User guide

ManualsBrandsIEI Integration ManualsHardwareIMB-Q670 v2.01

IMB-Q670 Micro-ATX Motherboard

Page i

IEI Technology Corp.

User Manual

MODEL:

IMB-Q670

Micro-ATX LGA1155 Motherboard for Intel® Core™ i7/i5 Quad

Core or i3 Dual Core CPU, Intel® Q67, DDR3, VGA/DVI-D/HDMI

Dual Intel PCIe GbE, Two USB 3.0 ports, Ten COM ports

Two SATA 6Gb/s ports, HD Audio and RoHS

Rev. 2.01 – July 10, 2012

Summary of content (179 pages)

PAGE 1
IMB-Q670 Micro-ATX Motherboard IEI Technology Corp. MODEL: IMB-Q670 Micro-ATX LGA1155 Motherboard for Intel® Core™ i7/i5 Quad Core or i3 Dual Core CPU, Intel® Q67, DDR3, VGA/DVI-D/HDMI Dual Intel PCIe GbE, Two USB 3.0 ports, Ten COM ports Two SATA 6Gb/s ports, HD Audio and RoHS User Manual Page i Rev. 2.
PAGE 2
IMB-Q670 Micro-ATX Motherboard Revision Date Version Changes July 10, 2012 2.01 Modified Appendix C: Digital I/O Interface Modified RS-422/485 connector pinouts November 24, 2011 2.00 Modified for R20 version August 16, 2011 1.02 Modified Section 4.3.1: AT/ATX Power Mode Jumper Added Section 4.6: Intel® AMT Setup Procedure Added Chapter 6: Software Drivers June 30, 2011 1.01 Modified Section 4.2.2: Socket LGA1155 Cooling Kit Installation warning and procedure April 28, 2011 Page ii 1.
PAGE 3
IMB-Q670 Micro-ATX Motherboard Copyright COPYRIGHT NOTICE The information in this document is subject to change without prior notice in order to improve reliability, design and function and does not represent a commitment on the part of the manufacturer. In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or documentation, even if advised of the possibility of such damages.
PAGE 4
IMB-Q670 Micro-ATX Motherboard Table of Contents 1 INTRODUCTION.......................................................................................................... 1 1.1 INTRODUCTION........................................................................................................... 2 1.2 BENEFITS ................................................................................................................... 2 1.3 FEATURES .....................................................................
PAGE 5
IMB-Q670 Micro-ATX Motherboard 3.2.11 PCH Fan Connector....................................................................................... 27 3.2.12 PCI Express Power ........................................................................................ 28 3.2.13 SATA 3Gb/s Drive Connector ........................................................................ 29 3.2.14 SATA 6Gb/s Drive Connector ........................................................................ 30 3.2.
PAGE 6
IMB-Q670 Micro-ATX Motherboard 4.5.1 Audio Connector .............................................................................................. 61 4.5.2 LAN Connection............................................................................................... 62 4.5.3 Parallel Device Connection............................................................................. 63 4.5.4 PS/2 Keyboard and Mouse Connection ........................................................... 64 4.5.
PAGE 7
IMB-Q670 Micro-ATX Motherboard 5.3.10 Serial Port Console Redirection .................................................................... 99 5.3.11 IEI Feature ................................................................................................... 100 5.4 CHIPSET ................................................................................................................. 101 5.4.1 Northbridge Configuration ............................................................................ 103 5.4.
PAGE 8
IMB-Q670 Micro-ATX Motherboard E.2 COMPATIBLE PROCESSORS ..................................................................................... 161 F HAZARDOUS MATERIALS DISCLOSURE........................................................ 162 F.1 HAZARDOUS MATERIALS DISCLOSURE TABLE FOR IPB PRODUCTS CERTIFIED AS ROHS COMPLIANT UNDER 2002/95/EC WITHOUT MERCURY .....................................
PAGE 9
IMB-Q670 Micro-ATX Motherboard List of Figures Figure 1-1: IMB-Q670......................................................................................................................2 Figure 1-2: Connectors ..................................................................................................................4 Figure 1-3: IMB-Q670 Dimensions (mm) ......................................................................................5 Figure 1-4: Data Flow Diagram...............................
PAGE 10
IMB-Q670 Micro-ATX Motherboard Figure 3-27: VGA Connector .......................................................................................................45 Figure 4-1: Intel LGA1155 Socket ...............................................................................................50 Figure 4-2: Remove Protective Cover.........................................................................................51 Figure 4-3: CPU Socket Load Plate.........................................................
PAGE 11
IMB-Q670 Micro-ATX Motherboard Figure 6-15: LAN Driver License Agreement .......................................................................... 127 Figure 6-16: LAN Driver Setup Options................................................................................... 128 Figure 6-17: LAN Driver Installation ........................................................................................ 128 Figure 6-18: LAN Driver Installation Complete............................................................
PAGE 12
IMB-Q670 Micro-ATX Motherboard List of Tables Table 1-1: IMB-Q670 Specifications..............................................................................................8 Table 2-1: Packing List.................................................................................................................12 Table 2-2: Optional Items.............................................................................................................13 Table 3-1: Peripheral Interface Connectors ................
PAGE 13
IMB-Q670 Micro-ATX Motherboard Table 3-28: HDMI Connector Pinouts .........................................................................................43 Table 3-29: Serial Port Connector Pinouts ................................................................................44 Table 3-30: VGA Connector Pinouts...........................................................................................45 Table 3-31: DVI Connector Pinouts.....................................................................
PAGE 14
IMB-Q670 Micro-ATX Motherboard BIOS Menus BIOS Menu 1: Main .......................................................................................................................73 BIOS Menu 2: Advanced ..............................................................................................................75 BIOS Menu 3: ACPI Configuration ..............................................................................................75 BIOS Menu 4: Trusted Computing ..................................
PAGE 15
IMB-Q670 Micro-ATX Motherboard Chapter 1 1 Introduction Page 1
PAGE 16
IMB-Q670 Micro-ATX Motherboard 1.1 Introduction Figure 1-1: IMB-Q670 The IMB-Q670 is a MicroATX motherboard. It accepts a Socket LGA1155 Intel® Core™ i3/i5/i7 processor and supports four 240-pin 1333/1066 MHz dual-channel DDR3 DIMM modules up to 32.0 GB maximum. The IMB-Q670 includes a VGA, HDMI, and DVI-D port. Expansion and I/O include one PCI slot, one PCIe x16 slot, one PCIe x4 slot, one PCIe x1 slot, two USB 3.0 ports on the rear panel by NEC D720200F1, two USB 2.0 on the rear panel, eight USB 2.
PAGE 17
IMB-Q670 Micro-ATX Motherboard 1.
PAGE 18
IMB-Q670 Micro-ATX Motherboard 1.4 Connectors The connectors on the IMB-Q670 are shown in the figure below.
PAGE 19
IMB-Q670 Micro-ATX Motherboard 1.5 Dimensions The main dimensions of the IMB-Q670 are shown in the diagram below.
PAGE 20
IMB-Q670 Micro-ATX Motherboard 1.6 Data Flow Figure 1-4 shows the data flow between the system chipset, the CPU and other 6 components installed on the motherboard.
PAGE 21
IMB-Q670 Micro-ATX Motherboard 1.7 Technical Specifications IMB-Q670 technical specifications are listed below. Specification/Model IMB-Q670 Form Factor Micro-ATX CPU Supported LGA1155 Socket Intel® Core™ i7/i5/i3 Quad/Dual core Northbridge Chipset Intel® Q67 Integrated Graphics Supports DirectX 10.1/OpenGL 3.0 Full MPEG2, VC1, AVC Decode Memory Four 240-pin 1333/1066 MHz Dual-Channel DDR3 SDRAM DIMMs support up to 32.
PAGE 22
IMB-Q670 Micro-ATX Motherboard Specification/Model IMB-Q670 Ethernet Two RJ-45 ports Keyboard/Mouse Dual PS/2 port TPM 2 x 10-pin pin header Serial Ports One external RS-232 serial port One RS-422/485 via internal box pin headers Eight RS-232 via internal box pin headers USB ports Two external USB 2.0 ports on rear IO Two external USB 3.0 ports on rear IO by NEC D720200F1 Eight internal USB 2.0 ports by pin header Serial ATA Four SATA 3Gb/s channels with 3.
PAGE 23
IMB-Q670 Micro-ATX Motherboard Chapter 2 2 Packing List Page 9
PAGE 24
IMB-Q670 Micro-ATX Motherboard 2.1 Anti-static Precautions WARNING! Static electricity can destroy certain electronics. Make sure to follow the ESD precautions to prevent damage to the product, and injury to the user. Make sure to adhere to the following guidelines: Wear an anti-static wristband: Wearing an anti-static wristband can prevent electrostatic discharge. Self-grounding: Touch a grounded conductor every few minutes to discharge any excess static buildup.
PAGE 25
IMB-Q670 Micro-ATX Motherboard 2.3 Packing List NOTE: If any of the components listed in the checklist below are missing, do not proceed with the installation. Contact the IEI reseller or vendor the IMB-Q670 was purchased from or contact an IEI sales representative directly by sending an email to sales@iei.com.tw.
PAGE 26
IMB-Q670 Micro-ATX Motherboard Quantity Item and Part Number 1 Quick Installation Guide Image Table 2-1: Packing List 2.
PAGE 27
IMB-Q670 Micro-ATX Motherboard Item and Part Number Image 20-Pin INFINEON TPM Module, S/W management tool (P/N: TPM-IN01-R10) Table 2-2: Optional Items Page 13
PAGE 28
IMB-Q670 Micro-ATX Motherboard Chapter 3 3 Connectors Page 14
PAGE 29
IMB-Q670 Micro-ATX Motherboard 3.1 Peripheral Interface Connectors This chapter details all the jumpers and connectors. 3.1.1 IMB-Q670 Layout The figures below show all the connectors and jumpers. Figure 3-1: Connectors and Jumpers 3.1.2 Peripheral Interface Connectors The table below lists all the connectors on the board.
PAGE 30
IMB-Q670 Micro-ATX Motherboard Connector Type Label CPU fan 4-pin wafer CPU_FAN CPU power 4-pin box header CPU12V1 Digital I/O 26-pin header DIO1 Front panel audio 10-pin header FP_AUDIO Front panel 14-pin header F_PANEL1 FW programming 8-pin header CN1 Infrared interface 5-pin header IR1 Memory card DIMM slot DIMM1, DIMM2 PCH fan connector 3-pin header PCH_FAN1 PCI-E power 4-pin molex PCIE_12V1 SATA 3Gb/s drive connector 16-pin SATA SATA34, SATA56 connector SATA 6Gb/s dr
PAGE 31
IMB-Q670 Micro-ATX Motherboard Connector Type Label Audio connector Audio jack AUDIO_JACK Keyboard/Mouse Dual PS/2 KBMS Ethernet and USB ports RJ-45, USB LAN1_USB LAN2_USB HDMI connector HDMI port HDMI Serial Port connector (COM1) 9-pin male DB-9 COM1 VGA and DVI connector 15-pin female, DVI+CRT 24-pin header Table 3-2: Rear Panel Connectors 3.2 Internal Peripheral Connectors The section describes all of the connectors on the IMB-Q670. 3.2.
PAGE 32
IMB-Q670 Micro-ATX Motherboard Figure 3-2: ATX/AT Power Connector Pinout Location Pin Description Pin Description 1 +3.3 V 13 +3.3V 2 +3.3 V 14 -12V 3 GND 15 GND 4 +5 V 16 IO_PS_ON- 5 GND 17 GND 6 +5 V 18 GND 7 GND 19 GND 8 PWRGD_PS 20 NC 9 +5 VSB 21 +5 V 10 +12 V 22 +5 V 11 +12 V 23 +5 V 12 +3.3 V 24 GND Table 3-3: ATX/AT Power Connector Pinouts 3.2.
PAGE 33
IMB-Q670 Micro-ATX Motherboard CN Location: See Figure 3-3 CN Pinouts: See Table 3-4 This is connected to the system battery. The battery provides power to the system clock to retain the time when power is turned off. Figure 3-3: Battery Connector Location Pin Description 1 NC 2 BAT+ 3 BAT-(GND) Table 3-4: Battery Connector Pinouts 3.2.
PAGE 34
IMB-Q670 Micro-ATX Motherboard The fan connector attaches to a CPU cooling fan. Figure 3-4: CPU Fan Connector Location PIN NO. DESCRIPTION 1 GND 2 +12 V 3 FANIN 4 FANOUT Table 3-5: CPU Fan Connector Pinouts 3.2.4 CPU Power Connector CN Label: CPU12V1 CN Type: 4-pin box header CN Location: See Figure 3-5 CN Pinouts: See Table 3-6 The CPU power input connector provides power to the CPU.
PAGE 35
IMB-Q670 Micro-ATX Motherboard Figure 3-5: CPU Power Connector Location PIN NO. DESCRIPTION 1 GND 2 GND 3 +12V 4 +12V Table 3-6: CPU Power Connector Pinouts 3.2.5 Digital I/O Connector CN Label: DIO1 CN Type: 26-pin header CN Location: See Figure 3-6 CN Pinouts: See Table 3-7 The digital I/O connector provides programmable input and output for external devices. The digital I/O provides 12-bit output and 12-bit input.
PAGE 36
IMB-Q670 Micro-ATX Motherboard Figure 3-6: Digital I/O Connector Location PIN NO. DESCRIPTION PIN NO. DESCRIPTION 1 GND 2 +5V 3 D_IN0 4 D_OUT0 5 D_IN1 6 D_OUT1 7 D_IN2 8 D_OUT2 9 D_IN3 10 D_OUT3 11 D_8IN0 12 D_8OUT0 13 D_8IN1 14 D_8OUT1 15 D_8IN2 16 D_8OUT2 17 D_8IN3 18 D_8OUT3 19 D_8IN4 20 D_8OUT4 21 D_8IN5 22 D_8OUT5 23 D_8IN6 24 D_8OUT6 25 D_8IN7 26 D_8OUT7 Table 3-7: Digital I/O Connector Pinouts 3.2.
PAGE 37
IMB-Q670 Micro-ATX Motherboard CN Pinouts: See Table 3-8 This connector connects to speakers, a microphone and an audio input. Figure 3-7: Front Panel Audio Connector Location Pin Description Pin Description 1 MIC_L 2 Audio GND 3 MIC_R 4 FP_AUO DETECT 5 Line_R 6 Audio GND 7 F_SENSE 8 NC 9 Line_L 10 Audio GND Table 3-8: Front Panel Audio Connector Pinouts 3.2.
PAGE 38
IMB-Q670 Micro-ATX Motherboard Figure 3-8: Front Panel Connector Location FUNCTION PIN DESCRIPTION FUNCTION PIN DESCRIPTION Power LED 1 Power LED Speaker 2 Beep Power 3 NC 4 NC 5 GND 6 NC 7 PWRBTSW# 8 PC Beep 9 GND 10 NC 11 HDDLED 12 EXTRST# 13 HDDLED# 14 GND Power Button HDD LED Reset Table 3-9: Front Panel Connector Pinouts 3.2.
PAGE 39
IMB-Q670 Micro-ATX Motherboard Figure 3-9: FW Programming Connector Location Pin Description Pin Description 1 +3.3V 2 TDO 3 TDI 4 NC 5 NC 6 TMS 7 GND 8 TCK Table 3-10: FW Programming Connector Pinouts 3.2.9 Infrared Interface Connector CN Label: IR1 CN Type: 5-pin header (1x5) CN Location: See Figure 3-10 CN Pinouts: See Table 3-11 The infrared connector attaches to an infrared receiver for use with remote controls.
PAGE 40
IMB-Q670 Micro-ATX Motherboard Figure 3-10: Infrared Connector Location Pin Description 1 +5V 2 NC 3 IR_RX 4 GND 5 IR_TX Table 3-11: Infrared Connector Pinouts 3.2.10 Memory Card Slot CN Label: DIMM1, DIMM2 CN Type: DDR3 DIMM slot CN Location: See Figure 3-11 6 The DIMM slots are for DIMM memory modules.
PAGE 41
IMB-Q670 Micro-ATX Motherboard Figure 3-11: Memory Card Slot Location 3.2.11 PCH Fan Connector CN Label: PCH_FAN CN Type: 3-pin header CN Location: See Figure 3-12 CN Pinouts: See Table 3-12 The PCH fan connector attaches to a PCH cooling fan.
PAGE 42
IMB-Q670 Micro-ATX Motherboard Figure 3-12: PCH Fan Connector Location Pin Description 1 FANIN 2 +12V 3 GND Table 3-12: PCH Fan Connector Pinouts 3.2.12 PCI Express Power CN Label: PCIE_12V1 CN Type: 4-pin Molex CN Location: See Figure 3-13 CN Pinouts: See Table 3-13 Provides extra power to the PCIe x16 card.
PAGE 43
IMB-Q670 Micro-ATX Motherboard Figure 3-13: PCIe Power Location Pin Description 1 +5 V 2 GND 3 GND 4 +12 V Table 3-13: PCIe Power Pinouts 3.2.13 SATA 3Gb/s Drive Connector CN Label: SATA34, SATA56 CN Type: 16-pin SATA connector CN Location: See Figure 3-14 CN Pinouts: See Table 3-14 The SATA drive connectors can be connected to SATA drives.
PAGE 44
IMB-Q670 Micro-ATX Motherboard Figure 3-14: SATA 3Gb/s Drive Connector Location Pin Description Pin Description 1 GND 9 SATA20_PTX_DRX_P3/5 2 SATA20_PTX_DRX_P2/4 10 SATA20_PTX_DRX_N3/5 3 SATA20_PTX_DRX_N2/4 11 GND 4 GND 12 SATA20_PRX_DTXN3/5 5 SATA20_PRX_DTX_N2/4 13 SATA20_PRX_DTX_P3/5 6 SATA20_PRX_DTX_P2/4 14 GND 7 GND 15 GND 8 GND 16 GND Table 3-14: SATA 3Gb/s Drive Connector Pinouts 3.2.
PAGE 45
IMB-Q670 Micro-ATX Motherboard Figure 3-15: SATA 6Gb/s Drive Connector Location Pin Description 1 GND 2 SATA30_PTX_DRX_P0/1 3 SATA30_PTX_DRX_N0/1 4 GND 5 SATA30_PRX_DTX_N0/1 6 SATA30_PRX_DTX_P0/1 7 GND Table 3-15: SATA 6Gb/s Drive Connector Pinouts 3.2.15 Serial Port Connector, RS-422/485 CN Label: COM4 CN Type: 4-pin box header (1x4) CN Location: See Figure 3-16 CN Pinouts: See Table 3-16 Used for RS-422/485 communications.
PAGE 46
IMB-Q670 Micro-ATX Motherboard Figure 3-16: Serial Port Connector Location PIN NO. DESCRIPTION PIN NO. DESCRIPTION 1 RXD422- 2 RXD422+ 3 TXD422+/TXD485+ 4 TXD422-/TXD485- Table 3-16: Serial Port Connector Pinouts 3.2.16 Serial Port Connectors, RS-232 CN Label: COM2_3_5_6, COM7-10 CN Type: 40-pin box header (2x20) CN Location: See Figure 3-17 CN Pinouts: See Table 3-17 Each of these connectors provides RS-232 connections.
PAGE 47
IMB-Q670 Micro-ATX Motherboard Figure 3-17: Serial Port Connector Location PIN NO. DESCRIPTION PIN NO.
PAGE 48
IMB-Q670 Micro-ATX Motherboard PIN NO. DESCRIPTION PIN NO. DESCRIPTION 37 NDTR6/10# 38 NRI6/10# 39 GND 40 GND Table 3-17: Serial Port Connector Pinouts 3.2.17 SMBus Connector CN Label: SMBUS_1 CN Type: 4-pin wafer CN Location: See Figure 3-18 CN Pinouts: See Table 3-18 The SMBus (System Management Bus) connector provides low-speed system management communications.
PAGE 49
IMB-Q670 Micro-ATX Motherboard PIN DESCRIPTION 4 GND Table 3-18: SMBus Connector Pinouts 3.2.18 SPDIF Connector CN Label: SPDIF CN Type: 5-pin header CN Location: See Figure 3-19 CN Pinouts: See Table 3-19 Use the SPDIF connector to connect digital audio devices to the system.
PAGE 50
IMB-Q670 Micro-ATX Motherboard 3.2.19 SPI Connector CN Label: SPI CN Type: 8-pin header CN Location: See Figure 3-20 CN Pinouts: See Table 3-20 The SPI connector is used to flash the BIOS. Figure 3-20: SPI Connector Location PIN NO. DESCRIPTION PIN NO. DESCRIPTION 1 SPI_VCC 2 GND 3 SPI_CS0#_CN 4 SPI_CLK0_CN 5 SPI_CSO#_CN 6 SPI_SI0_CN 7 NC 8 NC Table 3-20: SPI Connector Pinouts 3.2.
PAGE 51
IMB-Q670 Micro-ATX Motherboard CN Location: See Figure 3-21 CN Pinouts: See Table 3-21 The fan connector attaches to a cooling fan. Figure 3-21: System Fan Connector Location PIN NO. DESCRIPTION 1 NC 2 +12 V 3 GND Table 3-21: System Fan Connector Pinouts 3.2.21 TPM Connector CN Label: TPM CN Type: 20-pin header CN Location: See Figure 3-22 CN Pinouts: See Table 3-22 The TPM connector connects to a TPM module.
PAGE 52
IMB-Q670 Micro-ATX Motherboard Figure 3-22: TPM Connector Location PIN NO. DESCRIPTION PIN NO. DESCRIPTION 1 TPMCLK 2 GND 3 LPC_FRAME# 4 NC 5 BUF_PCIRST# 6 +5V 7 LPC_AD3 8 LPC_AD2 9 +3.3V 10 LPC_AD1 11 LPC_AD0 12 GND 13 SMBCLK_RESUME 14 SMBDATA_RESUME 15 +3.3V_STBY 16 SERIRQ 17 GND 18 +3.3V 19 LPCPD_N 20 LDRQ0# Table 3-22: TPM Connector Pinouts 3.2.
PAGE 53
IMB-Q670 Micro-ATX Motherboard The USB connectors connect to USB devices. Each pin header provides two USB ports. Figure 3-23: USB Connector Pinout Locations PIN NO. DESCRIPTION PIN NO.
PAGE 54
IMB-Q670 Micro-ATX Motherboard 3.3 External Peripheral Interface Connector Panel The figure below shows the external peripheral interface connector (EPIC) panel. The EPIC panel consists of the following: Figure 3-24: External Peripheral Interface Connector 3.3.1 Audio Connector CN Label: AUDIO_JACK CN Type: Audio jack CN Location: See Figure 3-24 The audio jacks connect to external audio devices. Line In port (Light Blue): Connects a CD-ROM, DVD player, or other audio devices.
PAGE 55
IMB-Q670 Micro-ATX Motherboard Figure 3-25: Audio Connector 3.3.2 Keyboard/Mouse Connector CN Label: KBMS CN Type: Dual PS/2 CN Location: See Figure 3-24 CN Pinouts: See Table 3-24 The PS/2 ports are for connecting a PS/2 mouse and a PS/2 keyboard.
PAGE 56
IMB-Q670 Micro-ATX Motherboard 3.3.3 Ethernet and USB Connector CN Label: LAN1_USB, LAN2_USB CN Type: RJ-45, USB CN Location: See Figure 3-24 CN Pinouts: See Table 3-25, Table 3-26 and Table 3-27 The LAN connector connects to a local network. PIN DESCRIPTION PIN DESCRIPTION 1 1.9V_LAN1/ 2 TRD1/2P0 1.05V_LAN2 3 TRD1/2N0 4 TRD1/2P1 5 TRD1/2N1 6 TRD1/2P2 7 TRD1/2N2 8 TRD1/2P3 9 TRD1/2N3 10 GND 11 L1/2_ 100# 12 L1/2 _1000# 13 L1/2_LINK_ACT# 14 3.
PAGE 57
IMB-Q670 Micro-ATX Motherboard PIN DESCRIPTION PIN DESCRIPTION 9 USB3P0_TXDP1_C 10 USB_3P0_VCC2 11 USB2P0_DM2_L 12 USB2P0_DP2_L 13 GND 14 USB3P0_RXDN2 15 USB3P0_RXDP2 16 GND 17 USB3P0_TXDN2_C 18 USB3P0_TXDP2_C Table 3-27: LAN2_USB Port Pinouts 3.3.4 HDMI Port Connector CN Label: HDMI CN Type: HDMI connector CN Location: See Figure 3-24 CN Pinouts: See Table 3-28 The HDMI port connects to an HDMI device. PIN NO. DESCRIPTION PIN NO.
PAGE 58
IMB-Q670 Micro-ATX Motherboard 3.3.5 Serial Port Connectors (COM1) CN Label: COM1 CN Type: DB-9 connector CN Location: See Figure 3-24 CN Pinouts: See Table 3-29 The serial port connects to a RS-232 serial communications device. PIN NO. DESCRIPTION PIN NO. DESCRIPTION 1 NDCD 6 NDSR 2 NRXD 7 NRTS 3 NTXD 8 NCTS 4 NDTR 9 NRI 5 GND Table 3-29: Serial Port Connector Pinouts Figure 3-26: Serial Port Connector Pinouts 3.3.
PAGE 59
IMB-Q670 Micro-ATX Motherboard PIN DESCRIPTION PIN DESCRIPTION 1 CRT_RED 2 CRT_GREEN 3 CRT_BLUE 4 NC 5 GND 6 GND 7 GND 8 GND 9 +5V CRT 10 CRT_PLUG# 11 NC 12 CRT_DDC_DATA 13 CRT_HSYNC 14 CRT_VSYNC 15 CRT_DDC_CLK Table 3-30: VGA Connector Pinouts Figure 3-27: VGA Connector The DVI connector connects to a monitor that supports DVI video input.
PAGE 60
IMB-Q670 Micro-ATX Motherboard PIN DESCRIPTION PIN DESCRIPTION 23 DVI_TMDS_C_CLK 24 DVI_TMDS_C_CLK# Table 3-31: DVI Connector Pinouts Page 46
PAGE 61
IMB-Q670 Micro-ATX Motherboard Chapter 4 4 Installation Page 47
PAGE 62
IMB-Q670 Micro-ATX Motherboard 4.1 Anti-static Precautions WARNING: Failure to take ESD precautions during the installation of the IMB-Q670 may result in permanent damage to the IMB-Q670 and severe injury to the user. Electrostatic discharge (ESD) can cause serious damage to electronic components, including the IMB-Q670. Dry climates are especially susceptible to ESD.
PAGE 63
IMB-Q670 Micro-ATX Motherboard WARNING: The installation instructions described in this manual should be carefully followed in order to prevent damage to the components and injury to the user. Before and during the installation please DO the following: Read the user manual: o The user manual provides a complete description of the IMB-Q670 installation instructions and configuration options. Wear an electrostatic discharge cuff (ESD): o Electronic components are easily damaged by ESD.
PAGE 64
IMB-Q670 Micro-ATX Motherboard 4.2.1 Socket LGA1155 CPU Installation NOTE: To enable Hyper-Threading, the CPU and chipset must both support it. WARNING: CPUs are expensive and sensitive components. When installing the CPU please be careful not to damage it in anyway. Make sure the CPU is installed properly and ensure the correct cooling kit is properly installed. The LGA1155 socket is shown in Figure 4-1. Figure 4-1: Intel LGA1155 Socket To install the CPU, follow the steps below.
PAGE 65
IMB-Q670 Micro-ATX Motherboard Step 1: Remove the protective cover. The black protective cover can be removed by pulling up on the tab labeled "Remove". See Figure 4-2. Figure 4-2: Remove Protective Cover Step 2: Open the socket. Disengage the load lever by pressing the lever down and slightly outward to clear the retention tab. Fully open the lever, then open the load plate. See Figure 4-3. Figure 4-3: CPU Socket Load Plate Step 3: Inspect the CPU socket.
PAGE 66
IMB-Q670 Micro-ATX Motherboard Step 4: Orientate the CPU properly. The contact array should be facing the CPU socket. Step 5: Correctly position the CPU. Match the Pin 1 mark with the cut edge on the CPU socket. Step 6: Align the CPU pins. Locate pin 1 and the two orientation notches on the CPU. Carefully match the two orientation notches on the CPU with the socket alignment keys. Step 7: Insert the CPU. Gently insert the CPU into the socket.
PAGE 67
IMB-Q670 Micro-ATX Motherboard 4.2.2 Socket LGA1155 Cooling Kit Installation WARNING: DO NOT attempt to install a push-pin cooling fan. The pre-installed support bracket prevents the board from bending and is ONLY compatible with captive screw type cooling fans. Figure 4-5: Cooling Kits (CF-1156A-RS and CF-1156B-RS) The cooling kit can be bought from IEI. The cooling kit has a heatsink and fan.
PAGE 68
IMB-Q670 Micro-ATX Motherboard Step 3: Mount the cooling kit. Gently place the cooling kit on top of the CPU. Make sure the four threaded screws on the corners of the cooling kit properly pass through the holes of the cooling kit bracket. Step 4: Secure the cooling kit by fastening the four retention screws of the cooling kit. Step 5: Connect the fan cable. Connect the cooling kit fan cable to the fan connector on the IMB-Q670. Carefully route the cable and avoid heat generating chips and fan blades.
PAGE 69
IMB-Q670 Micro-ATX Motherboard Step 4: Removing a DIMM. To remove a DIMM, push both handles outward. The memory module is ejected by a mechanism in the socket.Step 0: 4.3 Jumper Settings NOTE: A jumper is a metal bridge used to close an electrical circuit. It consists of two or three metal pins and a small metal clip (often protected by a plastic cover) that slides over the pins to connect them.
PAGE 70
IMB-Q670 Micro-ATX Motherboard Jumper Location: See Figure 4-7 The AT/ATX Power Select jumper specifies the systems power mode as AT or ATX. Setting Description Closed ATX power (Default) Open AT power Table 4-2: AT/ATX Power Mode Jumper Settings Figure 4-7: AT/ATX Power Mode Jumper Location 4.3.
PAGE 71
IMB-Q670 Micro-ATX Motherboard Setting Description 2-3 Clear BIOS Table 4-3: Clear BIOS Jumper Settings Figure 4-8: Clear BIOS Jumper Location 4.3.3 ME Debug Connector CN Label: J_FLASH1 CN Type: 3-pin header CN Location: See Figure 3-5 CN Pinouts: See Table 3-6 The ME Debug connector allows ME firmware overwrite protection.
PAGE 72
IMB-Q670 Micro-ATX Motherboard Figure 4-9: ME Debug Connector Location PIN NO. DESCRIPTION Short 1-2 Overwrite disable Short 2-3 Overwrite enable Table 4-4: ME Debug Connector Pinouts 4.3.4 USB Power Select Jumper Jumper Label: USB_PWR1 Jumper Type: 3-pin header Jumper Settings: See Table 4-5 Jumper Location: See Figure 4-10 The USB power connector allows the user to select the USB power setting.
PAGE 73
IMB-Q670 Micro-ATX Motherboard Figure 4-10: USB Power Select Jumper Location 4.3.5 Wake-on LAN Jumper CN Label: WOL_SEL1 CN Type: 3-pin header CN Location: See Figure 4-11 CN Pinouts: See Table 4-6 The Wake-on LAN connector allows the user to enable or disable the Wake-on LAN (WOL) function.
PAGE 74
IMB-Q670 Micro-ATX Motherboard PIN NO. DESCRIPTION Short 1-2 Wakeup Enable (Default) Short 2-3 Disable Table 4-6: Wake-on LAN Connector Pinouts 4.4 Internal Peripheral Device Connections This section outlines the installation of peripheral devices to the onboard connectors. 4.4.1 SATA Drive Connection The IMB-Q670 is shipped with four SATA drive cables. To connect the SATA drives to the connectors, please follow the steps below. Step 1: Locate the connectors.
PAGE 75
IMB-Q670 Micro-ATX Motherboard Step 3: Connect the cable to the SATA disk. Connect the connector on the other end of the cable to the connector at the back of the SATA drive. See Figure 4-13. Step 4: Connect the SATA power cable (optional). Connect the SATA power connector to the back of the SATA drive. See Figure 4-13. Step 0: Figure 4-13: SATA Power Drive Connection The SATA power cable can be bought from IEI. See Optional Items in Section 2.4. 4.
PAGE 76
IMB-Q670 Micro-ATX Motherboard Step 1: Identify the audio plugs. The plugs on your home theater system or speakers may not match the colors on the rear panel. Step 2: Plug the audio plugs into the audio jacks. Plug the audio plugs into the audio jacks. If the plugs on your speakers are different, an adapter will need to be used to plug them into the audio jacks. Figure 4-14: Audio Connector Step 3: Check audio clarity.
PAGE 77
IMB-Q670 Micro-ATX Motherboard Figure 4-15: LAN Connection Step 3: Insert the LAN cable RJ-45 connector. Once aligned, gently insert the LAN cable RJ-45 connector into the on-board RJ-45 connector. Step 0: 4.5.3 Parallel Device Connection The IMB-Q670 has a single female DB-25 connector on the external peripheral interface panel for parallel devices. Follow the steps below to connect a parallel device to the IMB-Q670. Step 1: Locate the DB-25 connector.
PAGE 78
IMB-Q670 Micro-ATX Motherboard Figure 4-16: Parallel Device Connector Step 3: Secure the connector. Secure the DB-25 connector to the external interface by tightening the two retention screws on either side of the connector. Step 0: 4.5.4 PS/2 Keyboard and Mouse Connection The IMB-Q670 has a dual PS/2 connector on the external peripheral interface panel. The dual PS/2 connector is used to connect to a keyboard and mouse to the system. Follow the steps below to connect a keyboard and mouse to the IMB-Q670.
PAGE 79
IMB-Q670 Micro-ATX Motherboard Figure 4-17: PS/2 Keyboard/Mouse Connector 4.5.5 Serial Device Connection The IMB-Q670 has a single female DB-9 connector on the external peripheral interface panel for a serial device. Follow the steps below to connect a serial device to the IMB-Q670. Step 1: Locate the DB-9 connector. The location of the DB-9 connector is shown in Chapter 3. Step 2: Insert the serial connector.
PAGE 80
IMB-Q670 Micro-ATX Motherboard Figure 4-18: Serial Device Connector Step 3: Secure the connector. Secure the serial device connector to the external interface by tightening the two retention screws on either side of the connector. Step 0: 4.5.6 USB Connection (Dual Connector) The external USB Series "A" receptacle connectors provide easier and quicker access to external USB devices. Follow the steps below to connect USB devices to the IMB-Q670. Step 1: Locate the USB Series "A" receptacle connectors.
PAGE 81
IMB-Q670 Micro-ATX Motherboard Figure 4-19: USB Connector 4.5.7 VGA Monitor Connection The IMB-Q670 has a single female DB-15 connector on the external peripheral interface panel. The DB-15 connector is connected to a CRT or VGA monitor. To connect a monitor to the IMB-Q670, please follow the instructions below. Step 1: Locate the female DB-15 connector. The location of the female DB-15 connector is shown in Chapter 3. Step 2: Align the VGA connector.
PAGE 82
IMB-Q670 Micro-ATX Motherboard Figure 4-20: VGA Connector Step 4: Secure the connector. Secure the DB-15 VGA connector from the VGA monitor to the external interface by tightening the two retention screws on either side of the connector. Step 0: 4.6 Intel® AMT Setup Procedure The IMB-Q670 is featured with the Intel® Active Management Technology (AMT). To enable the Intel® AMT function, follow the steps below. Step 1: Make sure the CHA_DIMM1 socket is installed with one DDR3 DIMM.
PAGE 83
IMB-Q670 Micro-ATX Motherboard process. Enter the Intel® current ME password as it requires (the Intel® default password is admin). NOTE: To change the password, enter a new password following the strong password rule (containing at least one upper case letter, one lower case letter, one digit and one special character, and be at least eight characters).
PAGE 84
IMB-Q670 Micro-ATX Motherboard Chapter 5 5 BIOS Page 70
PAGE 85
IMB-Q670 Micro-ATX Motherboard 5.1 Introduction The BIOS is programmed onto the BIOS chip. The BIOS setup program allows changes to certain system settings. This chapter outlines the options that can be changed. 5.1.1 Starting Setup The UEFI BIOS is activated when the computer is turned on. The setup program can be activated in one of two ways. 1. Press the F2 key as soon as the system is turned on or 2. Press the F2 key when the “Press F2 to enter SETUP” message appears on the screen. 0.
PAGE 86
IMB-Q670 Micro-ATX Motherboard Key Function Esc key Main Menu – Quit and not save changes into CMOS Status Page Setup Menu and Option Page Setup Menu -Exit current page and return to Main Menu F1 key General help, only for Status Page Setup Menu and Option Page Setup Menu F9 Load optimized defaults F10 key Save changes and Exit BIOS Table 5-1: BIOS Navigation Keys 5.1.
PAGE 87
IMB-Q670 Micro-ATX Motherboard 5.2 Main The Main BIOS menu (BIOS Menu 1) appears when the BIOS Setup program is entered. The Main menu gives an overview of the basic system information. Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc. Main Advanced Chipset Boot Security Save & Exit BIOS Information BIOS Vendor Core Version Compliency Project Version Build Date American Megatrends 4.6.4.0 0.03 UEFI 2.0 SA52AR10.ROM 08/05/2011 11:53:40 Set the Date.
PAGE 88
IMB-Q670 Micro-ATX Motherboard The System Overview field also has two user configurable fields: Î System Date [xx/xx/xx] Use the System Date option to set the system date. Manually enter the day, month and year. Î System Time [xx:xx:xx] Use the System Time option to set the system time. Manually enter the hours, minutes and seconds. 5.
PAGE 89
IMB-Q670 Micro-ATX Motherboard Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc. Main Advanced Chipset Boot Security Save & Exit > > > > > > > > > > > ACPI Settings Trusted Computing CPU Configuration SATA Configuration Intel TXT(LT) Configuration USB Configuration Super IO Configuration H/M Monitor Secondary Super IO Configuration Serial Port Console Redirection iEi Feature System ACPI Parameters ---------------------- ÅÆ: Select Screen ↑ ↓: Select Item Enter Select +/-: Change Opt.
PAGE 90
IMB-Q670 Micro-ATX Motherboard Î ACPI Sleep State [S1 (CPU Stop Clock)] Use the ACPI Sleep State option to specify the sleep state the system enters when it is not being used. Î Suspend Disabled Î S1 (CPU Stop DEFAULT The system enters S1(POS) sleep state. The system appears off. The CPU is stopped; RAM is Clock) refreshed; the system is running in a low power mode. Î S3 (Suspend The caches are flushed and the CPU is powered to off. Power to the RAM is maintained.
PAGE 91
IMB-Q670 Micro-ATX Motherboard Î TPM Support [Disable] Use the TPM Support option to configure support for the TPM. Î Disable DEFAULT TPM support is disabled. Î Enable TPM support is enabled. 5.3.3 CPU Configuration Use the CPU Configuration menu (BIOS Menu 5) to enter the CPU Information submenu or enable Intel Virtualization Technology. Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc.
PAGE 92
IMB-Q670 Micro-ATX Motherboard 5.3.3.1 CPU Information Use the CPU Information submenu (BIOS Menu 6) to view detailed CPU specifications and configure the CPU. Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc. Advanced CPU Configuration Intel(R) Core (TM) i5-2400 CPU @ 3.
PAGE 93
IMB-Q670 Micro-ATX Motherboard L2 Cache: Lists the amount of storage space on the L2 cache. L3 Cache: Lists the amount of storage space on the L3 cache. 5.3.4 SATA Configuration Use the SATA Configuration menu (BIOS Menu 7) to change and/or set the configuration of the SATA devices installed in the system. Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc. Advanced SATA Configuration (1) IDE Mode. (2) AHCI Mode. (3) RAID Mode.
PAGE 94
IMB-Q670 Micro-ATX Motherboard Î SATA Mode [AHCI Mode] Use the SATA Mode option to configure SATA devices as normal IDE devices. Î Î Disable Disables SATA devices. Î IDE Mode Configures SATA devices as normal IDE device. Î AHCI Mode Î RAID Mode DEFAULT Configures SATA devices as AHCI device. Configures SATA devices as RAID device. Staggered Spin-up [Disabled] Staggered Spin-up allows the system to power up one drive at a time to prevent excess power consumption.
PAGE 95
IMB-Q670 Micro-ATX Motherboard Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc. Advanced Intel Trusted Execution Technology Configuration Intel TXT support only can be enabled/disabled if SMX is enabled. VT and VT-d support must also be enabled prior to TXT. Secure Mode Extensons (SMX) Enabled Intel TXT(LT) Support [Disabled] --------------------ÅÆ: Select Screen ↑ ↓: Select Item Enter Select +/-: Change Opt.
PAGE 96
IMB-Q670 Micro-ATX Motherboard Î USB Devices The USB Devices Enabled field lists the USB devices that are enabled on the system Î USB Support [Enabled] Use the USB Support option to enable or disable USB support on the system. Î Î Disabled Î Enabled USB support disabled DEFAULT USB support enabled Legacy USB Support [Enabled] Use the Legacy USB Support BIOS option to enable USB mouse and USB keyboard support.
PAGE 97
IMB-Q670 Micro-ATX Motherboard 5.3.7 Super IO Configuration Use the Super IO Configuration menu (BIOS Menu 10) to set or change the configurations for the FDD controllers, parallel ports and serial ports. Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc.
PAGE 98
IMB-Q670 Micro-ATX Motherboard 5.3.7.1 Serial Port n Configuration Use the Serial Port n Configuration menu (BIOS Menu 11) to configure the serial port n. Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc. Advanced Serial Port n Configuration Serial Port Device Settings Enable or Disable Serial Port (COM) [Enabled] IO=3F8h; IRQ=4 --------------------ÅÆ: Select Screen ↑ ↓: Select Item Enter Select +/-: Change Opt.
PAGE 99
IMB-Q670 Micro-ATX Motherboard Î Î Î Î IO=3F8h; Serial Port I/O port address is 3F8h and the interrupt IRQ=3, 4 address is IRQ3,4 IO=2F8h; Serial Port I/O port address is 2F8h and the interrupt IRQ=3, 4 address is IRQ3,4 IO=2C0h; Serial Port I/O port address is 2C0h and the interrupt IRQ=10, 11 address is IRQ10, 11 IO=2C8h; Serial Port I/O port address is 2C8h and the interrupt IRQ=10, 11 address is IRQ10, 11 5.3.7.1.
PAGE 100
IMB-Q670 Micro-ATX Motherboard Î IO=2C8h; Serial Port I/O port address is 2C8h and the interrupt IRQ=10, 11 address is IRQ10, 11 5.3.7.1.3 Serial Port 3 Configuration Î Serial Port [Enabled] Use the Serial Port option to enable or disable the serial port. Î Î Disabled Î Enabled Disable the serial port DEFAULT Enable the serial port Change Settings [Auto] Use the Change Settings option to change the serial port IO port address and interrupt address.
PAGE 101
IMB-Q670 Micro-ATX Motherboard 5.3.7.1.4 Serial Port 4 Configuration Î Serial Port [Enabled] Use the Serial Port option to enable or disable the serial port. Î Î Disabled Î Enabled Disable the serial port DEFAULT Enable the serial port Change Settings [Auto] Use the Change Settings option to change the serial port IO port address and interrupt address. Î Auto DEFAULT The serial port IO port address and interrupt address are automatically detected.
PAGE 102
IMB-Q670 Micro-ATX Motherboard 5.3.7.1.5 Serial Port 5 Configuration Î Serial Port [Enabled] Use the Serial Port option to enable or disable the serial port. Î Î Disabled Î Enabled Disable the serial port DEFAULT Enable the serial port Change Settings [Auto] Use the Change Settings option to change the serial port IO port address and interrupt address. Î Auto DEFAULT The serial port IO port address and interrupt address are automatically detected.
PAGE 103
IMB-Q670 Micro-ATX Motherboard Î Î Disabled Î Enabled Disable the serial port DEFAULT Enable the serial port Change Settings [Auto] Use the Change Settings option to change the serial port IO port address and interrupt address. Î Auto DEFAULT The serial port IO port address and interrupt address are automatically detected.
PAGE 104
IMB-Q670 Micro-ATX Motherboard Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc. Advanced PC Health Status Smart FAN Configuration CPU Temperature SYS Temperature CPU FAN Speed SYS FAN Speed VCC3V Vcc V_core +1.05V VDDR VSB3V VBAT 5VSB :+50 C :+44 C :2189 RPM :N/A :+3.344 V :+4.080 V :+1.248 V :+1.064 V :+1.616 V :+3.424 V :+2.816 V :+4.968 V --------------------ÅÆ: Select Screen ↑ ↓: Select Item Enter Select +/-: Change Opt.
PAGE 105
IMB-Q670 Micro-ATX Motherboard o 5VSB 5.3.8.1 FAN 1 Configuration Use the FAN 1 Configuration submenu (BIOS Menu 13) to configure fan 1 temperature and speed settings. Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc.
PAGE 106
IMB-Q670 Micro-ATX Motherboard Î Target Temp. Sensor [CPU Temperature] Use the Target Temp. Sensor option to set the target CPU temperature. Î Î Î CPU DEFAULT Sets the target temperature sensor to the CPU Temperature temperature. System Sets the target temperature sensor to the System Temperature Temperature1 setting. Temperature Bound n Use the + or – key to change the fan Temperature Bound n value. Enter a decimal number between 0 and 127.
PAGE 107
IMB-Q670 Micro-ATX Motherboard Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc. Advanced PC Health Status SYS Smart Fan control Target Temp Sensor Temperature Bound 1 Temperature Bound 2 Temperature Bound 3 Temperature Bound 4 Segment 1 Speed (PWM) Segment 2 Speed (PWM) Segment 3 Speed (PWM) Segment 4 Speed (PWM) Segment 5 Speed (PWM) [Auto by Duty-Cycle] [CPU Temperature] 60 50 40 30 100 85 70 60 50 --------------------ÅÆ: Select Screen ↑ ↓: Select Item Enter Select +/-: Change Opt.
PAGE 108
IMB-Q670 Micro-ATX Motherboard Î Î Î System Sets the target temperature sensor to the System Temperature1 Temperature1 setting. System Sets the target temperature sensor to the System Temperature2 Temperature2 setting. Temperature Bound n Use the + or – key to change the fan Temperature Bound n value. Enter a decimal number between 0 and 127. Î Segment 1 Speed (PWM) Use the + or – key to change the fan Segment 1 Speed value in Pulse Width Modulation (PWM).
PAGE 109
IMB-Q670 Micro-ATX Motherboard 5.3.9.1 Serial Port 7 Configuration Î Serial Port [Enabled] Use the Serial Port option to enable or disable the serial port. Î Î Disabled Î Enabled Disable the serial port DEFAULT Enable the serial port Change Settings [Auto] Use the Change Settings option to change the serial port IO port address and interrupt address. Î Auto DEFAULT The serial port IO port address and interrupt address are automatically detected.
PAGE 110
IMB-Q670 Micro-ATX Motherboard Î Normal DEFAULT Enables the serial port to function in normal mode. Î Î Î IR Mode, Enables the serial port to function in IR mode, Pusle 1.6us, Full Duplex pulse 1.6 us at full duplex. IR Enables the serial port to function in IR mode, Mode, Pusle 1.6us, Half Duplex pulse 1.6 us at half duplex. IR Enables the serial port to function in IR mode, Mode, Pusle pulse 3/16 bit time at full duplex.
PAGE 111
IMB-Q670 Micro-ATX Motherboard Î Î Î Î IO=2C0h; Serial Port I/O port address is 2C0h and the interrupt IRQ=10, 11 address is IRQ10, 11 IO=2C8h; Serial Port I/O port address is 2C8h and the interrupt IRQ=10, 11 address is IRQ10, 11 IO=2B0h; Serial Port I/O port address is 2B0h and the interrupt IRQ=10, 11 address is IRQ10, 11 IO=2B8h; Serial Port I/O port address is 2B8h and the interrupt IRQ=10, 11 address is IRQ10, 11 5.3.9.
PAGE 112
IMB-Q670 Micro-ATX Motherboard Î Î IO=2B0h; Serial Port I/O port address is 2B0h and the interrupt IRQ=10, 11 address is IRQ10, 11 IO=2B8h; Serial Port I/O port address is 2B8h and the interrupt IRQ=10, 11 address is IRQ10, 11 5.3.9.4 Serial Port 10 Configuration Î Serial Port [Enabled] Use the Serial Port option to enable or disable the serial port.
PAGE 113
IMB-Q670 Micro-ATX Motherboard 5.3.10 Serial Port Console Redirection The Serial Port Console Redirection menu (BIOS Menu 16) allows the console redirection options to be configured. Console redirection allows users to maintain a system remotely by re-directing keyboard input and text output through the serial port. Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc.
PAGE 114
IMB-Q670 Micro-ATX Motherboard Î Î Disabled Î Enabled Disabled the console redirection function DEFAULT Enabled the console redirection function Terminal Type [VT-100+] Use the Terminal Type option to specify the remote terminal type.
PAGE 115
IMB-Q670 Micro-ATX Motherboard Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc. Advanced iEi Feature ⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯ Auto Recovery Function [Disabled] Auto Recovery Function Reboot and recover system automatically within 10 min, when OS crashes. Please install Auto Recovery API service before enabling this function. --------------------ÅÆ: Select Screen ↑ ↓: Select Item Enter Select +/-: Change Opt.
PAGE 116
IMB-Q670 Micro-ATX Motherboard WARNING! Setting the wrong values for the Chipset BIOS selections in the Chipset BIOS menu may cause the system to malfunction. Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc. Main Advanced Chipset Boot Security Save & Exit > > > > North Bridge South Bridge Integrated Graphics ME Subsystem North Bridge Parameters --------------------ÅÆ: Select Screen ↑ ↓: Select Item Enter Select +/-: Change Opt.
PAGE 117
IMB-Q670 Micro-ATX Motherboard 5.4.1 Northbridge Configuration Use the Northbridge Chipset Configuration menu (BIOS Menu 19) to configure the Northbridge chipset. Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc. Chipset Memory Information Total Memory Memory Memory Memory Memory 1024 MB (DDR3 1067) Slot0 Slot1 Slot2 Slot3 Select which graphics controller to use as the primary boot device.
PAGE 118
IMB-Q670 Micro-ATX Motherboard Î IGD Memory [64 M] Use the IGD Memory option to specify the amount of system memory that can be used by the Internal graphics device.
PAGE 119
IMB-Q670 Micro-ATX Motherboard Î 480 MB of memory used by internal graphics 480 M device Î 512 MB of memory used by internal graphics 512 M device Î PCI Express Port [Enabled] Use the PCI Express Port option to enable or disable the PCI Express port. Î Î Disabled Î Enabled Disables the PCI Express port. DEFAULT Enables the PCI Express port. VT-d [Disabled] Use the VT-d option to enable or disable VT-d support. Î Disabled Î Enabled DEFAULT Disables VT-d support. Enables VT-d support.
PAGE 120
IMB-Q670 Micro-ATX Motherboard Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc.
PAGE 121
IMB-Q670 Micro-ATX Motherboard Î Î Enabled DEFAULT The onboard GbE controller is enabled GbE PXE Boot [Disabled] Use the GbE PXE Boot option to enable or disable the boot option for GbE devices. Î Î Disabled Î Enabled DEFAULT Disables the GbE PXE Boot option Enables the GbE PXE Boot option Restore on AC Power Loss [Power Off] Use the Restore on AC Power Loss BIOS option to specify what state the system returns to if there is a sudden loss of power to the system.
PAGE 122
IMB-Q670 Micro-ATX Motherboard Î Resume on Ring [Enabled] Use the Resume on Ring option to enable or disable resuming from RI# signal. Î Î Disabled Î Enabled Disables Resume on Ring option DEFAULT Enables Resume on Ring option Resume on PS/2 [Enabled] Use the Resume on PS/2 option to enable or disable resuming from PS/2 activation.
PAGE 123
IMB-Q670 Micro-ATX Motherboard Î PCIe LAN Controller [Enabled] Use the PCIe LAN Controller option to enable or disable the PCI Express LAN controller. Î Î Disabled Î Enabled The onboard PCIe LAN controller is disabled DEFAULT The onboard PCIe LAN controller is ensabled PCIe LAN PXE Boot [Disabled] Use the PCIe LAN PXE Boot option to enable or disable the boot option for the PCIe LAN PXE.
PAGE 124
IMB-Q670 Micro-ATX Motherboard Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc. Advanced Intel IGD SWSCI OpRegion Configuration DVMT Mode Select DVMT Memory [DVMT Mode] [Maximum] IGD - Boot Type [AUTO] Select DVMT Mode used by Internal Graphics Device. If Fixed Mode selected, IGD Memory might need to be changed to a larger value, for IGD to have sufficient memory. --------------------ÅÆ: Select Screen ↑ ↓: Select Item Enter Select +/-: Change Opt.
PAGE 125
IMB-Q670 Micro-ATX Motherboard Î IGD - Boot Type [AUTO] Use the IGD - Boot Type option to select the display device used by the system when it boots. For dual display support, select “Auto.” Configuration options are listed below. AUTO CRT DVI HDMI DEFAULT 5.4.4 ME Subsystem Use the ME Subsystem menu (BIOS Menu 22) to configure the Intel® Management Engine (ME) configuration options. Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc.
PAGE 126
IMB-Q670 Micro-ATX Motherboard Î Enables user to enter MEBx setup Enter MEBx Setup Î Unconfigure AMT/ME [Disabled] Use the Unconfigure AMT/ME option to perform AMT/ME unconfigure without password operation. Î Disabled Î Enabled DEFAULT Not perform AMT/ME unconfigure To perform AMT/ME unconfigure 5.5 Boot Use the Boot menu (BIOS Menu 23) to configure system boot options. Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc.
PAGE 127
IMB-Q670 Micro-ATX Motherboard Î On DEFAULT Allows the Number Lock on the keyboard to be enabled automatically when the computer system boots up. This allows the immediate use of the 10-key numeric keypad located on the right side of the keyboard. To confirm this, the Number Lock LED light on the keyboard is lit. Î Does not enable the keyboard Number Lock Off automatically. To use the 10-keys on the keyboard, press the Number Lock key located on the upper left-hand corner of the 10-key pad.
PAGE 128
IMB-Q670 Micro-ATX Motherboard Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc. Main Advanced Chipset Boot Security Save & Exit Password Description Set Setup Administrator Password If ONLY the Administrator’s password is set, then this only limits access to Setup and is only asked for when entering Setup. If ONLY the User’s password is set, then this is a power on password and must be entered to boot or enter Setup. In Setup the User will have Administrator rights.
PAGE 129
IMB-Q670 Micro-ATX Motherboard Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc. Main Advanced Chipset Boot Security Save & Exit Save Changes and Reset Discard Changes and Reset Reset the system after saving the changes. Restore Defaults Save as User Defaults Restore User Defaults --------------------ÅÆ: Select Screen ↑ ↓: Select Item Enter Select +/-: Change Opt. F1: General Help F2: Previous Values F3: Optimized Defaults F4: Save & Exit ESC: Exit Version 2.11.1210.
PAGE 130
IMB-Q670 Micro-ATX Motherboard Chapter 6 6 Software Drivers Page 116
PAGE 131
IMB-Q670 Micro-ATX Motherboard 6.1 Available Software Drivers NOTE: The content of the CD may vary throughout the life cycle of the product and is subject to change without prior notice. Visit the IEI website or contact technical support for the latest updates. The following drivers can be installed on the system: Chipset Graphic LAN Audio USB 3.0 Intel® AMT o o Intel® Management Engine Components driver Intel® IT Director application Installation instructions are given below.
PAGE 132
IMB-Q670 Micro-ATX Motherboard Figure 6-1: Introduction Screen Step 3: Click IMB-Q670. Step 4: A new screen with a list of available drivers appears (Figure 6-2).
PAGE 133
IMB-Q670 Micro-ATX Motherboard Step 5: Install all of the necessary drivers in this menu. Step0: 6.3 Chipset Driver Installation To install the chipset driver, please do the following. Step 1: Access the driver list. (See Section 6.2) Step 2: Click “Chipset”. Step 3: Locate the setup file and double click on it. Step 4: The setup files are extracted as shown in Figure 6-3. Figure 6-3: Chipset Driver Screen Step 5: When the setup files are completely extracted the Welcome Screen in Figure 6-4 appears.
PAGE 134
IMB-Q670 Micro-ATX Motherboard Figure 6-4: Chipset Driver Welcome Screen Step 7: The license agreement in Figure 6-5 appears. Step 8: Read the License Agreement. Step 9: Click Yes to continue.
PAGE 135
IMB-Q670 Micro-ATX Motherboard Step 10: The Read Me file in Figure 6-6 appears. Step 11: Click Next to continue. Figure 6-6: Chipset Driver Read Me File Step 12: Setup Operations are performed as shown in Figure 6-7. Step 13: Once the Setup Operations are complete, click Next to continue.
PAGE 136
IMB-Q670 Micro-ATX Motherboard Figure 6-7: Chipset Driver Setup Operations Step 14: The Finish screen in Figure 6-8 appears. Step 15: Select “Yes, I want to restart this computer now” and click Finish.
PAGE 137
IMB-Q670 Micro-ATX Motherboard 6.4 Graphics Driver Installation To install the Graphics driver, please do the following. Step 1: Access the driver list. (See Section 6.2) Step 2: Click “VGA” and select the folder which corresponds to the operating system. Step 3: Double click the setup file. Step 4: The Welcome Screen in Figure 6-9 appears. Step 5: Click Next to continue. Figure 6-9: Graphics Driver Welcome Screen Step 6: The License Agreement in Figure 6-10 appears.
PAGE 138
IMB-Q670 Micro-ATX Motherboard Figure 6-10: Graphics Driver License Agreement Step 8: Setup Operations are performed as shown in Figure 6-11. Step 9: Once the Setup Operations are complete, click Next to continue.
PAGE 139
IMB-Q670 Micro-ATX Motherboard Step 10: The Finish screen in Figure 6-12 appears. Step 11: Select “Yes, I want to restart this computer now” and click Finish.Step 0: Figure 6-12: Graphics Driver Installation Finish Screen 6.5 LAN Driver Installation To install the LAN driver, please do the following. Step 1: Access the driver list. (See Section 6.2) Step 2: Click “LAN”. Step 3: Locate the Autorun file and double click it. Step 4: The Intel® Network Connection menu in Figure 6-13 appears.
PAGE 140
IMB-Q670 Micro-ATX Motherboard Figure 6-13: Intel® Network Connection Menu Step 6: The Welcome screen in Figure 6-14 appears. Figure 6-14: LAN Driver Welcome Screen Step 7: Click Next to continue. Step 8: The License Agreement in Figure 6-15 appears.
PAGE 141
IMB-Q670 Micro-ATX Motherboard Step 9: Accept the agreement by selecting “I accept the terms in the license agreement”. Step 10: Click Next to continue. Figure 6-15: LAN Driver License Agreement Step 11: The Setup Options screen in Figure 6-16 appears. Step 12: Select program features to install. Step 13: Click Next to continue.
PAGE 142
IMB-Q670 Micro-ATX Motherboard Figure 6-16: LAN Driver Setup Options Step 14: The Ready to Install the Program screen in Figure 6-17 appears. Step 15: Click Install to proceed with the installation. Figure 6-17: LAN Driver Installation Step 16: The program begins to install. Step 17: When the driver installation is complete, the screen in Figure 6-18 appears.
PAGE 143
IMB-Q670 Micro-ATX Motherboard Step 18: Click Finish to exit. Figure 6-18: LAN Driver Installation Complete 6.6 Audio Driver Installation To install the audio driver, please do the following. Step 1: Access the driver list. (See Section 6.2) Step 2: Click “Audio” and select the folder which corresponds to the operating system. Step 3: Double click the setup file. Step 4: The InstallShield Wizard starts to extracting files (Figure 6-19).
PAGE 144
IMB-Q670 Micro-ATX Motherboard Figure 6-19: Audio Driver – Extracting Files Step 5: The Audio Driver Welcome message in Figure 6-20 appears. Step 6: Click Yes to install the audio driver. Figure 6-20: Audio Driver Welcome Screen Step 7: The audio driver installation begins. See Figure 6-21. Figure 6-21: Audio Driver Installation Step 8: When the installation is complete, the screen in Figure 6-22 appears.
PAGE 145
IMB-Q670 Micro-ATX Motherboard Step 9: Select “Yes, I want to restart my computer now” and click OK. Step 0: Figure 6-22: Audio Driver Installation Complete 6.7 USB 3.0 Driver Installation To install the touch panel software driver, please follow the steps below. Step 1: Access the driver list. (See Section 6.2) Step 2: Click “USB 3.0”. Step 3: Locate the setup file and double click on it. Step 4: A Welcome Screen appears (Figure 6-23). Step 5: Click Next to continue.
PAGE 146
IMB-Q670 Micro-ATX Motherboard Figure 6-23: USB 3.0 Driver Welcome Screen Step 6: The License Agreement shown in Figure 6-24 appears. Step 7: Accept the agreement by selecting “I accept the terms in the license agreement”. Step 8: Click Next to continue.
PAGE 147
IMB-Q670 Micro-ATX Motherboard Figure 6-24: USB 3.0 Driver License Agreement Step 9: Browse for an install location or use the one suggested (Figure 6-25). Step 10: Click NEXT to continue. Figure 6-25: USB 3.0 Driver Choose Install Location Step 11: The Ready to Install the Program screen in Figure 6-26 appears.
PAGE 148
IMB-Q670 Micro-ATX Motherboard Step 12: Click Install to proceed with the installation. Figure 6-26: USB 3.0 Driver Installation Step 13: The Install screen appears and displays the progress of the installation. Step 14: When the installation is complete, click Finish to exit setup. (Figure 6-27). Figure 6-27: USB 3.
PAGE 149
IMB-Q670 Micro-ATX Motherboard 6.8 Intel® AMT Driver and Application 6.8.
PAGE 150
IMB-Q670 Micro-ATX Motherboard Figure 6-28: Intel® ME Driver Welcome Screen Step 7: The license agreement in Figure 6-29 appears. Step 8: Read the License Agreement. Step 9: Click Yes to continue.
PAGE 151
IMB-Q670 Micro-ATX Motherboard Figure 6-29: Intel® ME Driver License Agreement Step 10: The Read Me file in Figure 6-30 appears. Step 11: Click Next to continue.
PAGE 152
IMB-Q670 Micro-ATX Motherboard Step 12: Setup Operations are performed as shown in Figure 6-31. Step 13: Once the Setup Operations are complete, click Next to continue. Figure 6-31: Intel® ME Driver Setup Operations Step 14: The Finish screen in Figure 6-32 appears. Step 15: Select “Yes, I want to restart this computer now” and click Finish.
PAGE 153
IMB-Q670 Micro-ATX Motherboard Figure 6-32: Intel® ME Driver Installation Finish Screen 6.8.2 Intel® IT Director Application Installation Intel® IT Director is an application that helps address key IT security, data protection and network health concerns of small businesses. To install the Intel® IT Director application, please do the following. NOTE: For Windows XP system, please make sure to install the .net Framework 3.5 before installing the Intel® IT Director application. The .net Framework 3.
PAGE 154
IMB-Q670 Micro-ATX Motherboard Step 5: The Welcome Screen in Figure 6-33 appears. Step 6: Click Next to continue. Figure 6-33: IT Director Welcome Screen Step 7: The license agreement in Figure 6-34 appears. Step 8: Accept the agreement by selecting “I accept the terms in the license agreement”. Step 9: Click Next to continue.
PAGE 155
IMB-Q670 Micro-ATX Motherboard Figure 6-34: IT Director License Agreement Step 10: Continue to choose the installation type and the destination folder for the IT Director application. Step 11: The Ready to Install the Program screen in Figure 6-35 appears. Step 12: Click Install to proceed with the installation.
PAGE 156
IMB-Q670 Micro-ATX Motherboard Step 13: The program begins to install. Step 14: When the driver installation is complete, the screen in Figure 6-36 appears. Step 15: Click Next to configure the system for remote monitoring or Cancel to exit the program and configure the system later. Figure 6-36: IT Director Installation Complete Step 16: The Welcome Screen of the IT Director Configuration Tool in Figure 6-37 appears.
PAGE 157
IMB-Q670 Micro-ATX Motherboard Figure 6-37: IT Director Configuration Tool Welcome Screen NOTE: It is recommended to open the Intel® IT Director Getting Started Guide shown in Figure 6-37 to fully understand the configuration process. Step 17: Select whether this is the first computer you are creating a password for IT Director. (Figure 6-38).
PAGE 158
IMB-Q670 Micro-ATX Motherboard Figure 6-38: IT Director – Creating Password Step 18: Follow the instructions to create a new password or enter the password created previously. Step 19: When the configuration is complete, the screen in Figure 6-39 appears. Step 20: Click Finish to exit.
PAGE 159
IMB-Q670 Micro-ATX Motherboard Figure 6-39: IT Director Configuration Complete Step 0: NOTE: If the network connection doesn’t work after installing the Intel® IT Director in a Windows Vista system, please install the network adapter driver. The driver is located at \7-iAMT, iTPM Driver & Utility\AMT Hot Fix\V1.0C0206 of the driver CD. Follow the instruction in the Intel Website Message PDF file in the same folder to install the driver.
PAGE 160
IMB-Q670 Micro-ATX Motherboard Appendix A A BIOS Options Page 146
PAGE 161
IMB-Q670 Micro-ATX Motherboard Below is a list of BIOS configuration options in the BIOS chapter. System Overview .................................................................................................................73 Memory Information ............................................................................................................73 System Date [xx/xx/xx] ........................................................................................................
PAGE 162
IMB-Q670 Micro-ATX Motherboard Full Speed Count .................................................................................................................92 CPU Smart Fan control [Auto by Duty-Cycle]...................................................................93 Target Temp. Sensor [CPU Temperature] .........................................................................93 Temperature Bound n.......................................................................................................
PAGE 163
IMB-Q670 Micro-ATX Motherboard PCIe USB3.0 Controller [Enabled]................................................................................... 109 PCIe x8 Slot [Enabled]...................................................................................................... 109 DVMT Mode Select [DVMT Mode].................................................................................... 110 DVMT Memory [Maximum] .............................................................................................
PAGE 164
IMB-Q670 Micro-ATX Motherboard Appendix B B Terminology Page 150
PAGE 165
IMB-Q670 Micro-ATX Motherboard AC ’97 Audio Codec 97 (AC’97) refers to a codec standard developed by Intel® in 1997. ACPI Advanced Configuration and Power Interface (ACPI) is an OS-directed configuration, power management, and thermal management interface. AHCI Advanced Host Controller Interface (AHCI) is a SATA Host controller register-level interface. ATA The Advanced Technology Attachment (ATA) interface connects storage devices including hard disks and CD-ROM drives to a computer.
PAGE 166
IMB-Q670 Micro-ATX Motherboard DIMM Dual Inline Memory Modules are a type of RAM that offer a 64-bit data bus and have separate electrical contacts on each side of the module. DIO The digital inputs and digital outputs are general control signals that control the on/off circuit of external devices or TTL devices. Data can be read or written to the selected address to enable the DIO functions.
PAGE 167
IMB-Q670 Micro-ATX Motherboard LVDS Low-voltage differential signaling (LVDS) is a dual-wire, high-speed differential electrical signaling system commonly used to connect LCD displays to a computer. POST The Power-on Self Test (POST) is the pre-boot actions the system performs when the system is turned-on. RAM Random Access Memory (RAM) is volatile memory that loses data when power is lost. RAM has very fast data transfer rates compared to other storage like hard drives.
PAGE 168
IMB-Q670 Micro-ATX Motherboard Appendix C C Digital I/O Interface Page 154
PAGE 169
IMB-Q670 Micro-ATX Motherboard C.1 Introduction The DIO connector on the IMB-Q670 is interfaced to GPIO ports on the Super I/O chipset. The DIO has both 12-bit digital inputs and 12-bit digital outputs. The digital inputs and digital outputs are generally control signals that control the on/off circuit of external devices or TTL devices. Data can be read or written to the selected address to enable the DIO functions. NOTE: For further information, please refer to the datasheet for the Super I/O chipset.
PAGE 170
IMB-Q670 Micro-ATX Motherboard C.3 Assembly Language Samples C.3.1 Enable the DIO Input Function The BIOS interrupt call INT 15H controls the digital I/O. An assembly program to enable digital I/O input functions is listed below. MOV AX, 6F08H Sets the digital port as input INT 15H Initiates the INT 15H BIOS call C.3.2 Enable the DIO Output Function The BIOS interrupt call INT 15H controls the digital I/O. An assembly program to enable digital I/O output functions is listed below.
PAGE 171
IMB-Q670 Micro-ATX Motherboard Appendix D D Watchdog Timer Page 157
PAGE 172
IMB-Q670 Micro-ATX Motherboard NOTE: The following discussion applies to DOS environment. Contact IEI support or visit the IEI website for specific drivers for other operating systems. The Watchdog Timer is provided to ensure that standalone systems can always recover from catastrophic conditions that cause the CPU to crash. This condition may have occurred by external EMIs or a software bug.
PAGE 173
IMB-Q670 Micro-ATX Motherboard NOTE: When exiting a program it is necessary to disable the Watchdog Timer, otherwise the system resets.
PAGE 174
IMB-Q670 Micro-ATX Motherboard Appendix E E Compatibility Page 160
PAGE 175
IMB-Q670 Micro-ATX Motherboard NOTE: The compatible items described here have been tested by the IEI R&D team and found to be compatible with the IMB-Q670 E.1 Compatible Operating Systems The following operating systems have been successfully run on the IMB-Q670. Microsoft Windows XP Microsoft Windows 7 Ultimate Microsoft Windows Vista Ultimate Linux Fedora 14 E.
PAGE 176
IMB-Q670 Micro-ATX Motherboard Appendix F F Hazardous Materials Disclosure Page 162
PAGE 177
IMB-Q670 Micro-ATX Motherboard F.1 Hazardous Materials Disclosure Table for IPB Products Certified as RoHS Compliant Under 2002/95/EC Without Mercury The details provided in this appendix are to ensure that the product is compliant with the Peoples Republic of China (China) RoHS standards. The table below acknowledges the presences of small quantities of certain materials in the product, and is applicable to China RoHS only.
PAGE 178
IMB-Q670 Micro-ATX Motherboard Part Name Toxic or Hazardous Substances and Elements Lead Mercury Cadmium Hexavalent Polybrominated Polybrominated (Pb) (Hg) (Cd) Chromium Biphenyls Diphenyl (CR(VI)) (PBB) Ethers (PBDE) Housing X O O O O X Display X O O O O X Printed Circuit X O O O O X X O O O O O X O O O O X Fan Assembly X O O O O X Power Supply X O O O O X O O O O O O Board Metal Fasteners Cable Assembly Assemblies Battery O: This toxic
PAGE 179
IMB-Q670 Micro-ATX Motherboard 此附件旨在确保本产品符合中国 RoHS 标准。以下表格标示此产品中某有毒物质的含量符合中国 RoHS 标准规定的限量要求。本产品上会附有”环境友好使用期限”的标签，此期限是估算这些物质”不会有泄漏或突变”的年限。本产品可能包含有较短的环境友好使用期限的可替换元件，像是电池或灯管，这些元件将会单独标示出来。部件名称有毒有害物质或元素铅汞镉六价铬多溴联苯多溴二苯 (Pb) (Hg) (Cd) (CR(VI)) (PBB) 醚 (PBDE) 壳体 X O O O O X 显示 X O O O O X 印刷电路板 X O O O O X 金属螺帽 X O O O O O 电缆组装 X O O O O X 风扇组装 X O O O O X 电力供应组装 X O O O O X 电池 O O O O O O O: 表示该有毒有害物质在该部件所有物质材料中的含量均在 SJ/T11363-2006 标准