User guide

528/17/2011158
Page 52
IMBA-G410 ATX Motherboard
Figure 4-10: COM 2 Function Select Jumper Location
4.4.4 CompactFlash® Setup
Jumper Label: JP2
Jumper Type:
2-pin header
Jumper Settings:
See
Table 4-5
Jumper Location:
See
Figure 4-11
The CompactFlash® slot is connected through an IDE connection. This jumper sets the
CompactFlash® card as the master or slave IDE device.
Setting Description
Short Master (Default)
Open Slave
Table 4-5: CompactFlash® Setup Jumper Settings
Figure 4-11: CompactFlash® Setup Jumper Location