Owner's manual

IMB-Q354 microATX Motherboard
Page 70
 Load Failsafe Defaults.
After having done one of the above, save the changes and exit the CMOS Setup menu.
The clear CMOS jumper settings are shown in
Table 4-2.
Clear CMOS Description
Short 1 - 2 Keep CMOS Setup Default
Short 2 - 3 Clear CMOS Setup
Table 4-2: Clear CMOS Jumper Settings
The location of the clear CMOS jumper is shown in Figure 4-9 below.
Figure 4-9: Clear CMOS Jumper
4.5.2 COM Port Pin 9 Setting Jumpers
Jumper Label:
J_COM_F2, J_COM_F3 and J_COM_F4
Jumper Type:
3-pin header
Jumper Settings:
See
Table 4-3
Jumper Location:
See
Figure 4-10
The COM Port Pin 9 Setting jumpers configure pin 9 on COM 2/COM 3/COM 4 as either a
+5V, +12V power source (see Section
4.5.3 to setup) or as a ring-in (RI) line. The COM
Port Pin 9 Setting jumpers selection options are shown in
Table 4-3.