Instruction Manual

IMBA-9454 Motherboard
Page 101
5.7.3 RJ-45 Ethernet Connection
The IMBA-9454 has two RJ-45 Ethernet connectors on the external peripheral interface
panel for LAN communications. Follow the steps below to connect an RJ-45 Ethernet
connector to the IMBA-9454.
Step 1: Locate the RJ-45 connector. The location of the RJ-45 connector is shown in
Chapter 3.
Step 2: Insert an RJ-45 plug. Insert the RJ-45 plug of a LAN into the RJ-45 receptacle
on the external peripheral interface. See Figure 5-16. Step 0:
Figure 5-16: RJ-45 Ethernet Connector