Instruction Manual

IMB-Q354 uATX Motherboard
Page 55
CN Location: See Figure 4-5
CN Pinouts: See
Table 4-6
The digital input/output connector is managed through a Super I/O chip. The DIO
connector pins are user programmable. To see details on how to program the DIO chip,
please refer to Appendix
C.
Figure 4-5: DIO Connector Location
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1 Ground 2 VCC
3 Output 3 4 Output 2
5 Output 1 6 Output 0
7 Input 3 8 Input 2
9 Input 1 10 Input 0
Table 4-6: DIO Connector Pinouts