Owner's manual

IMB-Q354 microATX Motherboard
Page 82
Figure 4-20: PS/2 Keyboard/Mouse Connector
4.8.5 Serial Device Connection
The IMB-Q354 has a single male DB-9 connector on the external peripheral interface
panel for a serial device. Follow the steps below to connect a serial device to the
IMB-Q354.
Step 1: Locate the DB-9 connector. The location of the DB-9 connector is shown in
Chapter 3.
Step 2: Insert the serial connector. Insert the DB-9 connector of a serial device into
the DB-9 connector on the external peripheral interface. See
Figure 4-21.