Manual

ManualsBrandsIEI Integration ManualsHardwareIMBA-C2060 v2.01

IMBA-C2060 ATX Motherboard

Page i

User Manual

MODEL:

IMBA-C2060

TX LGA1155 Motherboard for Intel® Core™ i3 Quad/Dual Core

CPU, Intel® C206 Chipset, DDR3, VGA/DVI/HDMI,

Dual Intel® PCIe GbE, Intel® AMT 7.0 Support, Two USB 3.0

Ports, Five COM Ports, Two SATA 6Gb/s Ports and RoHS

Rev. 2.01 – 23 April, 2014

Summary of content (209 pages)

PAGE 1
IMBA-C2060 ATX Motherboard MODEL: IMBA-C2060 ATX LGA1155 Motherboard for Intel® Core™ i3 Quad/Dual Core CPU, Intel® C206 Chipset, DDR3, VGA/DVI/HDMI, Dual Intel® PCIe GbE, Intel® AMT 7.0 Support, Two USB 3.0 Ports, Five COM Ports, Two SATA 6Gb/s Ports and RoHS User Manual Page i Rev. 2.
PAGE 2
IMBA-C2060 ATX Motherboard Revision Date Version Changes 23 April, 2014 2.01 Modified Table 3-24: LAN Pinouts 9 December, 2013 2.00 Updated for R20 version 9 November, 2012 1.03 Added Appendix F: Intel® Matrix Storage Manager 9 September, 2011 1.02 Modified Section4.3.1: AT/ATX Power Select Jumper Added Section 4.6: Intel® AMT Setup Procedure Added Chapter 6: Software Drivers 30 June, 2011 1.01 Modified Section 4.2.
PAGE 3
IMBA-C2060 ATX Motherboard Copyright COPYRIGHT NOTICE The information in this document is subject to change without prior notice in order to improve reliability, design and function and does not represent a commitment on the part of the manufacturer. In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or documentation, even if advised of the possibility of such damages.
PAGE 4
IMBA-C2060 ATX Motherboard Table of Contents 1 INTRODUCTION.......................................................................................................... 1 1.1 INTRODUCTION........................................................................................................... 2 1.2 BENEFITS ................................................................................................................... 2 1.3 FEATURES .........................................................................
PAGE 5
IMBA-C2060 ATX Motherboard 3.2.11 Keyboard/Mouse Connector........................................................................... 28 3.2.12 Parallel Port Connector ................................................................................ 29 3.2.13 PCI Slots ........................................................................................................ 30 3.2.14 PCIe x4 Slots.................................................................................................. 31 3.2.
PAGE 6
IMBA-C2060 ATX Motherboard 4.5 EXTERNAL PERIPHERAL INTERFACE CONNECTION ................................................... 63 4.5.1 Audio Connector .............................................................................................. 63 4.5.2 DVI Display Device Connection...................................................................... 64 4.5.3 HDMI Connection............................................................................................ 65 4.5.4 LAN Connection...................
PAGE 7
IMBA-C2060 ATX Motherboard 5.4.1 North Bridge Configuration........................................................................... 102 5.4.2 South Bridge Configuration........................................................................... 104 5.4.3 Integrated Graphics ....................................................................................... 108 5.4.4 ME Subsystem .................................................................................................110 5.5 BOOT...............
PAGE 8
IMBA-C2060 ATX Motherboard B.4.3 Restore Your Last Backup.............................................................................. 171 B.4.4 Manual........................................................................................................... 172 B.5 OTHER INFORMATION ............................................................................................ 173 B.5.1 Using AHCI Mode or ALi M5283 / VIA VT6421A Controller....................... 173 B.5.2 System Memory Requirement ..........
PAGE 9
IMBA-C2060 ATX Motherboard List of Figures Figure 1-1: IMBA-C2060 .................................................................................................................2 Figure 1-2: Connectors ..................................................................................................................4 Figure 1-3: IMBA-C2060 Dimensions (mm)..................................................................................5 Figure 1-4: Data Flow Diagram........................................
PAGE 10
IMBA-C2060 ATX Motherboard Figure 3-27: External Peripheral Interface Connector ..............................................................43 Figure 3-28: Audio Connector .....................................................................................................44 Figure 3-29: Ethernet Connector.................................................................................................44 Figure 3-30: Serial Port Connector Pinouts.............................................................
PAGE 11
IMBA-C2060 ATX Motherboard Figure 6-11: Graphics Driver Setup Operations ..................................................................... 124 Figure 6-12: Graphics Driver Installation Finish Screen ....................................................... 124 Figure 6-13: Intel® Network Connection Menu....................................................................... 125 Figure 6-14: LAN Driver Welcome Screen ..............................................................................
PAGE 12
IMBA-C2060 ATX Motherboard Figure B-8: Build-up Recovery Partition ................................................................................. 158 Figure B-9: Press any key to continue .................................................................................... 158 Figure B-10: Press F3 to Boot into Recovery Mode............................................................... 159 Figure B-11: Recovery Tool Menu ....................................................................................
PAGE 13
IMBA-C2060 ATX Motherboard List of Tables Table 1-1: IMBA-C2060 Specifications .........................................................................................8 Table 2-1: Packing List.................................................................................................................12 Table 2-2: Optional Items.............................................................................................................13 Table 3-1: Peripheral Interface Connectors ......................
PAGE 14
IMBA-C2060 ATX Motherboard Table 3-28: PS/2 Connector Pinouts...........................................................................................46 Table 3-29: Serial Port Connector Pinouts ................................................................................47 Table 3-30: VGA Connector Pinouts...........................................................................................47 Table 3-31: DVI Connector Pinouts........................................................................
PAGE 15
IMBA-C2060 ATX Motherboard BIOS Menus BIOS Menu 1: Main .......................................................................................................................75 BIOS Menu 2: Advanced ..............................................................................................................77 BIOS Menu 3: ACPI Configuration ..............................................................................................77 BIOS Menu 4: TPM Configuration ......................................
PAGE 16
PAGE 17
IMBA-C2060 ATX Motherboard Chapter 1 1 Introduction Page 1
PAGE 18
IMBA-C2060 ATX Motherboard 1.1 Introduction Figure 1-1: IMBA-C2060 The IMBA-C2060 is an ATX motherboard. It accepts a Socket LGA1155 Intel® Xeon® or Core™ i3 processor with quad or dual core and supports four 240-pin 1333/1066 MHz dual-channel DDR3 DIMM modules up to 32.0 GB maximum. The IMBA-C2060 includes a VGA, HDMI, and DVI-D port. Expansion and I/O include three PCI card slots, one PCIe x16 (x16 or x8 mode) slot, one PCIe x16 (x8 mode) slot, two PCIe x4 card slots, two USB 3.
PAGE 19
IMBA-C2060 ATX Motherboard 1.
PAGE 20
IMBA-C2060 ATX Motherboard 1.4 Connectors The connectors on the IMBA-C2060 are shown in the figure below.
PAGE 21
IMBA-C2060 ATX Motherboard 1.5 Dimensions The main dimensions of the IMBA-C2060 are shown in the diagram below.
PAGE 22
IMBA-C2060 ATX Motherboard 1.6 Data Flow Figure 1-4 shows the data flow between the system chipset, the CPU and other 7 components installed on the motherboard.
PAGE 23
IMBA-C2060 ATX Motherboard 1.7 Technical Specifications IMBA-C2060 technical specifications are listed below. Specification/Model IMBA-C2060 Form Factor ATX CPU Supported LGA1155 Intel® Xeon® or Core™ i3 processor with quad/dual core Chipset Intel® C206 Integrated Graphics Supports DirectX 10.1/OpenGL 3.0 Full MPEG2, VC1, AVC Decode Memory Four 240-pin 1333/1066 MHz dual-channel DDR3 SDRAM DIMMs support (system max. 32.
PAGE 24
IMBA-C2060 ATX Motherboard Specification/Model IMBA-C2060 Ethernet Two RJ-45 GbE ports Keyboard/Mouse Dual PS/2 port One internal keyboard and mouse connector via 6-pin wafer TPM One via 20-pin header Serial Ports One external RS-232 serial port Four RS-232 via internal box headers One RS-422/485 via internal 4-pin wafer Parallel Port One parallel port via internal 26-pin box header USB ports Two external USB 3.0 ports on rear IO by ASMedia ASM1042 Two external USB 2.
PAGE 25
IMBA-C2060 ATX Motherboard Chapter 2 2 Packing List Page 9
PAGE 26
IMBA-C2060 ATX Motherboard 2.1 Anti-static Precautions WARNING! Static electricity can destroy certain electronics. Make sure to follow the ESD precautions to prevent damage to the product, and injury to the user. Make sure to adhere to the following guidelines: Wear an anti-static wristband: Wearing an anti-static wristband can prevent electrostatic discharge. Self-grounding: Touch a grounded conductor every few minutes to discharge any excess static buildup.
PAGE 27
IMBA-C2060 ATX Motherboard 2.3 Packing List NOTE: If any of the components listed in the checklist below are missing, do not proceed with the installation. Contact the IEI reseller or vendor the IMBA-C2060 was purchased from or contact an IEI sales representative directly by sending an email to sales@ieiworld.com.tw.
PAGE 28
IMBA-C2060 ATX Motherboard Quantity Item and Part Number 1 Quick Installation Guide Image Table 2-1: Packing List 2.
PAGE 29
IMBA-C2060 ATX Motherboard Item and Part Number Image LGA1155/LGA1156 cooler kit (95W) (P/N: CF-1156E-R11) 20-pin Infineon TPM module, S/W management tool, firmware v3.
PAGE 30
IMBA-C2060 ATX Motherboard Chapter 3 3 Connectors Page 14
PAGE 31
IMBA-C2060 ATX Motherboard 3.1 Peripheral Interface Connectors This chapter details all the jumpers and connectors. 3.1.1 IMBA-C2060 Layout The figures below show all the connectors and jumpers.
PAGE 32
IMBA-C2060 ATX Motherboard 3.1.2 Peripheral Interface Connectors The table below lists all the connectors on the board.
PAGE 33
IMBA-C2060 ATX Motherboard Connector Type Label Serial port, RS-422/485 4-pin wafer COM4 Serial port, RS-232 10-pin box header COM1, COM2, COM3, COM5 SMBus connector 4-pin wafer SMBUS_1 SPDIF connector 5-pin header SPDIF1 SPI ROM connector 8-pin header JSPI1 TPM connector 20-pin header TPM1 USB connectors 8-pin header USB1, USB2, USB3, USB4 Table 3-1: Peripheral Interface Connectors 3.1.
PAGE 34
IMBA-C2060 ATX Motherboard 3.2 Internal Peripheral Connectors The section describes all of the connectors on the IMBA-C2060. 3.2.1 ATX Power Connector CN Label: ATX1 CN Type: 24-pin ATX CN Location: See Figure 3-2 CN Pinouts: See Table 3-3 The ATX power connector connects to an ATX power supply. Figure 3-2: ATX Power Connector Pinout Location Pin Description Pin Description 1 +3.3V 13 +3.3V 2 +3.
PAGE 35
IMBA-C2060 ATX Motherboard Pin Description Pin Description 8 NC 20 NC 9 +5V 21 +5V 10 +12V 22 +5V 11 +12V 23 +5V 12 +3.3V 24 GND Table 3-3: ATX Power Connector Pinouts 3.2.2 Battery Connectors CAUTION: Risk of explosion if battery is replaced by an incorrect type. Only certified engineers should replace the on-board battery. Dispose of used batteries according to instructions and local regulations.
PAGE 36
IMBA-C2060 ATX Motherboard Figure 3-3: Battery Connector Locations Pin Description 1 GND 2 Battery+ Table 3-4: Battery Connector (BT2) Pinouts 3.2.3 CPU Power Connector CN Label: CPU12V1 CN Type: 4-pin Molex CN Location: See Figure 3-4 CN Pinouts: See Table 3-5 The CPU power input connector provides power to the CPU.
PAGE 37
IMBA-C2060 ATX Motherboard Figure 3-4: CPU Power Connector Location PIN NO. DESCRIPTION 1 GND 2 GND 3 +12V 4 +12V Table 3-5: CPU Power Connector Pinouts 3.2.4 DDR3 DIMM Slots CN Label: CHA_DIMM1, CHA_DIMM2, CHB_DIMM1, CHB_DIMM2 CN Type: DDR3 DIMM slot CN Location: See Figure 3-5 7 The DIMM slots are for DDR3 DIMM memory modules.
PAGE 38
IMBA-C2060 ATX Motherboard Figure 3-5: DDR3 DIMM Slot Locations 3.2.5 Digital I/O Connector CN Label: DIO1 CN Type: 10-pin header CN Location: See Figure 3-6 CN Pinouts: See Table 3-6 The digital I/O connector provides programmable input and output for external devices. The digital I/O provides 4-bit output and 4-bit input.
PAGE 39
IMBA-C2060 ATX Motherboard Figure 3-6: Digital I/O Connector Location PIN NO. DESCRIPTION PIN NO. DESCRIPTION 1 GND 2 VCC 3 Output 3 4 Output 2 5 Output 1 6 Output 0 7 Input 3 8 Input 2 9 Input 1 10 Input 0 Table 3-6: Digital I/O Connector Pinouts 3.2.6 Fan Connector (CPU) CN Label: CPU_FAN1 CN Type: 4-pin wafer CN Location: See Figure 3-7 CN Pinouts: See Table 3-7 The fan connector attaches to a CPU cooling fan.
PAGE 40
IMBA-C2060 ATX Motherboard Figure 3-7: CPU Fan Connector Location PIN NO. DESCRIPTION 1 GND 2 +12 V 3 FANIO1 4 PWM Table 3-7: CPU Fan Connector Pinouts 3.2.7 Fan Connector (System) CN Label: SYS_FAN1, SYS_FAN2 CN Type: 3-pin wafer CN Location: See Figure 3-8 CN Pinouts: See Table 3-8 The fan connector attaches to a cooling fan.
PAGE 41
IMBA-C2060 ATX Motherboard Figure 3-8: System Fan Connector Location PIN NO. DESCRIPTION 1 FANIO 2 +12 V (PWM) 3 GND Table 3-8: System Fan Connector Pinouts 3.2.8 Front Panel Audio Connector CN Label: FP_AUDIO1 CN Type: 10-pin header CN Location: See Figure 3-9 CN Pinouts: See Table 3-9 This connector connects to speakers, a microphone and an audio input.
PAGE 42
IMBA-C2060 ATX Motherboard Figure 3-9: Front Panel Audio Connector Location Pin Description Pin Description 1 LMIC2_L 2 AUD GND 3 LMIC2_R 4 PRESENCE# 5 LLINE2-R 6 MIC2-JD 7 F_SENSE 8 NC 9 LLINE2-L 10 LINE2-JD Table 3-9: Front Panel Audio Connector Pinouts 3.2.
PAGE 43
IMBA-C2060 ATX Motherboard Figure 3-10: Front Panel Connector Location FUNCTION PIN DESCRIPTION FUNCTION PIN DESCRIPTION Power LED 1 ACPILED Speaker 2 Beep Power 3 NC 4 NC 5 GND 6 NC 7 PWRBT_SW#_C 8 PC Beep 9 GND 10 NC 11 HDDLED 12 EXTRST- 13 HDDLED- 14 GND Power Button HDD LED Reset Table 3-10: Front Panel Connector Pinouts 3.2.
PAGE 44
IMBA-C2060 ATX Motherboard Figure 3-11: I2C Connector Location Pin Description 1 +5V_DUAL 2 PCH_GP38_PU 3 PCH_GP39_PU 4 GND Table 3-11: I2C Connector Pinouts 3.2.11 Keyboard/Mouse Connector CN Label: KB_MS1 CN Type: 6-pin wafer CN Location: See Figure 3-12 CN Pinouts: See Table 3-12 The keyboard/mouse connector connects to a PS/2 Y-cable that can be connected to a PS/2 keyboard and mouse.
PAGE 45
IMBA-C2060 ATX Motherboard Figure 3-12: Keyboard/Mouse Connector Location Pin Description 1 +5 V KB DATA 2 MS DATA 3 MS CLK 4 KB DATA 5 KB CLK 6 GROUND Table 3-12: Keyboard/Mouse Connector Pinouts 3.2.12 Parallel Port Connector CN Label: LPT1 CN Type: 26-pin box header CN Location: See Figure 3-13 CN Pinouts: See Table 3-13 The parallel port connector connects to a parallel port connector interface or some other parallel port device such as a printer.
PAGE 46
IMBA-C2060 ATX Motherboard Figure 3-13: Parallel Port Connector Location Pin Description Pin Description 1 RSTROBE# 2 RPD0 3 RPD1 4 RPD2 5 RPD3 6 RPD4 7 RPD5 8 RPD6 9 RPD7 10 SIO_ACK# 11 SIO_BUSY 12 SIO_PE 13 SIO_SLCT 14 SIO_AFD# 15 SIO_ERR# 16 SIO_INIT# 17 SIO_SLIN# 18 GND 19 GND 20 GND 21 GND 22 GND 23 GND 24 GND 25 GND 26 NC Table 3-13: Parallel Port Connector Pinouts 3.2.
PAGE 47
IMBA-C2060 ATX Motherboard The PCI slot enables a PCI expansion module to be connected to the board. Figure 3-14: PCI Slot Locations 3.2.14 PCIe x4 Slots CN Label: PCIEX4_1, PCIEX4_2 CN Type: PCIe x4 slot CN Location: See Figure 3-18 The PCIe x4 slot is for PCIe x4 expansion cards.
PAGE 48
IMBA-C2060 ATX Motherboard 3.2.15 PCIe x8 Slot CN Label: PCIEX8_1 CN Type: PCIe x16 slot CN Location: See Figure 3-18 The PCIe x8 slot provide PCIe x8 signal for PCIe expansion cards. Figure 3-16: PCIe x8 Slot Location 3.2.16 PCI Express x16/x8 Slot CN Label: PCIEX16_1 CN Type: PCIe x16 slot CN Location: See Figure 3-17 The PCIe x16 expansion card slot is for PCIe x16 or PCIe x8 expansion cards.
PAGE 49
IMBA-C2060 ATX Motherboard Figure 3-17: PCIe x16 Slot Location 3.2.17 SATA 3Gb/s Drive Connector CN Label: SATA34, SATA56 CN Type: 14-pin SATA connector CN Location: See Figure 3-18 CN Pinouts: See Table 3-14 The SATA drive connectors can be connected to SATA drives and support up to 3Gb/s data transfer rate.
PAGE 50
IMBA-C2060 ATX Motherboard Figure 3-18: SATA 3Gb/s Drive Connector Location Pin Description Pin Description 1 GND 8 GND 2 SATATXP_A 9 SATATXP_B 3 SATATXN_A 10 SATATXN_B 4 GND 11 GND 5 SATARXN_A 12 SATARXN_B 6 SATARXP_A 13 SATARXP_B 7 GND 14 GND Table 3-14: SATA 3Gb/s Drive Connector Pinouts 3.2.
PAGE 51
IMBA-C2060 ATX Motherboard Figure 3-19: SATA 6Gb/s Drive Connector Location Pin Description 1 GND 2 SATATXP 3 SATATXN 4 GND 5 SATARXN 6 SATARXP 7 GND Table 3-15: SATA 6Gb/s Drive Connector Pinouts 3.2.19 Serial Port Connector, RS-422/485 CN Label: COM4 CN Type: 4-pin wafer CN Location: See Figure 3-20 CN Pinouts: See Table 3-16 NOTE: These pins are shared with those on the main serial port. Use either the pins on the main connector, or on this connector, but not both.
PAGE 52
IMBA-C2060 ATX Motherboard This connector provides RS-422 or RS-485 communications. Figure 3-20: RS-422/485 Connector Location PIN NO. DESCRIPTION 1 RXD422- 2 RXD422+ 3 TXD422+/TXD485+ 4 TXD422-/TXD485- Table 3-16: RS-422/485Connector Pinouts Use the optional RS-422/485 cable to connect to a serial device. The pinouts of the D-sub 9 connector are listed below.
PAGE 53
IMBA-C2060 ATX Motherboard 3.2.20 Serial Port Connectors, RS-232 CN Label: COM1, COM2, COM3, COM5 CN Type: 10-pin box header CN Location: See Figure 3-21 CN Pinouts: See Table 3-18 Each of these connectors provides RS-232 connections. Figure 3-21: Serial Port Connector Location PIN NO. DESCRIPTION PIN NO. DESCRIPTION 1 -NDCD1 6 -NCTS1 2 -NDSR1 7 -NDTR1 3 NSIN1 8 -XRI1 4 -NRTS1 9 GND 5 NSOUT1 10 GND Table 3-18: Serial Port Connector Pinouts 3.2.
PAGE 54
IMBA-C2060 ATX Motherboard CN Pinouts: See Table 3-19 The SMBus (System Management Bus) connector provides low-speed system management communications. Figure 3-22: SMBus Connector Location Pin Description 1 +5V_DUAL 2 SMBCLK 3 SMBDATA 4 GND Table 3-19: SMBus Connector Pinouts 3.2.22 SPDIF Connector CN Label: SPDIF1 CN Type: 5-pin header CN Location: See Figure 3-23 CN Pinouts: See Table 3-20 Use the SPDIF connector to connect digital audio devices to the system.
PAGE 55
IMBA-C2060 ATX Motherboard Figure 3-23: SPDIF Connector Location PIN DESCRIPTION 1 +5V 2 NC 3 SPDIFOUT 4 GND 5 SPDIFIN Table 3-20: SPDIF Connector Pinouts 3.2.23 SPI ROM Connector CN Label: JSPI1 CN Type: 8-pin header CN Location: See Figure 3-8 CN Pinouts: See Table 3-8 The SPI connector is used to flash the BIOS.
PAGE 56
IMBA-C2060 ATX Motherboard Figure 3-24: SPI Connector Location PIN NO. DESCRIPTION PIN NO. DESCRIPTION 1 +3.3V 2 GND 3 SPI_CS0 4 SPI_CLK 5 SPI_SO0 6 SPI_SI 7 NC 8 NC Table 3-21: SPI Connector Pinouts 3.2.24 TPM Connector CN Label: TPM1 CN Type: 20-pin header CN Location: See Figure 3-8 CN Pinouts: See Table 3-8 The TPM connector connects to a TPM module.
PAGE 57
IMBA-C2060 ATX Motherboard Figure 3-25: TPM Connector Location PIN NO. DESCRIPTION PIN NO. DESCRIPTION 1 LCLK 2 GND2 3 LERAME# 4 KEY 5 LRESRT# 6 +5V 7 LAD3 8 LAD2 9 +3V 10 LAD1 11 LAD0 12 GND3 13 SCL 14 SDA 15 SB3V 16 SERIRQ 17 GND1 18 GLKRUN# 19 LPCPD# 20 LDRQ# Table 3-22: TPM Connector Pinouts 3.2.
PAGE 58
IMBA-C2060 ATX Motherboard Figure 3-26: USB Connector Pinout Locations PIN NO. DESCRIPTION PIN NO.
PAGE 59
IMBA-C2060 ATX Motherboard 3.3 External Peripheral Interface Connector Panel The figure below shows the external peripheral interface connector (EPIC) panel. The EPIC panel consists of the following: Figure 3-27: External Peripheral Interface Connector 3.3.1 Audio Connector CN Label: AUDIO_CV1 CN Type: Audio jack CN Location: See Figure 3-27 The audio jacks connect to external audio devices. Line In port (Light Blue): Connects a CD-ROM, DVD player, or other audio devices.
PAGE 60
IMBA-C2060 ATX Motherboard Figure 3-28: Audio Connector 3.3.2 Ethernet and USB Connector CN Label: LAN1_USB01, LAN2_USB23 CN Type: RJ-45, USB 2.0 and USB 3.0 connectors CN Location: See Figure 3-27 CN Pinouts: See Table 3-24 The LAN connector connects to a local network.
PAGE 61
IMBA-C2060 ATX Motherboard LED Description LED Description A on: linked B off: 10 Mb/s blinking: data is being sent/received green: 100 Mb/s orange: 1000 Mb/s Table 3-25: Connector LEDs The USB connector can be connected to a USB device. The USB 2.0 ports are labeled as USB01 and the USB 3.0 ports are labels as USB23. Please refer to Figure 3-27. PIN DESCRIPTION 1 5V 2 Data- 3 Data+ 4 GND Table 3-26: USB Port Pinouts 3.3.
PAGE 62
IMBA-C2060 ATX Motherboard PIN NO. DESCRIPTION PIN NO. DESCRIPTION 9 HDMI_DATA0# 21 HDMI_GND 10 HDMI_CLK 22 HDMI_GND 11 GND 23 HDMI_GND 12 HDMI_CLK# Table 3-27: HDMI Connector Pinouts 3.3.4 Keyboard/Mouse Connector CN Label: KB_MS2 CN Type: Dual PS/2 CN Location: See Figure 3-27 CN Pinouts: See Table 3-28 The PS/2 ports are for connecting a PS/2 mouse and a PS/2 keyboard.
PAGE 63
IMBA-C2060 ATX Motherboard PIN NO. DESCRIPTION PIN NO. DESCRIPTION 1 NDCD 6 NDSR 2 NRXD 7 NRTS 3 NTXD 8 NCTS 4 NDTR 9 NRI 5 GND Table 3-29: Serial Port Connector Pinouts Figure 3-30: Serial Port Connector Pinouts 3.3.6 VGA and DVI Connector CN Label: VIDEO1 CN Type: 15-pin Female, 24-pin header CN Location: See Figure 3-27 CN Pinouts: See Table 3-30 and Table 3-31 The VGA connector connects to a monitor that accepts a standard VGA input.
PAGE 64
IMBA-C2060 ATX Motherboard Figure 3-31: VGA Connector The DVI connector connects to a monitor that supports DVI video input.
PAGE 65
IMBA-C2060 ATX Motherboard Chapter 4 4 Installation Page 49
PAGE 66
IMBA-C2060 ATX Motherboard 4.1 Anti-static Precautions WARNING: Failure to take ESD precautions during the installation of the IMBA-C2060 may result in permanent damage to the IMBA-C2060 and severe injury to the user. Electrostatic discharge (ESD) can cause serious damage to electronic components, including the IMBA-C2060. Dry climates are especially susceptible to ESD.
PAGE 67
IMBA-C2060 ATX Motherboard WARNING: The installation instructions described in this manual should be carefully followed in order to prevent damage to the components and injury to the user. Before and during the installation please DO the following: Read the user manual: o The user manual provides a complete description of the IMBA-C2060 installation instructions and configuration options. Wear an electrostatic discharge cuff (ESD): o Electronic components are easily damaged by ESD.
PAGE 68
IMBA-C2060 ATX Motherboard 4.2.1 Socket LGA1155 CPU Installation WARNING: CPUs are expensive and sensitive components. When installing the CPU please be careful not to damage it in anyway. Make sure the CPU is installed properly and ensure the correct cooling kit is properly installed. DO NOT touch the pins at the bottom of the CPU. When handling the CPU, only hold it on the sides. To install the CPU, follow the steps below.
PAGE 69
IMBA-C2060 ATX Motherboard Figure 4-2: Remove Protective Cover Step 3: Inspect the CPU socket. Make sure there are no bent pins and make sure the socket contacts are free of foreign material. If any debris is found, remove it with compressed air. Step 4: Orientate the CPU properly. The contact array should be facing the CPU socket. Step 5: Correctly position the CPU. Match the Pin 1 mark with the cut edge on the CPU socket. Step 6: Align the CPU pins.
PAGE 70
IMBA-C2060 ATX Motherboard Figure 4-3: Insert the Socket LGA1155 CPU Step 8: Close the CPU socket. Close the load plate and pull the load lever back a little to have the load plate be able to secure to the knob. Engage the load lever by pushing it back to its original position (Figure 4-4). There will be some resistance, but will not require extreme pressure. Figure 4-4: Close the Socket LGA1155 Step 9: Connect the 12 V power to the board. Connect the 12 V power from the power supply to the board.
PAGE 71
IMBA-C2060 ATX Motherboard 4.2.2 Socket LGA1155 Cooling Kit Installation WARNING: DO NOT attempt to install a push-pin cooling fan. The pre-installed support bracket prevents the board from bending and is ONLY compatible with captive screw type cooling fans. Figure 4-5: Cooling Kits (CF-1156A-RS and CF-1156E-RS) The cooling kit can be bought from IEI. The cooling kit has a heatsink and fan.
PAGE 72
IMBA-C2060 ATX Motherboard Figure 4-6: Cooling Kit Support Bracket Step 2: Place the cooling kit onto the socket LGA1155 CPU. Make sure the CPU cable can be properly routed when the cooling kit is installed. Step 3: Mount the cooling kit. Gently place the cooling kit on top of the CPU. Make sure the four threaded screws on the corners of the cooling kit properly pass through the holes of the cooling kit bracket. Step 4: Secure the cooling kit by fastening the four retention screws of the cooling kit.
PAGE 73
IMBA-C2060 ATX Motherboard 4.2.3 DIMM Installation To install a DIMM, please follow the steps below and refer to Figure 4-7. Figure 4-7: DIMM Installation Step 1: Open the DIMM socket handles. Open the two handles outwards as far as they can. See Figure 4-7. Step 2: Align the DIMM with the socket. Align the DIMM so the notch on the memory lines up with the notch on the memory socket. See Figure 4-7. Step 3: Insert the DIMM. Once aligned, press down until the DIMM is properly seated.
PAGE 74
IMBA-C2060 ATX Motherboard 4.3 Jumper Settings NOTE: A jumper is a metal bridge used to close an electrical circuit. It consists of two or three metal pins and a small metal clip (often protected by a plastic cover) that slides over the pins to connect them. To CLOSE/SHORT a jumper means connecting the pins of the jumper with the plastic clip and to OPEN a jumper means removing the plastic clip from a jumper. The hardware jumpers must be set before installation. Jumpers are shown in Table 4-1.
PAGE 75
IMBA-C2060 ATX Motherboard Setting Description Closed ATX power (Default) Open AT power Table 4-2: AT/ATX Power Mode Jumper Settings Figure 4-8: AT/ATX Power Mode Jumper Location 4.3.2 Clear CMOS Jumper Jumper Label: J_CMOS1 Jumper Type: 3-pin header Jumper Settings: See Table 4-3 Jumper Location: See Figure 4-9 To reset the BIOS, move the jumper to the "Clear BIOS" position for 3 seconds or more, and then move back to the default position.
PAGE 76
IMBA-C2060 ATX Motherboard Figure 4-9: Clear BIOS Jumper Location 4.3.3 Wake-on LAN Jumper CN Label: WOL_SEL1 CN Type: 3-pin header CN Location: See Figure 4-10 CN Pinouts: See Table 4-4 The Wake-on LAN connector allows the user to enable or disable the Wake-on LAN (WOL) function. PIN NO.
PAGE 77
IMBA-C2060 ATX Motherboard Figure 4-10: Wake-on LAN Connector Pinout Locations 4.4 Internal Peripheral Device Connections This section outlines the installation of peripheral devices to the onboard connectors. 4.4.1 SATA Drive Connection The IMBA-C2060 is shipped with four SATA drive cables. To connect the SATA drives to the connectors, please follow the steps below. Step 1: Locate the connectors. The locations of the SATA drive connectors are shown in Chapter 3. Step 2: Insert the cable connector.
PAGE 78
IMBA-C2060 ATX Motherboard Figure 4-11: SATA Drive Cable Connection Step 3: Connect the cable to the SATA disk. Connect the connector on the other end of the cable to the connector at the back of the SATA drive. See Figure 4-12. Step 4: Connect the SATA power cable (optional). Connect the SATA power connector to the back of the SATA drive. See Figure 4-12.
PAGE 79
IMBA-C2060 ATX Motherboard The SATA power cable can be bought from IEI. See Optional Items in Section 2.4. 4.5 External Peripheral Interface Connection This section describes connecting devices to the external connectors on the IMBA-C2060. 4.5.1 Audio Connector The audio jacks on the external audio connector enable the IMBA-C2060 to be connected to a stereo sound setup. Each jack supports both input and output.
PAGE 80
IMBA-C2060 ATX Motherboard 4.5.2 DVI Display Device Connection The IMBA-C2060 has a single female DVI-I connector on the external peripheral interface panel. The DVI-I connector is connected to a digital display device. To connect a digital display device to the IMBA-C2060, please follow the instructions below. Step 1: Locate the DVI-I connector. The location of the DVI-I connector is shown in another chapter. Step 2: Align the DVI-I connector.
PAGE 81
IMBA-C2060 ATX Motherboard 4.5.3 HDMI Connection The HDMI connector transmits a digital signal to compatible HDMI display devices such as a TV or computer screen. To connect the HDMI cable to the IMBA-C2060, follow the steps below. Step 1: Locate the HDMI connector. The location is shown in a previous section. Step 2: Align the connector. Align the HDMI connector with the HDMI port. Make sure the orientation of the connector is correct Step 3: Insert the HDMI connector. Gently insert the HDMI connector.
PAGE 82
IMBA-C2060 ATX Motherboard 4.5.4 LAN Connection There are two external RJ-45 LAN connectors. The RJ-45 connectors enable connection to an external network. To connect a LAN cable with an RJ-45 connector, please follow the instructions below. Step 1: Locate the RJ-45 connectors. The locations of the LAN connectors are shown in Chapter 3. Step 2: Align the connectors. Align the RJ-45 connector on the LAN cable with one of the RJ-45 connectors on the IMBA-C2060. See Figure 4-16.
PAGE 83
IMBA-C2060 ATX Motherboard Step 1: Locate the dual PS/2 connector. The location of the dual PS/2 connector is shown in Chapter 3. Step 2: Insert the keyboard/mouse connector. Insert a PS/2 keyboard or mouse connector into the appropriate PS/2 connector on the external peripheral interface connector. See Figure 4-17. Figure 4-17: PS/2 Keyboard/Mouse Connector 4.5.6 Serial Device Connection The IMBA-C2060 has a single male D-sub 9 connector on the external peripheral interface panel for a serial device.
PAGE 84
IMBA-C2060 ATX Motherboard Figure 4-18: Serial Device Connector Step 3: Secure the connector. Secure the serial device connector to the external interface by tightening the two retention screws on either side of the connector. Step 0: 4.5.7 USB Connection (Dual Connector) The external USB Series "A" receptacle connectors provide easier and quicker access to external USB devices. Follow the steps below to connect USB devices to the IMBA-C2060. Step 1: Locate the USB Series "A" receptacle connectors.
PAGE 85
IMBA-C2060 ATX Motherboard Figure 4-19: USB Connector 4.5.8 VGA Monitor Connection The IMBA-C2060 has a single female D-sub 15 connector on the external peripheral interface panel. The D-sub 15 connector is connected to a CRT or VGA monitor. To connect a monitor to the IMBA-C2060, please follow the instructions below. Step 1: Locate the female D-sub 15 connector. The location of the female D-sub 15 connector is shown in Chapter 3. Step 2: Align the VGA connector.
PAGE 86
IMBA-C2060 ATX Motherboard Figure 4-20: VGA Connector Step 4: Secure the connector. Secure the D-sub 15 VGA connector from the VGA monitor to the external interface by tightening the two retention screws on either side of the connector. Step 0: 4.6 Intel® AMT Setup Procedure The IMBA-C2060 is featured with the Intel® Active Management Technology (AMT). To enable the Intel® AMT function, follow the steps below. Step 1: Make sure the CHA_DIMM1 socket is installed with one DDR3 DIMM.
PAGE 87
IMBA-C2060 ATX Motherboard process. Enter the Intel® current ME password as it requires (the Intel® default password is admin). NOTE: To change the password, enter a new password following the strong password rule (containing at least one upper case letter, one lower case letter, one digit and one special character, and be at least eight characters).
PAGE 88
IMBA-C2060 ATX Motherboard Chapter 5 5 BIOS Page 72
PAGE 89
IMBA-C2060 ATX Motherboard 5.1 Introduction The BIOS is programmed onto the BIOS chip. The BIOS setup program allows changes to certain system settings. This chapter outlines the options that can be changed. NOTE: Some of the BIOS options may vary throughout the life cycle of the product and are subject to change without prior notice. 5.1.1 Starting Setup The UEFI BIOS is activated when the computer is turned on. The setup program can be activated in one of two ways. 1.
PAGE 90
IMBA-C2060 ATX Motherboard Key Function + Increase the numeric value or make changes - Decrease the numeric value or make changes Page Up key Increase the numeric value or make changes Page Dn key Decrease the numeric value or make changes Esc key Main Menu – Quit and not save changes into CMOS Status Page Setup Menu and Option Page Setup Menu -Exit current page and return to Main Menu F1 General help, only for Status Page Setup Menu and Option Page Setup Menu F2 Previous values F3 Load opt
PAGE 91
IMBA-C2060 ATX Motherboard Security – Sets User and Supervisor Passwords. Save & Exit – Selects exit options and loads default settings The following sections completely describe the configuration options found in the menu items at the top of the BIOS screen and listed above. 5.2 Main The Main BIOS menu (BIOS Menu 1) appears when the BIOS Setup program is entered. The Main menu gives an overview of the basic system information. Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc.
PAGE 92
IMBA-C2060 ATX Motherboard Î Memory Information The Memory Information lists a brief summary of the on-board memory. The fields in Memory Information cannot be changed. Total Memory: Displays the auto-detected system memory size and type. The System Overview field also has two user configurable fields: Î System Date [xx/xx/xx] Use the System Date option to set the system date. Manually enter the day, month and year. Î System Time [xx:xx:xx] Use the System Time option to set the system time.
PAGE 93
IMBA-C2060 ATX Motherboard Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc. Main Advanced Chipset Boot Security Save & Exit > > > > > > > > > ACPI Settings Trusted Computing CPU Configuration SATA Configuration Intel TXT(LT) Configuration USB Configuration Super IO Configuration H/M Monitor Serial Port Console Redirection System ACPI Parameters ---------------------- ÅÆ: Select Screen ↑ ↓: Select Item Enter Select + - Change Opt.
PAGE 94
IMBA-C2060 ATX Motherboard Î ACPI Sleep State [S1 (CPU Stop Clock)] Use the ACPI Sleep State option to specify the sleep state the system enters when it is not being used. Î Suspend Disabled Î S1 (CPU Stop DEFAULT The system enters S1(POS) sleep state. The system appears off. The CPU is stopped; RAM is Clock) refreshed; the system is running in a low power mode. Î S3 (Suspend The caches are flushed and the CPU is powered to off. Power to the RAM is maintained.
PAGE 95
IMBA-C2060 ATX Motherboard Î TPM Support [Disable] Use the TPM Support option to configure support for the TPM. Î Disable DEFAULT TPM support is disabled. Î Enable TPM support is enabled. 5.3.3 CPU Configuration Use the CPU Configuration menu (BIOS Menu 5) to enter the CPU Information submenu or enable Intel Virtualization Technology. Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc.
PAGE 96
IMBA-C2060 ATX Motherboard Î Intel Virtualization Technology [Disabled] Use the Intel Virtualization Technology option to enable or disable virtualization on the system. When combined with third party software, Intel® Virtualization technology allows several OSs to run on the same system at the same time. Î Disabled DEFAULT Disables Intel Virtualization Technology. Î Enabled Enables Intel Virtualization Technology. 5.3.3.
PAGE 97
IMBA-C2060 ATX Motherboard Processor Cores: Lists the number of the processor core Intel HT Technology: Indicates if Intel HT Technology is supported by the CPU. Intel VT-x Technology: Indicates if Intel VT-x Technology is supported by the CPU. Intel SMX Technology: Indicates if Intel SMX Technology is supported by the CPU. L1 Data Cache: Lists the amount of data storage space on the L1 cache. L1 Code Cache: Lists the amount of code storage space on the L1 cache.
PAGE 98
IMBA-C2060 ATX Motherboard 5.3.4 SATA Configuration Use the SATA Configuration menu (BIOS Menu 7) to change and/or set the configuration of the SATA devices installed in the system. Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc. Advanced SATA Configuration (1) IDE Mode. (2) AHCI Mode. (3) RAID Mode.
PAGE 99
IMBA-C2060 ATX Motherboard Î Î Disable Disables SATA devices. Î IDE Mode Configures SATA devices as normal IDE device. Î AHCI Mode Î RAID Mode DEFAULT Configures SATA devices as AHCI device. Configures SATA devices as RAID device. Staggered Spin-up [Disabled] Staggered Spin-up allows the system to power up one drive at a time to prevent excess power consumption. Use the Staggered Spin-up option to enable or disable the staggered spin-up function.
PAGE 100
IMBA-C2060 ATX Motherboard Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc. Advanced Intel Trusted Execution Technology Configuration Intel TXT support only can be enabled/disabled if SMX is enabled. VT and VT-d support must also be enabled prior to TXT. Secure Mode Extensons (SMX) Enabled Intel TXT(LT) Support [Disabled] --------------------ÅÆ: Select Screen ↑ ↓: Select Item Enter Select + - Change Opt.
PAGE 101
IMBA-C2060 ATX Motherboard Î USB Support [Enabled] Use the USB Support option to enable or disable USB support on the system. Î Î Disabled Î Enabled USB support disabled DEFAULT USB support enabled Legacy USB Support [Enabled] Use the Legacy USB Support BIOS option to enable USB mouse and USB keyboard support. Normally if this option is not enabled, any attached USB mouse or USB keyboard does not become available until a USB compatible operating system is fully booted with all USB drivers loaded.
PAGE 102
IMBA-C2060 ATX Motherboard 5.3.7 Super IO Configuration Use the Super IO Configuration menu (BIOS Menu 10) to set or change the configurations for the FDD controllers, parallel ports and serial ports. Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc.
PAGE 103
IMBA-C2060 ATX Motherboard 5.3.7.1 Serial Port n Configuration Use the Serial Port n Configuration menu (BIOS Menu 11) to configure the serial port n. Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc. Advanced Serial Port n Configuration Serial Port Device Settings Enable or Disable Serial Port (COM) [Enabled] IO=3F8h; IRQ=4 --------------------ÅÆ: Select Screen ↑ ↓: Select Item Enter Select = - Change Opt.
PAGE 104
IMBA-C2060 ATX Motherboard Î Î Î Î IO=3F8h; Serial Port I/O port address is 3F8h and the interrupt IRQ=3, 4 address is IRQ3, 4 IO=2F8h; Serial Port I/O port address is 2F8h and the interrupt IRQ=3, 4 address is IRQ3, 4 IO=2C0h; Serial Port I/O port address is 2C0h and the interrupt IRQ=3, 4 address is IRQ3, 4 IO=2C8h; Serial Port I/O port address is 2C8h and the interrupt IRQ=3, 4 address is IRQ3, 4 5.3.7.1.
PAGE 105
IMBA-C2060 ATX Motherboard Î IO=2C8h; Serial Port I/O port address is 2C8h and the interrupt IRQ=3, 4 address is IRQ3, 4 5.3.7.1.3 Serial Port 3 Configuration Î Serial Port [Enabled] Use the Serial Port option to enable or disable the serial port. Î Î Disabled Î Enabled Disable the serial port DEFAULT Enable the serial port Change Settings [Auto] Use the Change Settings option to change the serial port IO port address and interrupt address.
PAGE 106
IMBA-C2060 ATX Motherboard 5.3.7.1.4 Serial Port 4 Configuration Î Serial Port [Enabled] Use the Serial Port option to enable or disable the serial port. Î Î Disabled Î Enabled Disable the serial port DEFAULT Enable the serial port Change Settings [Auto] Use the Change Settings option to change the serial port IO port address and interrupt address. Î Auto DEFAULT The serial port IO port address and interrupt address are automatically detected.
PAGE 107
IMBA-C2060 ATX Motherboard 5.3.7.1.5 Serial Port 5 Configuration Î Serial Port [Enabled] Use the Serial Port option to enable or disable the serial port. Î Î Disabled Î Enabled Disable the serial port DEFAULT Enable the serial port Change Settings [Auto] Use the Change Settings option to change the serial port IO port address and interrupt address. Î Auto DEFAULT The serial port IO port address and interrupt address are automatically detected.
PAGE 108
IMBA-C2060 ATX Motherboard Î Î Disabled Î Enabled Disable the serial port DEFAULT Enable the serial port Change Settings [Auto] Use the Change Settings option to change the serial port IO port address and interrupt address. Î Auto DEFAULT The serial port IO port address and interrupt address are automatically detected.
PAGE 109
IMBA-C2060 ATX Motherboard 5.3.7.2 Parallel Port Configuration Use the Parallel Port Configuration menu (BIOS Menu 11) to configure the serial port n. Aptio Setup Utility – Copyright (C) 2010 American Megatrends, Inc. Advanced Parallel Port Configuration Parallel Port Device Settings Change the Printer Port mode [Enabled] IO=378h; IRQ=7 --------------------ÅÆ: Select Screen ↑ ↓: Select Item Enter Select F1 General Help F2 Previous Values F3 Optimized Defaults F4 Save ESC Exit Version 2.11.1210.
PAGE 110
IMBA-C2060 ATX Motherboard Î Î IO=3BCh; Parallel Port I/O port address is 3BCh and the IRQ=7 interrupt address is IRQ7 Device Mode [Printer Mode] Use the Device Mode option to select the mode the parallel port operates in. Configuration options are listed below. Printer Mode SPP Mode EPP-1.9 and SPP Mode EPP-1.7 and SPP Mode ECP Mode ECP and EPP 1.9 Mode ECP and EPP 1.7 Mode Default 5.3.
PAGE 111
IMBA-C2060 ATX Motherboard Î PC Health Status The following system parameters and values are shown. The system parameters that are monitored are: System Temperatures: o o System Temperature Fan Speeds: o o CPU Temperature CPU Fan Speed System Fan Speed Voltages: o o o o o o o VCC3V Vcore +1.05V VDDR VSB3V VBAT 5VSB 5.3.8.1 FAN 1 Configuration Use the FAN 1 Configuration submenu (BIOS Menu 14) to configure fan 1 temperature and speed settings.
PAGE 112
IMBA-C2060 ATX Motherboard Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc. Advanced PC Health Status CPU Smart Fan control Target Temp Sensor Temperature Bound 1 Temperature Bound 2 Temperature Bound 3 Temperature Bound 4 Segment 1 Speed (%) Segment 2 Speed (%) Segment 3 Speed (%) Segment 4 Speed (%) Segment 5 Speed (%) Full Speed Count [Auto by RPM] [CPU Temperature] 60 50 40 30 100 85 70 60 50 3000 --------------------ÅÆ: Select Screen ↑ ↓: Select Item Enter Select + - Change Opt.
PAGE 113
IMBA-C2060 ATX Motherboard Î Î Î System Sets the target temperature sensor to the System Temperature1 Temperature1 setting. System Sets the target temperature sensor to the System Temperature2 Temperature2 setting. Temperature Bound n Use the + or – key to change the fan Temperature Bound n value. Enter a decimal number between 0 and 127. Î Segment n Speed (%) Use the + or – key to change the fan Segment n Speed value in percentage. Enter a decimal number between 0 and 100.
PAGE 114
IMBA-C2060 ATX Motherboard Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc. Advanced PC Health Status CPU Smart Fan control Target Temp Sensor Temperature Bound 1 Temperature Bound 2 Temperature Bound 3 Temperature Bound 4 Segment 1 Speed (PWM) Segment 1 Speed (PWM) Segment 1 Speed (PWM) Segment 1 Speed (PWM) Segment 1 Speed (PWM) [Auto by Duty-Cycle] [CPU Temperature] 60 50 40 30 100 85 70 60 50 --------------------ÅÆ: Select Screen ↑ ↓: Select Item Enter Select + - Change Opt.
PAGE 115
IMBA-C2060 ATX Motherboard Î Î Î System Sets the target temperature sensor to the System Temperature1 Temperature1 setting. System Sets the target temperature sensor to the System Temperature2 Temperature2 setting. Temperature Bound n Use the + or – key to change the fan Temperature Bound n value. Enter a decimal number between 0 and 127. Î Segment 1 Speed (PWM) Use the + or – key to change the fan Segment 1 Speed value in Pulse Width Modulation (PWM). Enter a decimal number between 0 and 100.
PAGE 116
IMBA-C2060 ATX Motherboard Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc.
PAGE 117
IMBA-C2060 ATX Motherboard Î Î The target terminal type is ANSI ANSI Bits per second [115200] Use the Bits per second option to specify the serial port transmission speed. The speed must match the other side. Long or noisy lines may require lower speeds. Î 9600 Sets the serial port transmission speed at 9600. Î 19200 Sets the serial port transmission speed at 19200. Î 38400 Sets the serial port transmission speed at 38400. Î 57600 Sets the serial port transmission speed at 57600.
PAGE 118
IMBA-C2060 ATX Motherboard Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc. Main Advanced Chipset Boot Security Save & Exit > > > > North Bridge South Bridge Integrated Graphics ME Subsystem North Bridge Parameters --------------------ÅÆ: Select Screen ↑ ↓: Select Item Enter Select + - Change Opt. F1 General Help F2 Previous Values F3 Optimized Defaults F4 Save & Exit ESC Exit Version 2.11.1210. Copyright (C) 2011 American Megatrends, Inc. BIOS Menu 17: Chipset 5.4.
PAGE 119
IMBA-C2060 ATX Motherboard Î Initiate Graphic Adapter [PEG/IGD] Use the Initiate Graphic Adapter option to select the graphics controller used as the primary boot device. Select either an integrated graphics controller (IGD) or a combination of PCI graphics controller, a PCI express (PEG) controller or an IGD.
PAGE 120
IMBA-C2060 ATX Motherboard Î 288 MB of memory used by internal graphics 288 M device Î 320 MB of memory used by internal graphics 320 M device Î 352 MB of memory used by internal graphics 352 M device Î 384 MB of memory used by internal graphics 384 M device Î 416 MB of memory used by internal graphics 416 M device Î 448 MB of memory used by internal graphics 448 M device Î 480 MB of memory used by internal graphics 480 M device Î PCI Express Port [Enabled] Use the PCI Express Po
PAGE 121
IMBA-C2060 ATX Motherboard Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc.
PAGE 122
IMBA-C2060 ATX Motherboard Î Restore on AC Power Loss [Power Off] Use the Restore on AC Power Loss BIOS option to specify what state the system returns to if there is a sudden loss of power to the system. Î Power Off Î Power On Î Last State The system remains turned off DEFAULT The system turns on The system returns to its previous state. If it was on, it turns itself on. If it was off, it remains off.
PAGE 123
IMBA-C2060 ATX Motherboard Î Î Disabled Î Enabled Disables Resume on PS/2 option DEFAULT Enables Resume on PS/2 option Azalia HD Audio [Enabled] Use the Azalia HD Audio option to enable or disable the High Definition Audio controller.
PAGE 124
IMBA-C2060 ATX Motherboard Î PCIe LAN PXE Boot [Disabled] Use the PCIe LAN PXE Boot option to enable or disable the boot option for the PCIe LAN PXE. Î Î Disabled Î Enabled DEFAULT Disables PCIe LAN PXE Boot option Enables PCIe LAN PXE Boot option PCIe USB3.0 Controller [Enabled] Use the PCIe USB3.0 Controller option to enable or disable the PCI Express USB 3.0 controller. Î Î Disabled Î Enabled The onboard USB 3.0 controller is disabled DEFAULT The onboard USB 3.
PAGE 125
IMBA-C2060 ATX Motherboard Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc. Advanced Intel IGD SWSCI OpRegion Configuration DVMT Mode Select DVMT Memory Select DVMT Mode used by Internal Graphics Device [DVMT Mode] [Maximum] --------------------ÅÆ: Select Screen ↑ ↓: Select Item Enter Select +/-: Change Opt. F1 General Help F2 Previous Values F3 Optimized Defaults F4 Save ESC Exit Version 2.11.1211. Copyright (C) 2011 American Megatrends, Inc.
PAGE 126
IMBA-C2060 ATX Motherboard AUTO CRT DVI HDMI DEFAULT 5.4.4 ME Subsystem Use the ME Subsystem menu (BIOS Menu 21) to configure the Intel® Management Engine (ME) configuration options. Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc. Chipset Intel ME Subsystem Configuration MEBx Mode Help ME Version 7.0.10.1203 MEBx Mode [Normal] Unconfigure AMT/ME [Disabled] --------------------ÅÆ: Select Screen ↑ ↓: Select Item Enter Select + - Change Opt.
PAGE 127
IMBA-C2060 ATX Motherboard Î Unconfigure AMT/ME [Disabled] Use the Unconfigure AMT/ME option to perform AMT/ME unconfigure without password operation. Î Disabled Î Enabled DEFAULT Disable AMT/ME unconfigure Enable AMT/ME unconfigure 5.5 Boot Use the Boot menu (BIOS Menu 22) to configure system boot options. Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc.
PAGE 128
IMBA-C2060 ATX Motherboard Î Does not enable the keyboard Number Lock Off automatically. To use the 10-keys on the keyboard, press the Number Lock key located on the upper left-hand corner of the 10-key pad. The Number Lock LED on the keyboard lights up when the Number Lock is engaged. Î Quiet Boot [Enabled] Use the Quiet Boot BIOS option to select the screen display when the system boots.
PAGE 129
IMBA-C2060 ATX Motherboard 5.6 Security Use the Security menu (BIOS Menu 23) to set system and user passwords. Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc. Main Advanced Chipset Boot Security Save & Exit Password Description Set Setup Administrator Password If ONLY the Administrator’s password is set, then this only limits access to Setup and is only asked for when entering Setup.
PAGE 130
IMBA-C2060 ATX Motherboard 5.7 Exit Use the Exit menu (BIOS Menu 24) to load default BIOS values, optimal failsafe values and to save configuration changes. Aptio Setup Utility – Copyright (C) 2011 American Megatrends, Inc. Main Advanced Chipset Boot Security Save & Exit Save Changes and Reset Discard Changes and Reset Exit the system after saving the changes. Restore Defaults Save as User Defaults Restore User Defaults --------------------ÅÆ: Select Screen ↑ ↓: Select Item Enter Select + - Change Opt.
PAGE 131
IMBA-C2060 ATX Motherboard Î Save as User Defaults Use the Save as User Defaults option to save the changes done so far as user defaults. Î Restore User Defaults Use the Restore User Defaults option to restore the user defaults to all the setup options.
PAGE 132
IMBA-C2060 ATX Motherboard Chapter 6 6 Software Drivers Page 116
PAGE 133
IMBA-C2060 ATX Motherboard 6.1 Available Software Drivers NOTE: The content of the CD may vary throughout the life cycle of the product and is subject to change without prior notice. Visit the IEI website or contact technical support for the latest updates. The following drivers can be installed on the system: Chipset Graphic LAN Audio USB 3.0 Intel® AMT o o Intel® Management Engine Components driver Intel® IT Director application Installation instructions are given below. 6.
PAGE 134
IMBA-C2060 ATX Motherboard Figure 6-1: Introduction Screen Step 3: Click IMBA-C2060. Step 4: A new screen with a list of available drivers appears (Figure 6-2). Figure 6-2: Available Drivers Step 5: Install all of the necessary drivers in this menu.
PAGE 135
IMBA-C2060 ATX Motherboard 6.3 Chipset Driver Installation To install the chipset driver, please do the following. Step 1: Access the driver list. (See Section 6.2) Step 2: Click “Chipset”. Step 3: Locate the setup file and double click on it. Step 4: The setup files are extracted as shown in Figure 6-3. Figure 6-3: Chipset Driver Screen Step 5: When the setup files are completely extracted the Welcome Screen in Figure 6-4 appears. Step 6: Click Next to continue.
PAGE 136
IMBA-C2060 ATX Motherboard Figure 6-4: Chipset Driver Welcome Screen Step 7: The license agreement in Figure 6-5 appears. Step 8: Read the License Agreement. Step 9: Click Yes to continue. Figure 6-5: Chipset Driver License Agreement Step 10: The Read Me file in Figure 6-6 appears.
PAGE 137
IMBA-C2060 ATX Motherboard Step 11: Click Next to continue. Figure 6-6: Chipset Driver Read Me File Step 12: Setup Operations are performed as shown in Figure 6-7. Step 13: Once the Setup Operations are complete, click Next to continue.
PAGE 138
IMBA-C2060 ATX Motherboard Step 14: The Finish screen in Figure 6-8 appears. Step 15: Select “Yes, I want to restart this computer now” and click Finish.Step 0: Figure 6-8: Chipset Driver Installation Finish Screen 6.4 Graphics Driver Installation To install the Graphics driver, please do the following. Step 1: Access the driver list. (See Section 6.2) Step 2: Click “VGA” and select the folder which corresponds to the operating system. Step 3: Double click the setup file.
PAGE 139
IMBA-C2060 ATX Motherboard Figure 6-9: Graphics Driver Welcome Screen Step 6: The License Agreement in Figure 6-10 appears. Step 7: Click Yes to accept the agreement and continue. Figure 6-10: Graphics Driver License Agreement Step 8: Setup Operations are performed as shown in Figure 6-11.
PAGE 140
IMBA-C2060 ATX Motherboard Step 9: Once the Setup Operations are complete, click Next to continue. Figure 6-11: Graphics Driver Setup Operations Step 10: The Finish screen in Figure 6-12 appears. Step 11: Select “Yes, I want to restart this computer now” and click Finish.
PAGE 141
IMBA-C2060 ATX Motherboard 6.5 LAN Driver Installation To install the LAN driver, please do the following. Step 1: Access the driver list. (See Section 6.2) Step 2: Click “LAN”. Step 3: Locate the Autorun file and double click it. Step 4: The Intel® Network Connection menu in Figure 6-13 appears. Step 5: Click Install Drivers and Software. Figure 6-13: Intel® Network Connection Menu Step 6: The Welcome screen in Figure 6-14 appears.
PAGE 142
IMBA-C2060 ATX Motherboard Figure 6-14: LAN Driver Welcome Screen Step 7: Click Next to continue. Step 8: The License Agreement in Figure 6-15 appears. Step 9: Accept the agreement by selecting “I accept the terms in the license agreement”. Step 10: Click Next to continue.
PAGE 143
IMBA-C2060 ATX Motherboard Step 11: The Setup Options screen in Figure 6-16 appears. Step 12: Select program features to install. Step 13: Click Next to continue. Figure 6-16: LAN Driver Setup Options Step 14: The Ready to Install the Program screen in Figure 6-17 appears. Step 15: Click Install to proceed with the installation.
PAGE 144
IMBA-C2060 ATX Motherboard Figure 6-17: LAN Driver Installation Step 16: The program begins to install. Step 17: When the driver installation is complete, the screen in Figure 6-18 appears. Step 18: Click Finish to exit.
PAGE 145
IMBA-C2060 ATX Motherboard 6.6 Audio Driver Installation To install the audio driver, please do the following. Step 1: Access the driver list. (See Section 6.2) Step 2: Click “Audio” and select the folder which corresponds to the operating system. Step 3: Double click the setup file. Step 4: The InstallShield Wizard starts to extracting files (Figure 6-19). Figure 6-19: Audio Driver – Extracting Files Step 5: The Audio Driver Welcome message in Figure 6-20 appears.
PAGE 146
IMBA-C2060 ATX Motherboard Figure 6-20: Audio Driver Welcome Screen Step 7: The audio driver installation begins. See Figure 6-21. Figure 6-21: Audio Driver Installation Step 8: When the installation is complete, the screen in Figure 6-22 appears. Step 9: Select “Yes, I want to restart my computer now” and click Finish.
PAGE 147
IMBA-C2060 ATX Motherboard 6.7 USB 3.0 Driver Installation To install the touch panel software driver, please follow the steps below. Step 1: Access the driver list. (See Section 6.2) Step 2: Click “USB 3.0”. Step 3: Locate the setup file and double click on it. Step 4: A Welcome Screen appears (Figure 6-23). Step 5: Click Next to continue. Figure 6-23: USB 3.0 Driver Welcome Screen Step 6: The License Agreement shown in Figure 6-24 appears.
PAGE 148
IMBA-C2060 ATX Motherboard Figure 6-24: USB 3.0 Driver License Agreement Step 8: The Install screen appears and displays the progress of the installation (Figure 6-25). 9 Figure 6-25: USB 3.0 Driver Installation Screen Step 9: When the installation is complete, click FINISH to exit setup. (Figure 6-26).
PAGE 149
IMBA-C2060 ATX Motherboard Figure 6-26: USB 3.0 Driver Update Complete 6.8 Intel® AMT Driver and Application 6.8.
PAGE 150
IMBA-C2060 ATX Motherboard Step 4: Locate the setup file and double click it. Step 5: When the setup files are completely extracted the Welcome Screen in Figure 6-27 appears. Step 6: Click Next to continue. Figure 6-27: Intel® ME Driver Welcome Screen Step 7: The license agreement in Figure 6-28 appears. Step 8: Read the License Agreement. Step 9: Click Yes to continue.
PAGE 151
IMBA-C2060 ATX Motherboard Figure 6-28: Intel® ME Driver License Agreement Step 10: The Read Me file in Figure 6-29 appears. Step 11: Click Next to continue.
PAGE 152
IMBA-C2060 ATX Motherboard Step 12: Setup Operations are performed as shown in Figure 6-30. Step 13: Once the Setup Operations are complete, click Next to continue. Figure 6-30: Intel® ME Driver Setup Operations Step 14: The Finish screen in Figure 6-31 appears. Step 15: Select “Yes, I want to restart this computer now” and click Finish.
PAGE 153
IMBA-C2060 ATX Motherboard Figure 6-31: Intel® ME Driver Installation Finish Screen 6.8.2 Intel® IT Director Application Installation Intel® IT Director is an application that helps address key IT security, data protection and network health concerns of small businesses. To install the Intel® IT Director application, please do the following. NOTE: For Windows XP system, please make sure to install the .net Framework 3.5 before installing the Intel® IT Director application. The .net Framework 3.
PAGE 154
IMBA-C2060 ATX Motherboard Step 5: The Welcome Screen in Figure 6-32 appears. Step 6: Click Next to continue. Figure 6-32: IT Director Welcome Screen Step 7: The license agreement in Figure 6-33 appears. Step 8: Accept the agreement by selecting “I accept the terms in the license agreement”. Step 9: Click Next to continue.
PAGE 155
IMBA-C2060 ATX Motherboard Figure 6-33: IT Director License Agreement Step 10: Continue to choose the installation type and the destination folder for the IT Director application. Step 11: The Ready to Install the Program screen in Figure 6-34 appears. Step 12: Click Install to proceed with the installation.
PAGE 156
IMBA-C2060 ATX Motherboard Step 13: The program begins to install. Step 14: When the driver installation is complete, the screen in Figure 6-35 appears. Step 15: Click Next to configure the system for remote monitoring or Cancel to exit the program and configure the system later. Figure 6-35: IT Director Installation Complete Step 16: The Welcome Screen of the IT Director Configuration Tool in Figure 6-36 appears.
PAGE 157
IMBA-C2060 ATX Motherboard Figure 6-36: IT Director Configuration Tool Welcome Screen NOTE: It is recommended to open the Intel® IT Director Getting Started Guide shown in Figure 6-36 to fully understand the configuration process. Step 17: Select whether this is the first computer you are creating a password for IT Director. (Figure 6-37).
PAGE 158
IMBA-C2060 ATX Motherboard Figure 6-37: IT Director – Creating Password Step 18: Follow the instructions to create a new password or enter the password created previously. Step 19: When the configuration is complete, the screen in Figure 6-38 appears. Step 20: Click Finish to exit.
PAGE 159
IMBA-C2060 ATX Motherboard Step 0: NOTE: If the network connection doesn’t work after installing the Intel® IT Director in a Windows Vista system, please install the network adapter driver. The driver is located at \7-iAMT, iTPM Driver & Utility\AMT Hot Fix\V1.0C0206 of the driver CD. Follow the instruction in the Intel Website Message PDF file in the same folder to install the driver.
PAGE 160
IMBA-C2060 ATX Motherboard Appendix A A BIOS Options Page 144
PAGE 161
IMBA-C2060 ATX Motherboard Below is a list of BIOS configuration options in the BIOS chapter. System Overview .................................................................................................................75 Memory Information ............................................................................................................76 System Date [xx/xx/xx] ........................................................................................................76 System Time [xx:xx:xx] ...
PAGE 162
IMBA-C2060 ATX Motherboard CPU Smart Fan control [Auto by RPM]..............................................................................96 Target Temp. Sensor [CPU Temperature] .........................................................................96 Temperature Bound n..........................................................................................................97 Segment n Speed (%) ..........................................................................................................
PAGE 163
IMBA-C2060 ATX Motherboard Bootup NumLock State [On]............................................................................................ 111 Quiet Boot [Enabled] ........................................................................................................ 112 Option ROM Messages [Keep Current] .......................................................................... 112 Administrator Password ................................................................................................
PAGE 164
IMBA-C2060 ATX Motherboard Appendix B B One Key Recovery Page 148
PAGE 165
IMBA-C2060 ATX Motherboard B.1 One Key Recovery Introduction The IEI one key recovery is an easy-to-use front end for the Norton Ghost system backup and recovery tool. The one key recovery provides quick and easy shortcuts for creating a backup and reverting to that backup or for reverting to the factory default settings. The IEI One Key Recovery tool menu is shown below.
PAGE 166
IMBA-C2060 ATX Motherboard B.1.1 System Requirement NOTE: The recovery CD can only be used with IEI products. The software will fail to run and a warning message will appear when used on non-IEI hardware. To create the system backup, the main storage device must be split into two partitions (three partitions for Linux). The first partition will be for the operating system, while the second partition will be invisible to the operating system and contain the backup made by the one key recovery software.
PAGE 167
IMBA-C2060 ATX Motherboard NOTE: Specialized tools are required to change the partition size if the operating system is already installed. B.1.2 Supported Operating System The recovery CD is compatible with both Microsoft Windows and Linux operating system (OS). The supported OS versions are listed below. Microsoft Windows o o o o o o Windows XP (Service Pack 2 or 3 required) Windows Vista Windows 7 Windows CE 5.0 Windows CE 6.
PAGE 168
IMBA-C2060 ATX Motherboard NOTE: Installing unsupported OS versions may cause the recovery tool to fail. B.2 Setup Procedure for Windows Prior to using the recovery tool to backup or restore Windows system, a few setup procedures are required. Step 1: Hardware and BIOS setup (see Section B.2.1) 71 Step 2: Create partitions (see Section B.2.2) 71 Step 3: Install operating system, drivers and system applications (see Section B.2.3) 71 Step 4: Build-up recovery partition (see Section B.2.
PAGE 169
IMBA-C2060 ATX Motherboard Step 4: Turn on the system. Step 5: Press the key as soon as the system is turned on to enter the BIOS. Step 6: Select the connected optical disk drive as the 1st boot device. (Boot Æ Boot Device Priority Æ 1st Boot Device). Step 7: Save changes and restart the computer. Continue to the next section for instructions on partitioning the internal storage.Step0: B.2.
PAGE 170
IMBA-C2060 ATX Motherboard Step 3: The recovery tool setup menu is shown as below. Figure B-3: Recovery Tool Setup Menu Step 4: Press <5> then . Figure B-4: Command Mode Step 5: The command prompt window appears. Type the following commands (marked in red) to create two partitions. One is for the OS installation; the other is for saving recovery files and images which will be an invisible partition.
PAGE 171
IMBA-C2060 ATX Motherboard system32>format F: /fs:ntfs /q /v:Recovery /y system32>exit Figure B-5: Partition Creation Commands Page 155
PAGE 172
IMBA-C2060 ATX Motherboard NOTE: Use the following commands to check if the partitions were created successfully. Step 6: Press any key to exit the recovery tool and automatically reboot the system. Please continue to the following procedure: Build-up Recovery Partition.Step0: B.2.3 Install Operating System, Drivers and Applications Install the operating system onto the unlabelled partition.
PAGE 173
IMBA-C2060 ATX Motherboard B.2.4 Build-up Recovery Partition Step 1: Put the recover CD in the optical drive. Step 2: Start the system. Step 3: Boot the system from recovery CD. When prompted, press any key to boot from the recovery CD. It will take a while to launch the recovery tool. Please be patient! Figure B-6: Launching the Recovery Tool Step 4: When the recovery tool setup menu appears, press <2> then .
PAGE 174
IMBA-C2060 ATX Motherboard recovery files in Section B.2.2 is hidden and the recovery tool is saved in this 71 partition. Figure B-8: Build-up Recovery Partition Step 6: After completing the system configuration, press any key in the following window to reboot the system. Figure B-9: Press any key to continue Step 7: Eject the recovery CD.
PAGE 175
IMBA-C2060 ATX Motherboard B.2.5 Create Factory Default Image NOTE: Before creating the factory default image, please configure the system to a factory default environment, including driver and application installations. To create a factory default image, please follow the steps below. Step 1: Turn on the system. When the following screen displays (Figure B-10), press 71 the key to access the recovery tool.
PAGE 176
IMBA-C2060 ATX Motherboard Figure B-12: About Symantec Ghost Window Step 4: Use mouse to navigate to the option shown below (Figure B-13). 71 Figure B-13: Symantec Ghost Path Step 5: Select the local source drive (Drive 1) as shown in Figure B-14. Then click OK.
PAGE 177
IMBA-C2060 ATX Motherboard Figure B-14: Select a Local Source Drive Step 6: Select a source partition (Part 1) from basic drive as shown in Figure B-15. 71 Then click OK. Figure B-15: Select a Source Partition from Basic Drive Step 7: Select 1.2: [Recovery] NTFS drive and enter a file name called iei (Figure B-16). Click Save. The factory default image will then be saved in the 71 selected recovery drive and named IEI.GHO. WARNING: The file name of the factory default image must be iei.GHO.
PAGE 178
IMBA-C2060 ATX Motherboard Figure B-16: File Name to Copy Image to Step 8: When the Compress Image screen in Figure B-17 prompts, click High to make 71 the image file smaller.
PAGE 179
IMBA-C2060 ATX Motherboard Step 9: The Proceed with partition image creation window appears, click Yes to continue. Figure B-18: Image Creation Confirmation Step 10: The Symantec Ghost starts to create the factory default image (Figure B-19). 71 Figure B-19: Image Creation Process Step 11: When the image creation completes, a screen prompts as shown in Figure B-20. 71 Click Continue and close the Ghost window to exit the program.
PAGE 180
IMBA-C2060 ATX Motherboard Step 12: The recovery tool main menu window is shown as below. Press any key to reboot the system. Step0: Figure B-21: Press Any Key to Continue B.3 Setup Procedure for Linux The initial setup procedures for a Linux system are mostly the same with the procedure for Microsoft Windows. Please follow the steps below to setup the recovery tool for Linux OS. Step 1: Hardware and BIOS setup. Refer to Section B.2.1. 71 Step 2: Install Linux operating system.
PAGE 181
IMBA-C2060 ATX Motherboard NOTE: Please reserve enough space for partition 3 for saving recovery images. Figure B-22: Partitions for Linux Step 3: Create a recovery partition. Insert the recovery CD into the optical disk drive. Follow Step 1 ~ Step 3 described in Section B.2.2. Then type the following 71 commands (marked in red) to create a partition for recovery images.
PAGE 182
IMBA-C2060 ATX Motherboard Figure B-23: System Configuration for Linux Step 5: Access the recovery tool main menu by modifying the “menu.lst”. To first access the recovery tool main menu, the menu.lst must be modified. In Linux system, enter Administrator (root). When prompt appears, type: cd /boot/grub vi menu.lst Figure B-24: Access menu.lst in Linux (Text Mode) Step 6: Modify the menu.lst as shown below.
PAGE 183
IMBA-C2060 ATX Motherboard Step 7: The recovery tool menu appears. (Figure B-25) 71 Figure B-25: Recovery Tool Menu Step 8: Create a factory default image. Follow Step 2 ~ Step 12 described in Section B.2.5 to create a factory default image. 71 B.4 Recovery Tool Functions After completing the initial setup procedures as described above, users can access the recovery tool by pressing while booting up the system. The main menu of the recovery tool is shown below.
PAGE 184
IMBA-C2060 ATX Motherboard Figure B-26: Recovery Tool Main Menu The recovery tool has several functions including: 1. Factory Restore: Restore the factory default image (iei.GHO) created in Section B.2.5. 71 2. Backup system: Create a system backup image (iei_user.GHO) which will be saved in the hidden partition. 3. Restore your last backup: Restore the last system backup image 4. Manual: Enter the Symantec Ghost window to configure manually. 5. Quit: Exit the recovery tool and restart the system.
PAGE 185
IMBA-C2060 ATX Motherboard B.4.1 Factory Restore To restore the factory default image, please follow the steps below. Step 1: Type <1> and press in the main menu. Step 2: The Symantec Ghost window appears and starts to restore the factory default. A factory default image called iei.GHO is created in the hidden Recovery partition. Figure B-27: Restore Factory Default Step 3: The screen is shown as in Figure B-28 when completed. Press any key to 71 reboot the system.
PAGE 186
IMBA-C2060 ATX Motherboard B.4.2 Backup System To backup the system, please follow the steps below. Step 1: Type <2> and press in the main menu. Step 2: The Symantec Ghost window appears and starts to backup the system. A backup image called iei_user.GHO is created in the hidden Recovery partition. Figure B-29: Backup System Step 3: The screen is shown as in Figure B-30 when system backup is completed. 71 Press any key to reboot the system.
PAGE 187
IMBA-C2060 ATX Motherboard B.4.3 Restore Your Last Backup To restore the last system backup, please follow the steps below. Step 1: Type <3> and press in the main menu. Step 2: The Symantec Ghost window appears and starts to restore the last backup image (iei_user.GHO). Figure B-31: Restore Backup Step 3: The screen is shown as in Figure B-32 when backup recovery is completed. 71 Press any key to reboot the system.
PAGE 188
IMBA-C2060 ATX Motherboard B.4.4 Manual To restore the last system backup, please follow the steps below. Step 1: Type <4> and press in the main menu. Step 2: The Symantec Ghost window appears. Use the Ghost program to backup or recover the system manually. Figure B-33: Symantec Ghost Window Step 3: When backup or recovery is completed, press any key to reboot the system.
PAGE 189
IMBA-C2060 ATX Motherboard B.5 Other Information B.5.1 Using AHCI Mode or ALi M5283 / VIA VT6421A Controller When the system uses AHCI mode or some specific SATA controllers such as ALi M5283 or VIA VT6421A, the SATA RAID/AHCI driver must be installed before using one key recovery. Please follow the steps below to install the SATA RAID/AHCI driver. Step 1: Copy the SATA RAID/AHCI driver to a floppy disk and insert the floppy disk into a USB floppy disk drive.
PAGE 190
IMBA-C2060 ATX Motherboard Step 5: When the following window appears, press ~~to select “Specify Additional Device”. Step 6: In the following window, select a SATA controller mode used in the system. Then press . The user can now start using the SATA HDD.~~
~~PAGE 191~~
IMBA-C2060 ATX Motherboard Step 7: After pressing , the system will get into the recovery tool setup menu. Continue to follow the setup procedure from Step 4 in Section B.2.2 Create 71 Partitions to finish the whole setup process. B.5.2 System Memory Requirement To be able to access the recovery tool by pressing while booting up the system, please make sure to have enough system memory. The minimum memory requirement is listed below.
~~PAGE 192~~
~~IMBA-C2060 ATX Motherboard Appendix C C Terminology Page 176~~
~~PAGE 193~~
IMBA-C2060 ATX Motherboard AC ’97 Audio Codec 97 (AC’97) refers to a codec standard developed by Intel® in 1997. ACPI Advanced Configuration and Power Interface (ACPI) is an OS-directed configuration, power management, and thermal management interface. AHCI Advanced Host Controller Interface (AHCI) is a SATA Host controller register-level interface. ATA The Advanced Technology Attachment (ATA) interface connects storage devices including hard disks and CD-ROM drives to a computer.
~~PAGE 194~~
IMBA-C2060 ATX Motherboard DIMM Dual Inline Memory Modules are a type of RAM that offer a 64-bit data bus and have separate electrical contacts on each side of the module. DIO The digital inputs and digital outputs are general control signals that control the on/off circuit of external devices or TTL devices. Data can be read or written to the selected address to enable the DIO functions.
~~PAGE 195~~
IMBA-C2060 ATX Motherboard LVDS Low-voltage differential signaling (LVDS) is a dual-wire, high-speed differential electrical signaling system commonly used to connect LCD displays to a computer. POST The Power-on Self Test (POST) is the pre-boot actions the system performs when the system is turned-on. RAM Random Access Memory (RAM) is volatile memory that loses data when power is lost. RAM has very fast data transfer rates compared to other storage like hard drives.
~~PAGE 196~~
~~IMBA-C2060 ATX Motherboard Appendix D D Digital I/O Interface Page 180~~
~~PAGE 197~~
IMBA-C2060 ATX Motherboard D.1 Introduction The DIO connector on the IMBA-C2060 is interfaced to GPIO ports on the Super I/O chipset. The DIO has both 4-bit digital inputs and 4-bit digital outputs. The digital inputs and digital outputs are generally control signals that control the on/off circuit of external devices or TTL devices. Data can be read or written to the selected address to enable the DIO functions. NOTE: For further information, please refer to the datasheet for the Super I/O chipset. D.
~~PAGE 198~~
~~IMBA-C2060 ATX Motherboard D.3.2 Enable the DIO Output Function The BIOS interrupt call INT 15H controls the digital I/O. An assembly program to enable digital I/O output functions is listed below.~~
~~PAGE 199~~
~~IMBA-C2060 ATX Motherboard Appendix E E Watchdog Timer Page 183~~
~~PAGE 200~~
IMBA-C2060 ATX Motherboard NOTE: The following discussion applies to DOS environment. Contact IEI support or visit the IEI website for specific drivers for other operating systems. The Watchdog Timer is provided to ensure that standalone systems can always recover from catastrophic conditions that cause the CPU to crash. This condition may have occurred by external EMIs or a software bug.
~~PAGE 201~~
~~IMBA-C2060 ATX Motherboard NOTE: When exiting a program it is necessary to disable the Watchdog Timer, otherwise the system resets.~~
~~PAGE 202~~
~~IMBA-C2060 ATX Motherboard Appendix F F Intel® Matrix Storage Manager Page 186~~
~~PAGE 203~~
IMBA-C2060 ATX Motherboard F.1 Introduction The IMBA-C2060 can provide data protection for serial ATA (SATA) disks via the Intel® Matrix Storage Manager using one of three fault-tolerant RAID levels: RAID 1, 5 or 10. When using two hard drives, matrix RAID allows RAID 0 and RAID 1 functions to be combined, where critical files can be stored on RAID 1, and RAID 0 can be used for non-critical items such as software.
~~PAGE 204~~
IMBA-C2060 ATX Motherboard CAUTION! Do not accidentally disconnect the SATA drive cables. Carefully route the cables within the chassis to avoid system down time. F.2 Features and Benefits Supports RAID levels 0, 1, 5 and 10 Supports connectivity to two or more disk drives Supported Operating Systems include: Windows XP, Windows Server 2003 and Windows Vista F.3 Accessing the Intel® Matrix Storage Manager To access the Intel® Matrix Storage Manager, please follow the steps below.
~~PAGE 205~~
IMBA-C2060 ATX Motherboard appear during the POST. Refer to the applicable BIOS configuration section in this user manual. Step 4: Save and Exit BIOS. After the SATA support option is enabled, save and exit the BIOS. Step 5: Reboot the system. Reboot the system after saving and exiting the BIOS. Step 6: Press Ctrl+I. during the system boot process, press Ctrl+I when prompted to enter the RAID configuration software. Step 7: Configure the RAID settings.
~~PAGE 206~~
~~IMBA-C2060 ATX Motherboard Appendix G G Hazardous Materials Disclosure Page 190~~
~~PAGE 207~~
IMBA-C2060 ATX Motherboard G.1 Hazardous Materials Disclosure Table for IPB Products Certified as RoHS Compliant Under 2002/95/EC Without Mercury The details provided in this appendix are to ensure that the product is compliant with the Peoples Republic of China (China) RoHS standards. The table below acknowledges the presences of small quantities of certain materials in the product, and is applicable to China RoHS only.
~~PAGE 208~~
IMBA-C2060 ATX Motherboard Part Name Toxic or Hazardous Substances and Elements Lead Mercury Cadmium Hexavalent Polybrominated Polybrominated (Pb) (Hg) (Cd) Chromium Biphenyls Diphenyl (CR(VI)) (PBB) Ethers (PBDE) Housing O O O O O O Display O O O O O O Printed Circuit O O O O O O O O O O O O O O O O O O Fan Assembly O O O O O O Power Supply O O O O O O O O O O O O Board Metal Fasteners Cable Assembly Assemblies Battery O: This toxic or
~~PAGE 209~~
IMBA-C2060 ATX Motherboard 此附件旨在确保本产品符合中国 RoHS 标准。以下表格标示此产品中某有毒物质的含量符合中国 RoHS 标准规定的限量要求。本产品上会附有”环境友好使用期限”的标签，此期限是估算这些物质”不会有泄漏或突变”的年限。本产品可能包含有较短的环境友好使用期限的可替换元件，像是电池或灯管，这些元件将会单独标示出来。部件名称有毒有害物质或元素铅汞镉六价铬多溴联苯多溴二苯 (Pb) (Hg) (Cd) (CR(VI)) (PBB) 醚 (PBDE) 壳体 O O O O O O 显示 O O O O O O 印刷电路板 O O O O O O 金属螺帽 O O O O O O 电缆组装 O O O O O O 风扇组装 O O O O O O 电力供应组装 O O O O O O 电池 O O O O O O O: 表示该有毒有害物质在该部件所有物质材料中的含量均在 SJ/T11363-2006 标准规定的限