serial port to function in IR mode, Pusle 1.6us, Full Duplex pulse 1.6 us at full duplex. IR Enables the serial port to function in IR mode, Mode, Pusle 1.6us, Half Duplex pulse 1.6 us at half duplex. IR Enables the serial port to function in IR mode, Mode, Pusle pulse 3/16 bit time at full duplex.
PAGE 111
IMB-H610 Mic ro -ATX Mo th e rb o a rd     IO=2C0h; Serial Port I/O port address is 2C0h and the interrupt IRQ=10, 11 address is IRQ10, 11 IO=2C8h; Serial Port I/O port address is 2C8h and the interrupt IRQ=10, 11 address is IRQ10, 11 IO=2B0h; Serial Port I/O port address is 2B0h and the interrupt IRQ=10, 11 address is IRQ10, 11 IO=2B8h; Serial Port I/O port address is 2B8h and the interrupt IRQ=10, 11 address is IRQ10, 11 5.3.9.
PAGE 112
IMB-H610 Mic ro -ATX Mo th e rb o a rd   IO=2B0h; Serial Port I/O port address is 2B0h and the interrupt IRQ=10, 11 address is IRQ10, 11 IO=2B8h; Serial Port I/O port address is 2B8h and the interrupt IRQ=10, 11 address is IRQ10, 11 5.3.9.4 S e ria l P o rt 10 Co n fig u ra tio n  S e ria l P o rt [En a b le d ] Use the Serial Port option to enable or disable the serial port.
PAGE 113
IMB-H610 Mic ro -ATX Mo th e rb o a rd 5.3.10 S e ria l P o rt Co n s o le Re d ire c tio n The Serial Port Console Redirection menu (BIOS Menu 16) allows the console redirection options to be configured. Console redirection allows users to maintain a system remotely by re-directing keyboard input and text output through the serial port.
PAGE 114
IMB-H610 Mic ro -ATX Mo th e rb o a rd Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc.
PAGE 115
IMB-H610 Mic ro -ATX Mo th e rb o a rd   Disabled  Enabled Disabled the console redirection function DEFAULT Enabled the console redirection function Te rm in a l Typ e [VT-100+] Use the Terminal Type option to specify the remote terminal type.
PAGE 116
IMB-H610 Mic ro -ATX Mo th e rb o a rd Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc. Advanced iEi Feature  Auto Recovery Function [Disabled] Auto Recovery Function Reboot and recover system automatically within 10 min, when OS crashes. Please install Auto Recovery API service before enabling this function. --------------------: Select Screen ↑ ↓: Select Item Enter Select +/-: Change Opt.
PAGE 117
IMB-H610 Mic ro -ATX Mo th e rb o a rd WARNING! Setting the wrong values for the Chipset BIOS selections in the Chipset BIOS menu may cause the system to malfunction. Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc. Main Advanced Chipset Boot Security Save & Exit > > > > North Bridge South Bridge Integrated Graphics ME Subsystem North Bridge Parameters --------------------: Select Screen ↑ ↓: Select Item Enter Select +/-: Change Opt.
PAGE 118
IMB-H610 Mic ro -ATX Mo th e rb o a rd 5.4.1 No rth b rid g e Co n fig u ra tio n Use the Northbridge Chipset Configuration menu (BIOS Menu 19) to configure the Northbridge chipset. Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc. Chipset Memory Information Total Memory Memory Memory Memory Memory 2048 MB (DDR3 1333) Slot0 Slot1 Slot2 Slot3 Select which graphics controller to use as the primary boot device.
PAGE 119
IMB-H610 Mic ro -ATX Mo th e rb o a rd  IGD Me m o ry [64 M] Use the IGD Memory option to specify the amount of system memory that can be used by the Internal graphics device.
PAGE 120
IMB-H610 Mic ro -ATX Mo th e rb o a rd  480 MB of memory used by internal graphics 480 M device  512 MB of memory used by internal graphics 512 M device  P CI Exp re s s P o rt [En a b le d ] Use the PCI Express Port option to enable or disable the PCI Express port.   Disabled  Enabled Disables the PCI Express port. DEFAULT Enables the PCI Express port. VT-d [Dis a b le d ] Use the VT-d option to enable or disable VT-d support.  Disabled  Enabled DEFAULT Disables VT-d support.
PAGE 121
IMB-H610 Mic ro -ATX Mo th e rb o a rd Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc.
PAGE 122
IMB-H610 Mic ro -ATX Mo th e rb o a rd  Gb E P XE Bo o t [Dis a b le d ] Use the GbE PXE Boot option to enable or disable the boot option for GbE devices.   Disabled  Enabled DEFAULT Disables the GbE PXE Boot option Enables the GbE PXE Boot option Re s to re o n AC P o we r Lo s s [P o we r Off] Use the Restore on AC Power Loss BIOS option to specify what state the system returns to if there is a sudden loss of power to the system.
PAGE 123
IMB-H610 Mic ro -ATX Mo th e rb o a rd   Disabled  Enabled Disables Resume on Ring option DEFAULT Enables Resume on Ring option Re s u m e o n P S /2 [En a b le d ] Use the Resume on PS/2 option to enable or disable resuming from PS/2 activation.   Disabled  Enabled Disables Resume on PS/2 option DEFAULT Enables Resume on PS/2 option Aza lia HD Au d io [En a b le d ] Use the Azalia HD Audio option to enable or disable the High Definition Audio controller.
PAGE 124
IMB-H610 Mic ro -ATX Mo th e rb o a rd   Disabled  Enabled The onboard PCIe LAN controller is disabled DEFAULT The onboard PCIe LAN controller is ensabled P CIe LAN P XE Bo o t [Dis a b le d ] Use the PCIe LAN PXE Boot option to enable or disable the boot option for the PCIe LAN PXE.   Disabled  Enabled DEFAULT Disables PCIe LAN PXE Boot option Enables PCIe LAN PXE Boot option P CIe US B3.0 Co n tro lle r [En a b le d ] Use the PCIe USB3.
PAGE 125
IMB-H610 Mic ro -ATX Mo th e rb o a rd Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc. Advanced Intel IGD SWSCI OpRegion Configuration DVMT Mode Select DVMT Memory [DVMT Mode] [Maximum] IGD - Boot Type [AUTO] Select DVMT Mode used by Internal Graphics Device. If Fixed Mode selected, IGD Memory might need to be changed to a larger value, for IGD to have sufficient memory. --------------------: Select Screen ↑ ↓: Select Item Enter Select +/-: Change Opt.
PAGE 126
IMB-H610 Mic ro -ATX Mo th e rb o a rd  IGD - Bo o t Typ e [AUTO] Use the IGD - Boot Type option to select the display device used by the system when it boots. For dual display support, select “Auto.” Configuration options are listed below.  AUTO  CRT  DVI  HDMI DEFAULT 5.4.4 ME S u b s ys te m Use the ME Subsystem menu (BIOS Menu 22) to configure the Intel® Management Engine (ME) configuration options. Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc.
PAGE 127
IMB-H610 Mic ro -ATX Mo th e rb o a rd  Enables user to enter MEBx setup Enter MEBx Setup  Un c o n fig u re AMT/ME [Dis a b le d ] Use the Unconfigure AMT/ME option to perform AMT/ME unconfigure without password operation.  Disabled  Enabled DEFAULT Not perform AMT/ME unconfigure To perform AMT/ME unconfigure 5.5 Bo o t Use the Boot menu (BIOS Menu 23) to configure system boot options. Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc.
PAGE 128
IMB-H610 Mic ro -ATX Mo th e rb o a rd  On DEFAULT Allows the Number Lock on the keyboard to be enabled automatically when the computer system boots up. This allows the immediate use of the 10-key numeric keypad located on the right side of the keyboard. To confirm this, the Number Lock LED light on the keyboard is lit.  Does not enable the keyboard Number Lock Off automatically. To use the 10-keys on the keyboard, press the Number Lock key located on the upper left-hand corner of the 10-key pad.
PAGE 129
IMB-H610 Mic ro -ATX Mo th e rb o a rd Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc. Main Advanced Chipset Boot Security Save & Exit Password Description Set Setup Administrator Password If ONLY the Administrator’s password is set, then this only limits access to Setup and is only asked for when entering Setup. If ONLY the User’s password is set, then this is a power on password and must be entered to boot or enter Setup. In Setup the User will have Administrator rights.
PAGE 130
IMB-H610 Mic ro -ATX Mo th e rb o a rd Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc. Main Advanced Chipset Boot Security Save & Exit Save Changes and Reset Discard Changes and Reset Reset the system after saving the changes. Restore Defaults Save as User Defaults Restore User Defaults --------------------: Select Screen ↑ ↓: Select Item Enter Select +/-: Change Opt. F1: General Help F2: Previous Values F3: Optimized Defaults F4: Save & Exit ESC: Exit Version 2.11.1210.
PAGE 131
IMB-H610 Mic ro -ATX Mo th e rb o a rd Chapter 6 6 S o ftwa re Drive rs P a g e 116
PAGE 132
IMB-H610 Mic ro -ATX Mo th e rb o a rd 6.1 Ava ila b le S o ftwa re Drive rs NOTE: The content of the CD may vary throughout the life cycle of the product and is subject to change without prior notice. Visit the IEI website or contact technical support for the latest updates. The following drivers can be installed on the system:  Chipset  Graphic  LAN  Audio Installation instructions are given below. 6.
PAGE 133
IMB-H610 Mic ro -ATX Mo th e rb o a rd Figure 6-1: Introduction Screen S te p 3: Click IMB-H610. S te p 4: A new screen with a list of available drivers appears (Figure 6-2).
PAGE 134
IMB-H610 Mic ro -ATX Mo th e rb o a rd S te p 5: Install all of the necessary drivers in this menu. 6.3 Ch ips e t Drive r In s ta lla tio n To install the chipset driver, please do the following. S te p 1: Access the driver list. (See Section 6.2) S te p 2: Click “Chipset”. S te p 3: Locate the setup file and double click on it. S te p 4: The setup files are extracted as shown in Figure 6-3.
PAGE 135
IMB-H610 Mic ro -ATX Mo th e rb o a rd Figure 6-4: Chipset Driver Welcome Screen S te p 7: The license agreement in Figure 6-5 appears. S te p 8: Read the License Agreement. S te p 9: Click Yes to continue.
PAGE 136
IMB-H610 Mic ro -ATX Mo th e rb o a rd S te p 10: The Read Me file in Figure 6-6 appears. S te p 11: Click Next to continue. Figure 6-6: Chipset Driver Read Me File S te p 12: Setup Operations are performed as shown in Figure 6-7. S te p 13: Once the Setup Operations are complete, click Next to continue.
PAGE 137
IMB-H610 Mic ro -ATX Mo th e rb o a rd Figure 6-7: Chipset Driver Setup Operations S te p 14: The Finish screen in Figure 6-8 appears. S te p 15: Select “Yes, I want to restart this computer now” and click Finish.
PAGE 138
IMB-H610 Mic ro -ATX Mo th e rb o a rd 6.4 Gra p h ic s Drive r In s ta lla tio n To install the Graphics driver, please do the following. S te p 1: Access the driver list. (See Section 6.2) S te p 2: Click “VGA” and select the folder which corresponds to the operating system. S te p 3: Double click the setup file. S te p 4: The Welcome Screen in Figure 6-9 appears. S te p 5: Click Next to continue.
PAGE 139
IMB-H610 Mic ro -ATX Mo th e rb o a rd Figure 6-10: Graphics Driver License Agreement S te p 8: Setup Operations are performed as shown in Figure 6-11. S te p 9: Once the Setup Operations are complete, click Next to continue.
PAGE 140
IMB-H610 Mic ro -ATX Mo th e rb o a rd S te p 10: The Finish screen in Figure 6-12 appears. S te p 11: Select “Yes, I want to restart this computer now” and click Finish.S te p 0: Figure 6-12: Graphics Driver Installation Finish Screen 6.5 LAN Drive r In s ta lla tio n To install the LAN driver, please do the following. S te p 1: Access the driver list. (See Section 6.2) S te p 2: Click “LAN” and select the folder which corresponds to the operating system. S te p 3: Double click the setup file.
PAGE 141
IMB-H610 Mic ro -ATX Mo th e rb o a rd Figure 6-13: LAN Driver Welcome Screen S te p 5: Click Next to continue. S te p 6: The Ready to Install the Program Screen in Figure 6-14 appears. S te p 7: Click Install to proceed with the installation. Figure 6-14: LAN Driver Ready to Install Screen S te p 8: P a g e 126 The program begins to install.
PAGE 142
IMB-H610 Mic ro -ATX Mo th e rb o a rd S te p 9: The Setup Status screen in Figure 6-15 appears. Figure 6-15: LAN Driver Setup Status Screen S te p 10: When the driver installation is complete, the screen in Figure 6-16 appears. S te p 11: Click Finish to exit.
PAGE 143
IMB-H610 Mic ro -ATX Mo th e rb o a rd 6.6 Au d io Drive r In s ta lla tio n To install the audio driver, please do the following. S te p 1: Access the driver list. (See Section 6.2) S te p 2: Click “Audio” and select the folder which corresponds to the operating system. S te p 3: Double click the setup file. S te p 4: The InstallShield Wizard starts to extracting files (Figure 6-17). Figure 6-17: Audio Driver – Extracting Files S te p 5: The Audio Driver Welcome message in Figure 6-18 appears.
PAGE 144
IMB-H610 Mic ro -ATX Mo th e rb o a rd Figure 6-18: Audio Driver Welcome Screen S te p 7: The audio driver installation begins. See Figure 6-19. Figure 6-19: Audio Driver Installation S te p 8: When the installation is complete, the screen in Figure 6-20 appears. S te p 9: Select “Yes, I want to restart my computer now” and click OK.
PAGE 145
IMB-H610 Mic ro -ATX Mo th e rb o a rd Ap p e n d ix A A BIOS Op tio n s P a g e 130
PAGE 146
IMB-H610 Mic ro -ATX Mo th e rb o a rd Below is a list of BIOS configuration options in the BIOS chapter.  System Overview .................................................................................................................71  Memory Information ............................................................................................................71  System Date [xx/xx/xx] ........................................................................................................
PAGE 147
IMB-H610 Mic ro -ATX Mo th e rb o a rd  Segment n Speed (%) ..........................................................................................................91  Full Speed Count .................................................................................................................91  CPU Smart Fan control [Auto by Duty-Cycle] ...................................................................92  Target Temp. Sensor [CPU Temperature] .............................................
PAGE 148
IMB-H610 Mic ro -ATX Mo th e rb o a rd  PCIe LAN PXE Boot [Disabled] .........................................................................................109  PCIe USB3.0 Controller [Enabled] ....................................................................................109  PCIe x8 Slot [Enabled] .......................................................................................................109  DVMT Mode Select [DVMT Mode] ........................................................
PAGE 149
IMB-H610 Mic ro -ATX Mo th e rb o a rd Ap p e n d ix B B On e Ke y Re c o ve ry P a g e 134
PAGE 150
IMB-H610 Mic ro -ATX Mo th e rb o a rd B.1 On e Ke y Re c o ve ry In tro d u c tio n The IEI one key recovery is an easy-to-use front end for the Norton Ghost system backup and recovery tool. The one key recovery provides quick and easy shortcuts for creating a backup and reverting to that backup or for reverting to the factory default settings. The IEI One Key Recovery tool menu is shown below.
PAGE 151
IMB-H610 Mic ro -ATX Mo th e rb o a rd B.1.1 S ys te m Re q u ire m e n t NOTE: The recovery CD can only be used with IEI products. The software will fail to run and a warning message will appear when used on non-IEI hardware. To create the system backup, the main storage device must be split into two partitions (three partitions for Linux).
PAGE 152
IMB-H610 Mic ro -ATX Mo th e rb o a rd NOTE: Specialized tools are required to change the partition size if the operating system is already installed. B.1.2 S u p p o rte d Op e ra tin g S ys te m The recovery CD is compatible with both Microsoft Windows and Linux operating system (OS). The supported OS versions are listed below.  Microsoft Windows o o o o o o  Windows XP (Service Pack 2 or 3 required) Windows Vista Windows 7 Windows CE 5.0 Windows CE 6.
PAGE 153
IMB-H610 Mic ro -ATX Mo th e rb o a rd NOTE: Installing unsupported OS versions may cause the recovery tool to fail. B.2 S e tu p P ro c e d u re fo r Win d ows Prior to using the recovery tool to backup or restore Windows system, a few setup procedures are required. S te p 1: Hardware and BIOS setup (see Section B.2.1) S te p 2: Create partitions (see Section B.2.2) S te p 3: Install operating system, drivers and system applications (see Section B.2.
PAGE 154
IMB-H610 Mic ro -ATX Mo th e rb o a rd S te p 4: Turn on the system. S te p 5: Press the key as soon as the system is turned on to enter the BIOS. S te p 6: Select the connected optical disk drive as the 1 boot device. (Boot  Boot st st Device Priority  1 Boot Device). S te p 7: Save changes and restart the computer. Continue to the next section for instructions on partitioning the internal storage. B.2.
PAGE 155
IMB-H610 Mic ro -ATX Mo th e rb o a rd S te p 3: The recovery tool setup menu is shown as below. Figure B-3: Recovery Tool Setup Menu S te p 4: Press <5> then . Figure B-4: Command Mode S te p 5: The command prompt window appears. Type the following commands (marked in red) to create two partitions. One is for the OS installation; the other is for saving recovery files and images which will be an invisible partition.
PAGE 156
IMB-H610 Mic ro -ATX Mo th e rb o a rd system32>format F: /fs:ntfs /q /v:Recovery /y system32>exit Figure B-5: Partition Creation Commands P a g e 141
PAGE 157
IMB-H610 Mic ro -ATX Mo th e rb o a rd NOTE: Use the following commands to check if the partitions were created successfully. S te p 6: Press any key to exit the recovery tool and automatically reboot the system. Please continue to the following procedure: Build-up Recovery Partition.Step0: B.2.3 In s ta ll Op e ra tin g S ys te m , Drive rs a n d Ap p lic a tio n s Install the operating system onto the unlabelled partition.
PAGE 158
IMB-H610 Mic ro -ATX Mo th e rb o a rd B.2.4 Bu ild -u p Re c o ve ry P a rtitio n S te p 1: Put the recover CD in the optical drive. S te p 2: Start the system. S te p 3: Boot the system from recovery CD. When prompted, press any key to boot from the recovery CD. It will take a while to launch the recovery tool. Please be patient! Figure B-6: Launching the Recovery Tool S te p 4: When the recovery tool setup menu appears, press <2> then .
PAGE 159
IMB-H610 Mic ro -ATX Mo th e rb o a rd S te p 5: The Symantec Ghost window appears and starts configuring the system to build-up a recovery partition. In this process, the partition which is created for recovery files in Section B.2.2 is hidden and the recovery tool is saved in this partition. Figure B-8: Build-up Recovery Partition S te p 6: After completing the system configuration, press any key in the following window to reboot the system.
PAGE 160
IMB-H610 Mic ro -ATX Mo th e rb o a rd B.2.5 Cre a te Fa c to ry De fa u lt Im a g e NOTE: Before creating the factory default image, please configure the system to a factory default environment, including driver and application installations. To create a factory default image, please follow the steps below. S te p 1: Turn on the system. When the following screen displays (Figure B-10), press the key to access the recovery tool.
PAGE 161
IMB-H610 Mic ro -ATX Mo th e rb o a rd Figure B-12: About Symantec Ghost Window S te p 4: Use mouse to navigate to the option shown below (Figure B-13). Figure B-13: Symantec Ghost Path S te p 5: P a g e 146 Select the local source drive (Drive 1) as shown in Figure B-14. Then click OK.
PAGE 162
IMB-H610 Mic ro -ATX Mo th e rb o a rd Figure B-14: Select a Local Source Drive S te p 6: Select a source partition (Part 1) from basic drive as shown in Figure B-15. Then click OK. Figure B-15: Select a Source Partition from Basic Drive S te p 7: Select 1.2: [Recovery] NTFS drive and enter a file name called iei (Figure B-16). Click Save. The factory default image will then be saved in the selected recovery drive and named IEI.GHO. WARNING: The file name of the factory default image must be iei.GHO.
PAGE 163
IMB-H610 Mic ro -ATX Mo th e rb o a rd Figure B-16: File Name to Copy Image to S te p 8: When the Compress Image screen in Figure B-17 prompts, click High to make the image file smaller.
PAGE 164
IMB-H610 Mic ro -ATX Mo th e rb o a rd S te p 9: The Proceed with partition image creation window appears, click Yes to continue. Figure B-18: Image Creation Confirmation S te p 10: The Symantec Ghost starts to create the factory default image (Figure B-19). Figure B-19: Image Creation Process S te p 11: When the image creation completes, a screen prompts as shown in Figure B-20. Click Continue and close the Ghost window to exit the program.
PAGE 165
IMB-H610 Mic ro -ATX Mo th e rb o a rd S te p 12: The recovery tool main menu window is shown as below. Press any key to reboot the system. Step0: Figure B-21: Press Any Key to Continue B.3 S e tu p P ro c e d u re fo r Lin u x The initial setup procedures for a Linux system are mostly the same with the procedure for Microsoft Windows. Please follow the steps below to setup the recovery tool for Linux OS. S te p 1: Hardware and BIOS setup. Refer to Section B.2.1.
PAGE 166
IMB-H610 Mic ro -ATX Mo th e rb o a rd NOTE: Please reserve enough space for partition 3 for saving recovery images. Figure B-22: Partitions for Linux S te p 3: Create a recovery partition. Insert the recovery CD into the optical disk drive. Follow Step 1 ~ Step 3 described in Section B.2.2. Then type the following commands (marked in red) to create a partition for recovery images.
PAGE 167
IMB-H610 Mic ro -ATX Mo th e rb o a rd recovery partition. After completing the system configuration, press any key to reboot the system. Eject the recovery CD. Figure B-23: System Configuration for Linux S te p 5: Access the recovery tool main menu by modifying the “menu.lst”. To first access the recovery tool main menu, the menu.lst must be modified. In Linux system, enter Administrator (root). When prompt appears, type: cd /boot/grub vi menu.lst Figure B-24: Access menu.
PAGE 168
IMB-H610 Mic ro -ATX Mo th e rb o a rd S te p 7: The recovery tool menu appears. (Figure B-25) Figure B-25: Recovery Tool Menu S te p 8: Create a factory default image. Follow Step 2 ~ Step 12 described in Section B.2.5 to create a factory default image. B.4 Re c o ve ry To o l Fu n c tio n s After completing the initial setup procedures as described above, users can access the recovery tool by pressing while booting up the system. The main menu of the recovery tool is shown below.
PAGE 169
IMB-H610 Mic ro -ATX Mo th e rb o a rd Figure B-26: Recovery Tool Main Menu The recovery tool has several functions including: 1. Factory Restore: Restore the factory default image (iei.GHO) created in Section B.2.5. 2. Backup system: Create a system backup image (iei_user.GHO) which will be saved in the hidden partition. 3. Restore your last backup: Restore the last system backup image 4. Manual: Enter the Symantec Ghost window to configure manually. 5.
PAGE 170
IMB-H610 Mic ro -ATX Mo th e rb o a rd B.4.1 Fa c to ry Re s to re To restore the factory default image, please follow the steps below. S te p 1: Type <1> and press in the main menu. S te p 2: The Symantec Ghost window appears and starts to restore the factory default. A factory default image called iei.GHO is created in the hidden Recovery partition. Figure B-27: Restore Factory Default S te p 3: The screen is shown as in Figure B-28 when completed. Press any key to reboot the system.
PAGE 171
IMB-H610 Mic ro -ATX Mo th e rb o a rd B.4.2 Ba c ku p S ys te m To backup the system, please follow the steps below. S te p 1: Type <2> and press in the main menu. S te p 2: The Symantec Ghost window appears and starts to backup the system. A backup image called iei_user.GHO is created in the hidden Recovery partition. Figure B-29: Backup System S te p 3: The screen is shown as in Figure B-30 when system backup is completed. Press any key to reboot the system.
PAGE 172
IMB-H610 Mic ro -ATX Mo th e rb o a rd B.4.3 Re s to re Yo u r La s t Ba c ku p To restore the last system backup, please follow the steps below. S te p 1: Type <3> and press in the main menu. S te p 2: The Symantec Ghost window appears and starts to restore the last backup image (iei_user.GHO). Figure B-31: Restore Backup S te p 3: The screen is shown as in Figure B-32 when backup recovery is completed. Press any key to reboot the system.
PAGE 173
IMB-H610 Mic ro -ATX Mo th e rb o a rd B.4.4 Ma n u a l To restore the last system backup, please follow the steps below. S te p 1: Type <4> and press in the main menu. S te p 2: The Symantec Ghost window appears. Use the Ghost program to backup or recover the system manually. Figure B-33: Symantec Ghost Window S te p 3: When backup or recovery is completed, press any key to reboot the system.
PAGE 174
IMB-H610 Mic ro -ATX Mo th e rb o a rd B.5 Oth e r In fo rm a tio n B.5.1 Us in g AHCI Mo d e o r ALi M5283 / VIA VT6421A Co n tro lle r When the system uses AHCI mode or some specific SATA controllers such as ALi M5283 or VIA VT6421A, the SATA RAID/AHCI driver must be installed before using one key recovery. Please follow the steps below to install the SATA RAID/AHCI driver. S te p 1: Copy the SATA RAID/AHCI driver to a floppy disk and insert the floppy disk into a USB floppy disk drive.
PAGE 175
IMB-H610 Mic ro -ATX Mo th e rb o a rd S te p 5: When the following window appears, press ~~to select “Specify Additional Device”. S te p 6: In the following window, select a SATA controller mode used in the system. Then press . The user can now start using the SATA HDD.~~
~~PAGE 176~~
IMB-H610 Mic ro -ATX Mo th e rb o a rd After pressing , the system will get into the recovery tool setup menu. S te p 7: Continue to follow the setup procedure from Step 4 in Section B.2.2 Create Partitions to finish the whole setup process. B.5.2 S ys te m Me m o ry Re q u ire m e n t To be able to access the recovery tool by pressing while booting up the system, please make sure to have enough system memory. The minimum memory requirement is listed below.
~~PAGE 177~~
~~IMB-H610 Mic ro -ATX Mo th e rb o a rd Ap p e n d ix C C Te rm in o lo g y P a g e 162~~
~~PAGE 178~~
IMB-H610 Mic ro -ATX Mo th e rb o a rd AC ’97 Audio Codec 97 (AC’97) refers to a codec standard developed by Intel® in 1997. ACP I Advanced Configuration and Power Interface (ACPI) is an OS-directed configuration, power management, and thermal management interface. AHCI Advanced Host Controller Interface (AHCI) is a SATA Host controller register-level interface. ATA The Advanced Technology Attachment (ATA) interface connects storage devices including hard disks and CD-ROM drives to a computer.
~~PAGE 179~~
IMB-H610 Mic ro -ATX Mo th e rb o a rd DIMM Dual Inline Memory Modules are a type of RAM that offer a 64-bit data bus and have separate electrical contacts on each side of the module. DIO The digital inputs and digital outputs are general control signals that control the on/off circuit of external devices or TTL devices. Data can be read or written to the selected address to enable the DIO functions.
~~PAGE 180~~
IMB-H610 Mic ro -ATX Mo th e rb o a rd LVDS Low-voltage differential signaling (LVDS) is a dual-wire, high-speed differential electrical signaling system commonly used to connect LCD displays to a computer. P OS T The Power-on Self Test (POST) is the pre-boot actions the system performs when the system is turned-on. RAM Random Access Memory (RAM) is volatile memory that loses data when power is lost. RAM has very fast data transfer rates compared to other storage like hard drives.
~~PAGE 181~~
~~IMB-H610 Mic ro -ATX Mo th e rb o a rd Ap p e n d ix D D Dig ita l I/O In te rfa c e P a g e 166~~
~~PAGE 182~~
IMB-H610 Mic ro -ATX Mo th e rb o a rd D.1 In tro d u c tio n The DIO connector on the IMB-H610 is interfaced to GPIO ports on the Super I/O chipset. The DIO has both 4-bit digital inputs and 4-bit digital outputs. The digital inputs and digital outputs are generally control signals that control the on/off circuit of external devices or TTL devices. Data can be read or written to the selected address to enable the DIO functions.
~~PAGE 183~~
IMB-H610 Mic ro -ATX Mo th e rb o a rd D.3.2 En a b le th e DIO Ou tpu t Fu n c tio n The BIOS interrupt call INT 15H controls the digital I/O. An assembly program to enable digital I/O output functions is listed below.
~~PAGE 184~~
~~IMB-H610 Mic ro -ATX Mo th e rb o a rd Ap p e n d ix E E Wa tc h d o g Tim e r P a g e 169~~
~~PAGE 185~~
IMB-H610 Mic ro -ATX Mo th e rb o a rd NOTE: The following discussion applies to DOS environment. Contact IEI support or visit the IEI website for specific drivers for other operating systems. The Watchdog Timer is provided to ensure that standalone systems can always recover from catastrophic conditions that cause the CPU to crash. This condition may have occurred by external EMIs or a software bug.
~~PAGE 186~~
~~IMB-H610 Mic ro -ATX Mo th e rb o a rd NOTE: When exiting a program it is necessary to disable the Watchdog Timer, otherwise the system resets.~~
~~PAGE 187~~
~~IMB-H610 Mic ro -ATX Mo th e rb o a rd Ap p e n d ix F F Co m p a tib ility P a g e 172~~
~~PAGE 188~~
IMB-H610 Mic ro -ATX Mo th e rb o a rd NOTE: The compatible items described here have been tested by the IEI R&D team and found to be compatible with the IMB-H610 F.1 Co m pa tib le Op e ra tin g S ys te m s The following operating systems have been successfully run on the IMB-H610.  Microsoft Windows XP  Microsoft Windows 7 Ultimate  Microsoft Windows Vista Ultimate  Linux Fedora 14 F.
~~PAGE 189~~
~~IMB-H610 Mic ro -ATX Mo th e rb o a rd Ap p e n d ix G G Ha za rd o u s Ma te ria ls Dis c lo s u re P a g e 174~~
~~PAGE 190~~
IMB-H610 Mic ro -ATX Mo th e rb o a rd G.1 Ha za rd o u s Ma te ria ls Dis c lo s u re Ta ble for IP B P ro d u c ts Ce rtifie d a s Ro HS Co m p lia n t Un d e r 2002/95/EC With o u t Me rc u ry The details provided in this appendix are to ensure that the product is compliant with the Peoples Republic of China (China) RoHS standards. The table below acknowledges the presences of small quantities of certain materials in the product, and is applicable to China RoHS only.
~~PAGE 191~~
IMB-H610 Mic ro -ATX Mo th e rb o a rd P a rt Na m e To xic o r Ha za rd o u s S u b s ta n c e s a n d Ele m e n ts Le a d Me rc u ry Ca d m iu m He xa va le n t P o lyb ro m in a te d P o lyb ro m in a te d (P b ) (Hg ) (Cd ) Ch ro m iu m Bip h e n yls Dip h e n yl (CR(VI)) (P BB) Eth e rs (P BDE) Ho u s in g X O O O O X Dis p la y X O O O O X P rin te d Circ u it X O O O O X X O O O O O X O O O O X Fa n As s e m b ly X O O O O X P o we r S u p p ly
~~PAGE 192~~
IMB-H610 Mic ro -ATX Mo th e rb o a rd 此附件旨在确保本产品符合中国 RoHS 标准。以下表格标示此产品中某有毒物质的含量符合中国 RoHS 标准规定的限量要求。本产品上会附有”环境友好使用期限”的标签，此期限是估算这些物质”不会有泄漏或突变”的年限。本产品可能包含有较短的环境友好使用期限的可替换元件，像是电池或灯管，这些元件将会单独标示出来。部件名称有毒有害物质或元素铅汞镉六价铬多溴联苯多溴二苯 (P b ) (Hg ) (Cd ) (CR(VI)) (P BB) 醚 (P BDE) 壳体 X O O O O X 显示 X O O O O X 印刷电路板 X O O O O X 金属螺帽 X O O O O O 电缆组装 X O O O O X 风扇组装 X O O O O X 电力供应组装 X O O O O X 电池 O O O O O O O: 表示该有毒有害物质在该部件所有物质材料中的含量均在 SJ