Instruction Manual

IMBA-9454 Motherboard
Page 99
5.7.1 PS/2 Keyboard/Mouse Connection
The IMBA-9454 has a dual PS/2 connector on the external peripheral interface panel. The
dual PS/2 connector is used to connect to a keyboard and mouse to the system. Follow
the steps below to connect a keyboard and mouse to the IMBA-9454.
Step 1: Locate the dual PS/2 connector. The location of the dual PS/2 connector is
shown in Chapter 3.
Step 2: Insert the keyboard/mouse connector. Insert a PS/2 keyboard or mouse
connector into the appropriate PS/2 connector on the external peripheral
interface connector. See Figure 5-14. Step 0:
Figure 5-14: PS/2 Keyboard/Mouse Connector