User Manual

IMB-Q354 microATX Motherboard
Page 132
6.6 Realtek HD Audio Driver (ALC662) Installation
To install the Realtek High Definition (HD) Audio driver, please follow the steps below.
NOTE:
This driver only needs to be installed if an external audio kit with a
Realtek ALC662 codec is installed.
6.6.1 BIOS Setup
Step 1: Enter the BIOS setup. To do this, reboot the system and press DEL during POST.
Step 2: Go to the Southbridge Configuration menu. Enable the High Definition Audio
controller.
Step 3: Press F10
to save the changes and exit the BIOS setup. The system reboots.Step 0:
6.6.2 Driver Installation
To install the audio driver please follow the steps below.
Step 1: Select AUDIO from the list in
Figure 6-2.
Step 2: Double-click the ALC662 folder.
Step 3: Locate the Setup.exe program icon and double-click it.
Step 4: The InstallShield Wizard starts (
Figure 6-32).
Figure 6-32: The InstallShield Wizard Starts
Step 5: The InstallShield Wizard is prepared to guide the user through the rest of the
process (
Figure 6-33).